POR Specifications....................................................................................................................................................81
AS Configuration Timing............................................................................................................................................86
DCLK Frequency Specification in the AS Configuration Scheme....................................................................................... 87
Minimum Configuration Time Estimation......................................................................................................................91
Remote System Upgrades......................................................................................................................................... 93
User Watchdog Internal Circuitry Timing Specifications..................................................................................................93
Document Revision History for the Intel Arria 10 Device Datasheet.......................................................................................... 99
Intel
®
Arria
®
10 Device Datasheet
2
Send Feedback
A10-DATASHEET | 2019.06.24
Send Feedback
Intel
®
Arria
®
10 Device Datasheet
This datasheet describes the electrical characteristics, switching characteristics, configuration specifications, and I/O timing
for Intel
®
Arria
®
10 devices.
Intel Arria 10 devices are offered in extended and industrial grades. Extended devices are offered in –E1 (fastest), –E2, and –
E3 speed grades. Industrial grade devices are offered in the –I1, –I2, and –I3 speed grades.
The suffix after the speed grade denotes the power options offered in Intel Arria 10 devices.
•
•
•
•
L—enables the device to operate at low static power while maintaining excellent performance.
S—standard power specification.
V—enables the device to run at lower than default V
CC
, reducing static and dynamic power while retaining equivalent
performance.
H—small device with high performance at the fastest speed grade (–1).
Related Information
Intel Arria 10 Device Overview
Provides more information about the densities and packages of devices in the Intel Arria 10 family.
Electrical Characteristics
The following sections describe the operating conditions and power consumption of Intel Arria 10 devices.
Operating Conditions
Intel Arria 10 devices are rated according to a set of defined parameters. To maintain the highest possible performance and
reliability of the Intel Arria 10 devices, you must consider the operating requirements described in this section.
Intel Corporation. All rights reserved. Agilex, Altera, Arria, Cyclone, Enpirion, Intel, the Intel logo, MAX, Nios, Quartus and Stratix words and logos are trademarks
of Intel Corporation or its subsidiaries in the U.S. and/or other countries. Intel warrants performance of its FPGA and semiconductor products to current
specifications in accordance with Intel's standard warranty, but reserves the right to make changes to any products and services at any time without notice. Intel
assumes no responsibility or liability arising out of the application or use of any information, product, or service described herein except as expressly agreed to in
writing by Intel. Intel customers are advised to obtain the latest version of device specifications before relying on any published information and before placing
orders for products or services.
*Other names and brands may be claimed as the property of others.
ISO
9001:2015
Registered
Intel
®
Arria
®
10 Device Datasheet
A10-DATASHEET | 2019.06.24
Absolute Maximum Ratings
This section defines the maximum operating conditions for Intel Arria 10 devices. The values are based on experiments
conducted with the devices and theoretical modeling of breakdown and damage mechanisms. The functional operation of the
device is not implied for these conditions.
Caution:
Table 1.
Conditions outside the range listed in the following table may cause permanent damage to the device. Additionally, device
operation at the absolute maximum ratings for extended periods of time may have adverse effects on the device.
Absolute Maximum Ratings for Intel Arria 10 Devices
Symbol
V
CC
V
CCP
V
CCERAM
V
CCPT
V
CCBAT
V
CCPGM
V
CCIO
Core voltage power supply
Periphery circuitry and transceiver fabric interface power supply
Embedded memory power supply
Power supply for programmable power technology and I/O pre-driver
Battery back-up power supply for design security volatile key register
Configuration pins power supply
I/O buffers power supply
Description
Condition
—
—
—
—
—
(1)
Minimum
–0.50
–0.50
–0.50
–0.50
–0.50
–0.50
–0.50
–0.50
–0.50
–0.50
–0.50
–0.50
–0.50
–0.50
–0.50
–0.50
Maximum
1.21
1.21
1.36
2.46
2.46
2.46
4.10
2.46
2.46
1.34
1.34
2.46
1.27
4.10
2.46
2.46
Unit
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
continued...
3 V I/O
LVDS I/O
V
CCA_PLL
V
CCT_GXB
V
CCR_GXB
V
CCH_GXB
V
CCL_HPS
V
CCIO_HPS
Phase-locked loop (PLL) analog power supply
Transmitter power supply
Receiver power supply
Transceiver output buffer power supply
HPS core voltage and periphery circuitry power supply
HPS I/O buffers power supply
—
—
—
—
—
3 V I/O
LVDS I/O
V
CCIOREF_HPS
HPS I/O pre-driver power supply
—
(1)
The LVDS I/O values are applicable to all dedicated and dual-function configuration I/Os.
Intel
®
Arria
®
10 Device Datasheet
4
Send Feedback
Intel
®
Arria
®
10 Device Datasheet
A10-DATASHEET | 2019.06.24
Symbol
V
CCPLL_HPS
I
OUT
T
J
T
STG
HPS PLL power supply
DC output current per pin
Description
Condition
—
—
—
—
Minimum
–0.50
–25
(2)(3)(4)(5)
(6)
Maximum
2.46
25
125
150
Unit
V
mA
°C
°C
Operating junction temperature
Storage temperature (no bias)
–55
–65
Related Information
•
•
AN 692: Power Sequencing Considerations for Intel Cyclone 10 GX, Intel Arria 10, and Intel Stratix 10 Devices
Provides the power sequencing requirements for Intel Arria 10 devices.
