10 ~ 12W AC-DC Single Output Wall-mounted type
Features :
Universal AC input / Full range
GS12U
series
No load power consumption< 0.3W
ErP step2 compliant
Meet EISA 2007 (Energy Independence and Security Act)
2 pole USA plug
Class
power (without earth pin)
Protections: Short circuit / Overload / Over Voltage / Over temperature
Fully enclosed plastic case
Approvals: UL / CUL / BSMI / CB / FCC
Pass LPS for full series
2 years warranty
SPECIFICATION
ORDER NO.
SAFETY MODEL NO.
DC VOLTAGE
RATED CURRENT
CURRENT RANGE
OUTPUT
RATED POWER
VOLTAGE TOLERANCE
Note.3
LINE REGULATION
LOAD REGULATION
Note.4
Note.5
GS12U05-P1I
GS12U05
5V
2.0A
0 ~ 2.0A
10W
5.0%
1.0%
5.0%
GS12U07-P1I
GS12U07
7.5V
1.6A
0 ~ 1.6A
12W
90mVp-p
4.0%
1.0%
4.0%
GS12U09-P1I
GS12U09
9V
1.33A
0 ~ 1.33A
12W
90mVp-p
4.0%
1.0%
4.0%
GS12U12-P1I
GS12U12
12V
1.0A
0 ~ 1.0A
12W
120mVp-p
3.0%
1.0%
3.0%
GS12U15-P1I
GS12U15
15V
0.8A
0 ~ 0.8A
12W
150mVp-p
3.0%
1.0%
3.0%
GS12U18-P1I
GS12U18
18V
0.67A
0 ~ 0.67A
12.06W
180mVp-p
3.0%
1.0%
2.0%
GS12U24-P1I
GS12U24
24V
0.5A
0 ~ 0.5A
12W
200mVp-p
3.0%
1.0%
2.0%
RIPPLE & NOISE (max.)
Note.2
75mVp-p
500ms, 20ms, 10ms/115VAC at full load
SETUP, RISE, HOLD UP TIME
500ms, 20ms, 30ms/230VAC
90 ~ 264VAC
135 ~ 370VDC
VOLTAGE RANGE
FREQUENCY RANGE
INPUT
EFFICIENCY (Typ.)
AC CURRENT
INRUSH CURRENT (max.)
LEAKAGE CURRENT (max.)
OVERLOAD
PROTECTION OVER VOLTAGE
OVER TEMPERATURE
Note.6
WORKING TEMP.
WORKING HUMIDITY
47 ~ 63Hz
76%
0.31A / 115VAC
78.5%
0.16A / 230VAC
45A / 230VAC
78.5%
78.5%
80%
80%
80.5%
COLD START 25A / 115VAC
0.25mA / 240VAC
>105% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
115% ~ 135%
Protection type : Clamp by zener diode
U1 Tj 140 typically (U1) Detect on main control IC
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
0 ~ +50
(Refer to "Derating Curve")
20% ~ 90% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY
-20 ~ +85 , 10 ~ 95% RH
TEMP. COEFFICIENT
0.03% / (0 ~ 40 )
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
VIBRATION
UL60950-1, CSA22.2, BSMI CNS14336 approved
SAFETY STANDARDS
SAFETY & WITHSTAND VOLTAGE
I/P-O/P:3KVAC
EMC
I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH
ISOLATION RESISTANCE
Compliance to FCC PART 15 / CISPR22 class B, CNS13438 class B
EMC EMISSION
1414.6Khrs min. MIL-HDBK-217F (25 )
MTBF
OTHERS
DIMENSION
PACKING
PLUG
CABLE
65*47*26.5mm (L*W*H)
0.15Kg ; 100pcs / 16Kg / CARTON
Standard type P1I: 2.1
* 5.5
* 9.5mm turning fork type, center positive for stock ; Other type available by customer requested
Standard type UL1185 6ft (4FT only for 5V output) for stock ; Other type available by customer requested
CONNECTOR
NOTE
1.All parameters are specified at 115VAC input, rated load, 25 70% RH ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
3.Tolerance: includes set up tolerance, line regulation, load regulation.
4.Line regulation is measured from low line to high line at rated load.
5.Load regulation is measured from 10% to 100% rated load.
6.The over temperature protection (OTP) is the built-in function of the control IC (U1). The activating level described above is based on the specification
provided by the IC manufacturer.
File Name:GS12U-SPEC 2011-06-14
Test/Measurement
京公网安备 11010802033920号
EEWORLD
