I would like to ask if anyone who has used nand flash has encountered a problem and cannot find the cause. At first, the default interface of nand flash is SDR mode. I configured the nand flash interf...
16.1 LCD Controller/Driver FunctionsThe functions of the LCD controller/driver built into the RL78/L13 are as follows:(1) It can select the normal LCD waveform (A waveform, B waveform) or the memory L...
1. TTL The main type of TTL integrated circuit is transistor-transistor logic gate, and most TTL uses 5V power supply. 1. Output high level Uoh and output low level Uol Uoh ≥ 2.4V, Uol ≤ 0.4V 2. Input...
Job Responsibilities
1. Have certain sub-module (including: unit circuit, logic, single board underlying software, single board hardware, etc.) development/test design practical experience, and be abl...
. The power module is mainly composed of the voltage regulator SA57022 produced by PHILIPS. SA57022 can be turned on or off through the ON/OFF pin. It cooperates with the LIN transceiver to realize th...