Power-Up and Power-Down Sequences, Power Management in Intel Arria 10 Devices chapter
Provides the power sequencing requirements for Intel Arria 10 devices.
Maximum Allowed Overshoot and Undershoot Voltage
During transitions, input signals may overshoot to the voltage listed in the following table and undershoot to –2.0 V for input
currents less than 100 mA and periods shorter than 20 ns.
The maximum allowed overshoot duration is specified as a percentage of high time over the lifetime of the device. A DC signal
is equivalent to 100% duty cycle.
For example, a signal that overshoots to 2.70 V for LVDS I/O can only be at 2.70 V for ~4% over the lifetime of the device.
(2)
The maximum current allowed through any LVDS I/O bank pin when the device is not turned on or during power-up/power-down
conditions is 10 mA.
Total current per LVDS I/O bank must not exceed 100 mA.
Voltage level must not exceed 1.89 V.
Applies to all I/O standards and settings supported by LVDS I/O banks, including single-ended and differential I/Os.
Applies only to LVDS I/O banks. 3 V I/O banks are not covered under this specification and must be implemented as per the power
sequencing requirement. For more details, refer to
AN 692: Power Sequencing Considerations for Intel Cyclone
®
10 GX, Intel Arria
10, and Intel Stratix
®
10 Devices
and
Power Management in Intel Arria 10 Devices chapter.
Smart building technology is evolving to transform static buildings into dynamic, efficient entities. This evolution requires the use of multiple technologies to monitor more conditions in buildings. ...
In a bus communication system, how to automatically assign addresses to slaves.At present, the address setting of the slave is done by hardware: DIP switch. Is there a simple method to automatically a...
Experts, what parameters should I consider when selecting TVS? I am confused by the following parameters. What parameters should I consider when selecting? Can an expert tell me?...
Of all the test equipment that electronics engineers and technicians have at their disposal, the most useful is undoubtedly the oscilloscope. Oscilloscopes are powerful tools that allow electronics en...
ADI has compiled the[20 wonderful questions and answers] in the precision converter area in recent months for everyone. I hope you can use it~Click to view【Wonderful QA】FAQ
● About the hardware circui...
When the power is on and the load is not applied, I adjusted the voltage knob. When it reached 8V, I found that there was a burning smell and the area marked CR37 was black. Can someone tell me what i...
In the following content, the editor will report on the difference between type-c adapters and adapter cables. If Type-C is one of the focuses you want to know, you might as well read this article ...[Details]
Recently, the project "Electric Power Equipment Image Intelligent Recognition Platform and Application" by Dr. Yue Yishi's team of State Grid Hunan Electric Power won the first prize in the China E...[Details]
1.IIC initialization For specific clock settings, please refer to this article: https://blog.csdn.net/u014397533/article/details/46495905 void I2C_Init(void) { I2C_CR1 = 0x00; //Disable I2C...[Details]
The price of photovoltaic inverters has gradually decreased, and there is a slight price difference among some manufacturers.
Photovoltaic inverter (5kW) price monitoring: 5KW photovoltaic inv...[Details]
The picture below is the interrupt vector table of 2440 We can see that this interrupt vector table is 4-byte aligned The supervisor mode represents the management mode. This mode is equivalent t...[Details]
Technical inspection of DC to
AC inverters Structural requirements for pure sine wave inverters:
1. All fasteners of the inverter should have anti-corrosion plating or coating, and the fast...[Details]
The indication error of a measuring instrument refers to "the difference between the indication of the measuring instrument and the true value of the corresponding input quantity", the base error r...[Details]
The most discussed product this week is the iPhone 11 series released by Apple. There are three phones in the series. Because the upgrade did not exceed the expectations of the outside world, the tri...[Details]
China Energy Storage Network
: Energy chain refers to a collection of systems and activities such as discovering, possessing and fully utilizing energy and its derivative technologies. To som...[Details]
Recently, Tesla and Pinduoduo had a quarrel online, and Toyota, the big brother standing by, was secretly laughing. You should know that Toyota and Tesla have a big holiday. On July 1,...[Details]
1. What are bit segments and bit band alias areas?
2. What are the benefits?
Answer 1: Yes, remember MCS51? MCS51 has bit operation, which takes one bit (BIT) as the data object.
MCS51 ...[Details]
A network printer is a built-in or external print server that is connected to a local area network, the Internet, or a wireless network as an independent device, thereby freeing the printer from its ...[Details]
Despite some controversy, LiDAR is still the key to achieving mass production of L3 autonomous driving. The resulting problem is that since L3 requires better-performing LiDAR and the collection and ...[Details]
According to foreign media reports, Swift Navigation, a technology company headquartered in San Francisco, announced a partnership with Arm, which will provide developers of autonomous driving and in...[Details]
Abstract:
A good intelligent connected vehicle in-vehicle service ecosystem can not only promote the healthy development of the intelligent connected vehicle in-vehicle service market, but al...[Details]
Security Electronics
京公网安备 11010802033920号
EEWORLD
