An industrial sensor development board launched by ST, equipped with an Arduino UNO R3 connector, can be directly connected to the STM32 Nucleo development board or other development boards that suppo...
Author: Weisheng CHEN, ST engineer
Click to download the pdf document:Keywords: BlueNRG-2, GPIO, port hold, pulse.Problem: Some customers have reported that in BlueNRG-2 applications, GPIO pins config...
The thing is, I am designing a brushless motor control board, which is divided into the main control board and the power amplifier board. I have the main control board schematic diagram, but I can't d...
1. Power on reset, generate reset interrupt request, power on interrupt does not need to be confirmed, execute directly. 2. STW B0,*--B15; perform scene protection 3. MVKL addr,B0; MVKH addr,B0; load ...
Today I tested OV2640, using the example program https://github.com/verimake-team/SparkRoad-V/tree/master/demo/16_ov2640_sdram, but the result was not very satisfactory. I have used this OV2640 before...
Dual-channel signal sources naturally need to see the difference between dual-channel and single-channel signal sources. A single-channel signal source outputs only one channel, without a comparison c...