-
The industry discussion around the new infrastructure has made the Internet of Things a hot topic and also made the challenges facing the entire market clearer. Among them, price war is obviously one...[Details]
-
According to the latest list published by the United States Patent and Trademark Office (USPTO), Apple has obtained a new patent for a foldable phone. When detecting that an iPhone/iPad with a flex...[Details]
-
The Japanese MITSUMI high-output NMOS
LDO regulator
MM3501 series supports ultra-low saturation voltage drop. The MM3501 uses a 2-way input power supply to reduce the on-resistance of the p...[Details]
-
As an actuator, stepper motor is one of the key products of mechatronics and is widely used in various automatic control systems. With the development of microelectronics and computer techno...[Details]
-
3.1. Introduction The STM8 series is an 8-bit microcontroller produced by STMicroelectronics. This type of microcontroller is divided into three series: STM8A, STM8S, and STM8L. In this study, I used...[Details]
-
With the emergence of many new daily products, people's living standards and quality of life are constantly improving, and at the same time, people's traditional lifestyles are gradually changing. ...[Details]
-
Leng Jun, Chairman and Party Secretary of NARI Group Co., Ltd.
State Grid Corporation of China studies and implements General Secretary Xi Jinping’s important expositions on scientific and tec...[Details]
-
TrendForce, a research organization, announced the latest ranking results of global SSD module manufacturers' own-brand shipments in the channel market last year. Kingston of the United States firmly...[Details]
-
MCS-51 microcontroller has multiple interrupt sources. Taking 8051 as an example, there are 5 interrupt sources, two external interrupts, two timing interrupts and one serial interrupt. In this sec...[Details]
-
iQOO plans to launch the Neo5s smartphone on December 20. Before the release, the key configuration of this phone has been announced. Now, the high-resolution rendering of this phone has also surface...[Details]
-
W25Q64 SPI Configuration Steps 1. Enable SPI clock 2. Enable GPIO port clock 3. Initialize GPIO and configure pin mode 4. Initialize SPI 5. Enable SPI 6. SPI read and write data 7. Check SPI...[Details]
-
1 Introduction
Station power supply is the basis for the safe operation of substations. With the increasing degree of comprehensive automation of substations and the commissioning of a lar...[Details]
-
Source program:
The following program needs to use two timer resources. Any PIC microcontroller with two timers can implement it. The MCU required for this example is MICROCHIP PIC16C62
...[Details]
-
Below is a simple block diagram of S3C2440. We can burn the program to NandFlash and then set it to boot from NandFlash, or we can burn the program to NroFlash and then set it to boot from NorFlash...[Details]
-
Photovoltaic Headlines (WeChat ID: PV-2005) learned that on November 1, the Kunming Municipal Development and Reform Commission issued a notice on the issuance of the Interim Measures for Regulatin...[Details]