-
The timer/counter of the 51 microcontroller is a programmable component. Its working mode, initial counting value and start and stop operations should be initialized before the timer/counter works, t...[Details]
-
OFweek Cup · OFweek 2023 China
Robot
Industry Annual Selection (abbreviated as OFweek Robot Awards 2023) is jointly organized by OFweek, China's high-tech industry portal, and its authorita...[Details]
-
1 Introduction
In the post-PC era of the rapid development of information technology, computers, communications, and consumer electronics are integrated. Although computers and networks have f...[Details]
-
With the rapid development of radio frequency wireless products, the requirements for miniaturization, integrated modularization, and high frequency of microwave filters are becoming higher and highe...[Details]
-
There are no 16-bit operation instructions in 8-bit microcontrollers . All int data must be operated separately by two bytes. The method used is different, the generated code is different, and of cou...[Details]
-
MCP2510 is a CAN protocol controller from Microchip, which fully supports the CAN bus v2.0a/b technical specifications and can send and receive standard and extended messages. It also has acceptanc...[Details]
-
Preface PCROP is the abbreviation of Proprietary code readout protection, which means it is a proprietary code readout protection function. Unlike RDP, which protects the entire Flash, it only protec...[Details]
-
Generation of include/generated/asm-offsets.h and include/generated/generic-asm-offsets.h (taking include/generated/asm-offsets.h as an example) SPL more -Ispl/include -Ispl/. -DCONFIG_SPL_BUILD -ff...[Details]
-
The typical circuit of a switching power supply made with UC3842 is shown in Figure 1.
Overload and short circuit protection is generally achieved by connecting a resistor (R4) in series...[Details]
-
According to the program running process: Normal program startup process: when starting from FLASH, first enter from the physical address entry 0x08000000 of the flash memory, then the reset interrup...[Details]
-
Problem description: In the ADS1.2 environment, when using Jlink to connect to Zhou Ligong's EasyARM2131 development board, it prompts that it cannot connect to the CPU (JLINK could not find supporte...[Details]
-
How to display 0~F through digital tube? There are two types of digital tubes: common cathode and common anode. The anode of the common anode type is the common terminal, and the anode is the segment...[Details]
-
;P IC 16F877 MCU internal EEPROM reading and writing example**************************************************************************************** ; This is a program to test the function of read...[Details]
-
On March 8, SMIT Holdings issued an announcement stating that in view of the large amount of capital required to maintain EDA product development, the board of directors decided to formulate a plan t...[Details]
-
The new generation of servers based on NVIDIA Blackwell architecture are being shipped in batches, and at the OCP Summit 2024, the official held a public display, with the chips directly exposed fo...[Details]