CPL
Vishay Dale
Wirewound Resistors, Commercial Power, Axial Lead, Low Value
FEATURES
• High power to size ratio
• Low inductance, less than 5 nH
• Ceramic cases are available with circuit board
stand-offs (designated with a -3 model ending)
• Superior surge capability
• Extremely low resistance values
• Complete welded construction
• Special inorganic potting compound and
ceramic case provide high thermal conductivity
in a fireproof package
• Compliant to RoHS Directive 2002/95/EC
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL
CPL03
CPL03...3
CPL05
CPL05...3
CPL07
CPL07...3
CPL10
CPL10...3
CPL15
CPL15...3
HISTORICAL
MODEL
CPL-3
CPL-3-3
CPL-5
CPL-5-3
CPL-7
CPL-7-3
CPL-10
CPL-10-3
CPL-15
CPL-15-3
POWER RATING
P
40 °C
W
3
3
5
5
7
7
10
10
15
15
RESISTANCE
RANGE
0.01 to 0.10
0.01 to 0.10
0.01 to 0.10
0.01 to 0.10
0.01 to 0.10
0.01 to 0.10
0.01 to 0.10
0.01 to 0.10
0.01 to 0.10
0.01 to 0.10
TOLERANCE
±%
1, 3, 5, 10
1, 3, 5, 10
1, 3, 5, 10
1, 3, 5, 10
1, 3, 5, 10
1, 3, 5, 10
1, 3, 5, 10
1, 3, 5, 10
1, 3, 5, 10
1, 3, 5, 10
WEIGHT
(typical)
g
3.4
3.6
4.8
5.0
6.8
7.0
9.5
9.9
16.8
17.4
Note
(1)
Resistance is measured 3/8" [9.52 mm] from resistor body.
TECHNICAL SPECIFICATIONS
PARAMETER
Temperature Coefficient
Short Time Overload
Maximum Working Voltage
Operating Temperature Range
Terminal Strength
Dielectric Withstanding Voltage
UNIT
ppm/°C
-
V
°C
lb
V
AC
CPL RESISTOR CHARACTERISTICS
± 300
5 x rated power for 5 s
(P x
R)
1/2
- 65 to + 275
10 minimum
1000
GLOBAL PART NUMBER INFORMATION
Global Part Numbering example: CPL05R0500JB143
C
P
L
0
5
VALUE
R
0
5
0
0
J
B
1
4
3
SPECIAL
(Dash Number)
(up to 3 digits)
From
1 to 999
as applicable
GLOBAL MODEL
CPL03
CPL05
CPL07
CPL10
CPL15
TOLERANCE
F
= ± 1.0 %
G
= ± 2.0 %
H
= ± 3.0 %
J
= ± 5.0 %
K
= ± 10.0 %
PACKAGING
E14
= Lead (Pb)-free bulk
E31
= Lead (Pb)-free four layer bulk
E01
= Lead (Pb)-free skin pack
B14
= Tin/lead bulk
B31
= Tin/lead four layer bulk
J01
= Tin/lead skin pack
R
= Decimal
R1000
= 0.10
Historical Part Numbering example: CPL-5-3 0.05
5 % B14
CPL-5-3
HISTORICAL MODEL
0.05
RESISTANCE VALUE
5%
TOLERANCE CODE
B14
PACKAGING
* Pb containing terminations are not RoHS compliant, exemptions may apply
** Please see document “Vishay Material Category Policy”:
www.vishay.com/doc?99902
www.vishay.com
54
For technical questions, contact:
ww2aresistors@vishay.com
Document Number: 30212
Revision: 10-May-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
CPL
Wirewound Resistors, Commercial Power,
Axial Lead, Low Value
DIMENSIONS
in inches [millimeters]
CPLxx
1.0 [25.4]
minimum
A
E
B
C
0.125 [3.18]
typical
E
Vishay Dale
CPLxx...3
1.0 [25.4]
minimum
A
D
B
C
GLOBAL
MODEL
CPL03
CPL03...3
CPL05
CPL05...3
CPL07
CPL07...3
CPL10
CPL10...3
CPL15
CPL15...3
DIMENSIONS
in inches [millimeters]
A
(1)
± 0.031 [0.794]
0.875 [22.22]
0.875 [22.22]
0.875 [22.22]
0.875 [22.22]
1.391 [35.32]
1.391 [35.32]
1.875 [47.62]
1.875 [47.62]
1.875 [47.62]
1.875 [47.62]
B
± 0.031 [0.794]
0.313 [7.94]
0.313 [7.94]
0.375 [9.52]
0.375 [9.52]
0.375 [9.52]
0.375 [9.52]
0.375 [9.52]
0.375 [9.52]
0.500 [12.70]
0.500 [12.70]
C
± 0.031 [0.794]
0.313 [7.94]
0.313 [7.94]
0.344 [8.73]
0.344 [8.73]
0.344 [8.73]
0.344 [8.73]
0.344 [8.73]
0.344 [8.73]
0.500 [12.70]
0.500 [12.70]
D
± 0.031 [0.794]
-
0.375 [9.52]
-
0.406 [10.32]
-
0.469 [11.91]
-
0.469 [11.91]
-
0.625 [15.87]
E
± 0.001 [0.025]
0.036 [0.914]
0.036 [0.914]
0.036 [0.914]
0.036 [0.914]
0.036 [0.914]
0.036 [0.914]
0.036 [0.914]
0.036 [0.914]
0.036 [0.914]
0.036 [0.914]
Note
(1)
Potting compound may extend outside of ceramic case up to 0.060 [1.52] maximum per side.
MATERIAL SPECIFICATIONS
Element:
Self-supporting copper-nickel alloy or nickel-
chrome alloy, depending on resistance range
Body:
Steatite ceramic case with inorganic potting
compound
Terminals:
Tinned copper
Part Marking:
Dale, model, wattage, value, tolerance, date
code
DERATING
RATED POWER IN %
120
100
80
60
40
20
0
- 65 - 25
25
40
75
125
175
225
275
AMBIENT TEMPERATURE IN
°
C
PERFORMANCE
TEST
Thermal Shock
Short Time Overload
Dielectric Withstanding Voltage
Low Temperature Operation
Bias Humidity
Load Life
Terminal Strength
Resistance to Solder Heat
CONDITIONS OF TEST
- 55 °C to + 275 °C, 5 cycles, 30 min dwell time
5 x rated power for 5 s
1000 V
RMS
for 1 min
- 65 °C, full rated working voltage for 45 min
75 °C, 90 % to 100 % RH, 240 h
1000 h at rated power, + 40 °C, 1.5 h “ON”, 0.5 h “OFF”
5 s to 10 s 10 pound pull test, torsion test - 3 alternating directions,
360° each
Terminal immersed 3.5 s in molten solder at 1/8" to 3/16" from body
TEST LIMITS (EIA RS-344)
± (5.0 % + 0.05
) R
± (4.0 % + 0.05
) R
± (2.0 % + 0.05
) R
± (3.0 % + 0.05
) R
± (5.0 % + 0.05
) R
± (5.0 % + 0.05
) R
± (1.0 % + 0.05
) R
± (1.0 % + 0.05
) R
Document Number: 30212
Revision: 10-May-11
For technical questions, contact:
ww2aresistors@vishay.com
www.vishay.com
55
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
1
Document Number: 91000
京公网安备 11010802033920号
EEWORLD
