2 mm x 2 mm Dual Insulator, Straight, Surface Mount
•
•
•
•
•
•
951 Series
High temperature dielectric
“No lead” reflow solder compatible
Maximizes use of PC board space
End stackable feature
Mates with boardmount products
See Regulatory Information Appendix for
chemical compliance information
Date Modified: February 14, 2008
TS-2159-B
Sheet 1 of 2
Physical
Insulation
Material:
Flammability:
Color:
Contact
Material:
Plating
Underplating:
Wiping Area:
Solder Tail Area:
High Temperature Thermoplastic
UL 94V-0
Black
Copper Alloy
1.25–2.5 µm [100 µ’’] Nickel
0.25 µm [10 µ’’] Gold
1–3 µm [40–118 µ’’] Matte Tin
Electrical
Current Rating:
Insulation Resistance:
Withstanding Voltage:
Transition Resistance:
1A
> 5 x 10
8
Ohm at 100 V
DC
1000 V
DC
≤ 20 mOhm
Environmental
Temperature Range:
-40 °C ... +105 °C
Processing Temperature:
max. 260 °C (Profile per J-STD-020C)
Moisture Sensitivity Level:
1 (per J-STD-020C)
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of the 3M Company
For technical, sales or ordering information
call your Local 3M Service Center
3M
™
Pin Strip Header
2 mm x 2 mm Dual Insulator, Straight, Surface Mount
951 Series
PCB-Layout
Contact Dimensions
Coding No.
A
Mating Length B
13
9.9
4.0
14
10.7
4.0
16
11.9
4.0
17
12.4
4.0
20
15.4
4.0
23
17.4
4.0
Others on Request
D
5.9
6.7
7.9
8.4
11.4
13.4
Contact Dimensions
Coding No.
A
Mating Length B
13
11.8
5.9
14
12.6
5.9
16
13.8
5.9
17
14.3
5.9
20
17.3
5.9
23
19.3
5.9
Others on Request
D
5.9
6.7
7.9
8.4
11.4
13.4
n = No. of Contacts
Tolerance Unless Noted [mm]
Nominal Size
0.5–3
3–6
6–30
Linear Dim
+/- 0.1 +/- 0.1 +/- 0.2
Radii
+/- 0.2 +/- 0.5
+/- 1
30–120
+/- 0.3
+/- 1
Ordering Information
Contact Quantity:
04–80 Pins / 2 Row
9514XX
X XX XX 09
AR
XX
Packaging:
TP = Tube
PT = Tube with Pad
Mounting Style:
2 = Surface Mount,
without Loc. Posts, 2 Row
4 = Surface Mount,
with Loc. Posts, 2 Row
(8–16 Contacts / others on Request)
Plating:
AR = Selective Au 0.25 µm / Sn
Ref Appendix E1 & C1
Board Stacking Height (D):
Coding Number: see Table
Mating Pin Length
Dimension B:
01 = 4.0 mm
06 = 5.9 mm
Note: Pad options 8 to 80 pos.
TS-2159-B
Sheet 2 of 2
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of the 3M Company
For technical, sales or ordering information
call your Local 3M Service Center
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E3: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/717/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.product Warranty stated below.
RIA-2217A-D
Appendix E5: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under
Item 6 of the Annex to the Directive.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
CHINA
Appendix C1: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means
that the product or part
does not
contain any of the following substances in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix C2: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part
does
contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.
RIA-2217A-D
Appendix C3: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part
does
contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of 90 days from the time of purchase.
3M MAKES NO OTHER WARRANTIES INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
If this product is defective within the warranty
period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product.
Except where
prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the
I built a F103ZET6 board myself. It only has a download port in SWD mode, but no pull-up or pull-down. The chip can be identified using the CMSIS-DAP downloader, but the program cannot be downloaded. ...
[size=5]The ADC of 2812 has been completed, and the sequential sampling of 16-channel industrial frequency signals has been realized, with a basic accuracy of 0.5%. The summary is as follows: [/size] ...
The topic of the 2019 National College Student Electronic Technology Competition was released at 7:30 this morning on August 7.
Netizens who don’t know the title can look here:
Reference topics for th...
[i=s]This post was last edited by Gen_X on 2021-4-30 21:04[/i]Condition: Arteli development board AT32F421
MCU clock 120Mz, ADC clock 10Mz (maximum 28MHz, with plenty of margin).
Input: ADC1 first cha...
Where are you planning to go during the May Day holiday? Leave a message and share the beautiful scenery you see!Source: WeChat official account: City of Craftsmanship
I have seen so many mountains, r...
Can a potentiometer that can rotate multiple circles be used to detect the rotation of the steering wheel? What I am considering here is the wear and tear of the potentiometer caused by the speed of r...
Today, the whistleblower Onleaks released renderings of the Sony Xperia 1 III and exposed some key parameters. According to reports, the Sony Xperia 1 III uses a glass back panel and a r...[Details]
Recently, Tesla has pushed the fully autonomous driving (FSD) test version FSD Beta 10.6 to car owners in the United States. The performance has been greatly improved compared to the FSD Beta 10.5 ve...[Details]
The LED industry is divided into two models, depending on the capabilities of manufacturers: those that focus on high technology and high gross profit, those that focus on average technology and lo...[Details]
1 51 serial port structure
The UART serial communication of the 51 single-chip microcomputer is based on the programmable hardware structure of its serial port. As long as the correct program code is...[Details]
Recently, Baidu's self-driving taxis were opened to the public for free in Changsha, Hunan, and citizens can experience the driverless technology through mobile phone operation. Baidu's "ACE Traffic ...[Details]
Use innovative technology to help build more efficient and flexible power solutions Murata China (hereinafter referred to as "Murata"), the world's leading integrated electronic components manufa...[Details]
With the rapid development of 3G/4G mobile communication networks and computer technology, mobile Internet has improved people's traditional lifestyles in many ways. 3G/4G mobile networks have outs...[Details]
The significance of signal integrity Key to any good oscilloscope system is the ability to accurately reconstruct waveforms, a capability known as signal integrity. A Tektronix oscilloscope is like a...[Details]
I have written some C programs on operating systems before, but I didn't understand the significance of BSS segments and stacks. I didn't consider these issues when I wrote programs on microcontrolle...[Details]
On June 5, Microsoft updated its official support document on June 3, announcing that it would stop developing all NTLM versions including LANMAN, NTLMv1 and NTLMv2, and that it had completely aban...[Details]
The composition of mobile phone processors is somewhat similar to the olive-shaped social structure, with very few extremely rich or very poor people, and a very large middle class. This is also the ...[Details]
According to Jiwei.com, on April 23, Zou Wenjin, technical director of AR/VR products at Huawei Consumer BG, pointed out at a technical seminar held by VeriSilicon and Khronos that the AR engine is l...[Details]
There is an essential difference between the ARM series chips and the PC series (maybe my statement is not accurate) chips in instruction design. Each instruction in ARM is a reduced instructi...[Details]
Equipment defect management is one of the most important parts of the entire production and operation. Relevant departments need to carry out detailed management of the occurrence, characterization, ...[Details]
Recently, the 3-day 2024 China (Chongqing) Digital Energy Industry Innovation Conference Digital Energy Industry Exhibition was held in Chongqing. At the exhibition, Qingyuan Juneng (Chongqing) Techno...[Details]
stm32/stm8
京公网安备 11010802033920号
EEWORLD
