SM1100C SERIES
n
n
n
CMOS COMPATIBLE
WITH
TRI−STATE OUTPUT
SURFACE MOUNT OSCILLATORS IN PLASTIC PACKAGE
LAND PATTERN COMPATIBLE TO OUR ENTIRE SM1100X SERIES AND EPSON SG615
STANDARD SPECIFICATIONS:
Frequency Range
Frequency Stability over Operating
Temperature Range
Operating Temperature Range
Operable Supply Voltage (Vcc)
Symmetry (Duty Cycle)
(See next page for definition.)
Input Current (Icc) & Rise and Fall Time
(Tr & Tf) & Jitter
Logic “1” & Logic “0” (See next page)
Output Load
Tri-state Output
Packaging (see page R1, Figure 2)
1.000 MHz – 50.000 MHz (Consult factory for specific available frequencies)
±
50 PPM is standard, but
±
25 PPM is also available for certain frequencies.
0 - 70°C is standard, but can be extended to
−40
to +85°C for
certain frequencies
1.000 MHz – 30.000 MHz
30.001 MHz – 50.000 MHz
SM1100CY
SM1100CY
SM1100CV
5 Volt
±
10% or 3.3 Volt
±
10%
5 Volt
±
10% only
3.3 Volt
±
10% only
40/60 - 60/40% is standard, but 45/55% symmetry at 50% of Vcc
is also available.
Depends on frequency and output load. See next page.
90% of Vcc MIN.; 10% of Vcc MAX.
15 pF is standard. Contact factory for heavier loads.
Normal output when pin #1 is open (no connection);
Normal output when pin #1 is at logic “1”;
High-Impedance Output when pin #1 is at logic “0”.
24 mm tape, 330 mm reel: 1000 parts per reel.
For quantities <250: 23 parts per tube.
PART NUMBERING GUIDE:
n
The Pletronics part number for an SM1100C series oscillator consists of the following 3 elements:
1.
Overall Frequency Stability over Operating Temperature Range:
SM1145C:
±
50 PPM;
SM1144C:
±
25 PPM
Optional Alphabet Designator for Special Requirement:
SM1100CY: standard specifications;
SM1145CE: operating temperature range of -40 to +85°C;
SM1100CS: 45/55% symmetry at 50% of Vcc;
SM1100CV: operates at Vcc = 3.3V (only needed for over 30.000MHz)
(There are other alphabet designators not listed here.)
Frequency of Operation in MHz
2.
3.
EXAMPLES: SM1145CV-50.000 MHz; SM1145CS-10.000 MHz; SM1144CE-50.000 MHz
n
When customer’s requirements are non-standard, a special engineering part number will be assigned.
(continued)
Telephone: (425) 776-1880, Fax: (425) 776-2760, e-mail: ple-sales@pletronics.com
O7A
SM1100C SERIES
Input Current (Icc), Rise and Fall time with 15pF Load & Jitter
Frequency Range
(MHz)
1.000 – 7.999
8.000 – 23.999
24.000 – 29.999
30.000 – 50.000
Icc (mA)
Typical
5.0
8.0
10.0
25.0
Maximum
10.0
15.0
15.0
30.0
Tr & Tf (nS)
Typical
5.5
5.5
4.5
2.5
Maximum
6.5
6.5
5.5
3.5
Period Jitter RMS Values
(pS: 1 x 10
-12
Sec)
Typical
Maximum
30.0
50.0
30.0
50.0
20.0
30.0
15.0
25.0
Waveform
Recommended Test Circuit with CMOS Load
* CL (Capacitive Load): Includes the input capacitance of oscilloscope.
** 0.01µF
external
by-pass filter is recommended.
Package Outline (NOT TO SCALE):
PIN CONNECTIONS
PIN
1
2
3
4
CONNECTION
ENABLE/DISABLE INPUT
GROUND
OUTPUT
Vcc
INCHES (MILLIMETERS)
January 2000
O7B
Pletronics Inc., 19013 36
th
Ave. W., Suite H, Lynnwood, WA 98036-5761 USA
京公网安备 11010802033920号
EEWORLD
