CSTN05

Abstract: To protect audio amplifiers and other automotive electronic circuits during a voltage event directly connected to the car battery, the circuit shown is added (a shunt regulator, a diode a...[Details]

This circuit uses an attenuator field effect transistor (FET) to shunt the signal to ground. The R2 is used to control the output level (attenuation level), but you can use other sources of voltage s...[Details]

Currently, the function of customizing the waveform area for FFT analysis is not supported. However, you can select the waveform area for FFT analysis by the following operations: (1) Select a larger...[Details]

----- Using Mixed Signal Oscilloscopes to Debug Embedded Mixed Signal Designs Today’s embedded designs based on microcontrollers (MCUs) and digital signal processors (DSPs) typically have both analog...[Details]

　　Colorimeter principle: When monochromatic light passes through a solution of the same thickness but very low concentration, according to the Lambert-Beer law, the degree to which the light is absorb...[Details]

      On the evening of February 7, Shen Yiren posted on Weibo that he wanted to change his mobile phone because it was too heavy and his wrist could not bear it. 　　It is reported that Shen Yiren is ...[Details]

Further expanding the company’s leadership in deep silicon etch technology, new semiconductor manufacturing solutions support chip development for automotive and smart technology On ...[Details]

There are many types of fiber lasers, which can be classified in many different ways according to their lasing mechanism, device structure and output laser characteristics. According to the curre...[Details]

At present, the first batch of equipment for the Nantong Yueya Semiconductor Project has entered the factory for debugging and is scheduled to be put into production before the end of June. According...[Details]

motivation I use VSCode + PlatformIO for development under Linux. Because of the font code prompts in VSCode's interface and the customized JetBrain-style shortcut keys, the development experience is...[Details]

IIC (Inter-Intergrated Circuit) bus is a two-wire serial bus developed by PHILIPS. It is used to connect microcontrollers and their peripheral devices. IIC only needs two wires, SDA (data line) and SC...[Details]

Recently, four students from the Diocesan Boys' School in Hong Kong developed an ultra-small humanoid robot with a height of only 141 mm , which once again broke the record of "the world's ...[Details]

The disadvantages of current semiconductor lighting are mainly in the following aspects: 1. Low light efficiency of high-power LED applications The commercialized high-power light-emitt...[Details]

1 Introduction After use and development, there are many serial communication interface standards, but they are all improved on the basis of RS-232C. The RS-232C standard is a communication protocol ...[Details]

The ARM connector armlink connects the compiled ELF format file and the related C/C++ runtime library to generate the corresponding result file. armlink can complete the following operations: **Conne...[Details]