The 0-10V analog signal is converted into a modulated signal by the APC chip GP9301M, and then transmitted to the PAC chip GP8101M after passing through the isolation capacitor. The GP8101M demodulate...
IntroductionThe HPM6700/6400 series MCU is a high-performance real-time RISC-V microcontroller from Shanghai Xianji Semiconductor Technology Co., Ltd., which provides great computing power, efficient ...
RISC-V is an open source instruction set architecture (ISA) based on the Reduced Instruction Set (RISC). It is a completely open instruction set that can be freely used by academic institutions or com...
485 point-to-multiple communication, using modbus communication protocol, daisy-type connection, FPGA sends data, and two devices are mounted to receive data (address 01 and 02). It is sent in serial ...
A device was returned for repair in the project. During the investigation, it was found that the BOOT program was missing, the application program was normal, and the BOOT area stored garbled code. Th...
Light display with delay program After the previous stage of learning, we finally wrote a program that can control the change of light. In practical applications, this program can be used to contro...