-
1. First of all, you must clearly understand the meaning of the project setting path. Why do you set this path instead of another one? What is the reason for setting it? Answer: The project setting p...[Details]
-
(I) Measuring resistance with a multimeter The ohmmeter of a multimeter can measure the resistance of a conductor. The ohmmeter is represented by "Ω" and is divided into four ranges: R×1, R×10, R×...[Details]
-
The light information of the object under test passes through the optical system and forms an optical image on the photosensitive element of the CCD. The CCD device converts the light information o...[Details]
-
Main program:
/******************************************************************************/
/* This file is part of the uVision/ARM development tools */
/* Copyright KE...[Details]
-
Undoubtedly, autonomous driving has become the future direction of automobile development that is unanimously recognized by technology and automobile companies around the world. In order to occupy ...[Details]
-
/******************************************************************* *Simulation receiving program, the function of this program is to receive data from the simulated serial port and then send this ...[Details]
-
STC15 standard procedure, you can refer to it if necessary. The microcontroller source program is as follows: //The function of this program is to receive data from serial port 1, serial port 2, ...[Details]
-
On June 10, according to SamMobile, Samsung Galaxy Fold 2 does not support S Pen. SamMobile claims the Samsung Galaxy Fold 2 will use ultra-thin flexible glass (UTG), which is not strong eno...[Details]
-
introduction
According to the function of the inductor in the circuit, there are two main applications, namely waveform generator and choke reactor. Among them, the application of waveform...[Details]
-
The external trigger of the function generator only supports two output modes: sweep and burst. The trigger source is divided into internal and external. Triggering can only be selected in sweep an...[Details]
-
1. Module output current limit test The module output current limit test is to test the maximum current that the module can output after the output current limit point is released (the PFC over...[Details]
-
Pointer-type and light-spot galvanometers have large external critical resistance and internal resistance, and have large losses in the circuit. Moreover, when the current in the energized coil chang...[Details]
-
On September 3, Zhonghuan Semiconductor Co., Ltd. announced that its holding subsidiary Zhonghuan Leading Semiconductor Materials Co., Ltd. (hereinafter referred to as "Zhonghuan Leading") is respons...[Details]
-
1 Analysis of the causes of transformer oil leakage Most of China's power transformers are oil-immersed transformers. Over the years, transformer oil leakage has occurred from time to time. Severe l...[Details]
-
● Electric vehicle startup standardizes on Siemens Teamcenter X and NX software to reduce IT investment while increasing accessibility for development teams and supply chain
Siemens Digi...[Details]
MicroPython Open Source section
京公网安备 11010802033920号
EEWORLD