Dual Port
Series
PROFESSIONAL QUALITY PRINTED BOARD MOUNT DUAL PORT
VERTICALLY STACKED CONNECTOR ASSEMBLY
FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
Size 20 Contacts,
Two Connectors Vertically
Stacked and Assembled
As a Single Connector Unit
Professional Quality
Connectors
IEC Publication 807-2
Performance Level Two
U.L. Recognized
CSA Recognized
File #E49351
File #LR54219
Telecommunication
U.L. File #14098
The Dual Port Series is a utilization of two connectors, vertically
stacked and assembled into a single connector unit, which permits sav-
ing of panel and printed board space. Final assembly costs are
reduced by condensing two assembly movements into one movement.
Dual Port Series connectors are professional quality connectors rec-
ommended for use in sheltered, non-corrosive indoor or outdoor envi-
ronments having normal ventilation, but without temperature or humid-
ity controls.
Connector contact variants are 9, 15, 25, 29, 37 and 50. Connector
genders may be mixed, i.e., one male and one female connector with-
in one Dual Port assembly. The two connectors may be spaced apart
to three standard dimensional spacings to accommodate various
dimensions of discrete hoods or molded hood assemblies. The con-
nector may also be partially populated with contacts which are installed
in the connector body to customer selected contact positions, thereby
reducing connector costs.
Dual Port Series connectors are offered with two printed board con-
tact hole patterns. One pattern is dimensional in inches and the other
pattern is dimensioned in millimeters. These patterns are commonly
known as Inch Footprints and Metric Footprints.
Mounting angle brackets can be ordered riveted to the connector by
specifying R2, R6, R7 or R8 options. These options provide for labor
saving ease of connector mounting to the printed board and also per-
mit rapid jackscrew installation.
Locking systems are available utilizing 4-40 threaded jackscrew sys-
tems, polarized or non-polarized, or with a quick release Vibration Lock
System for either front or rear panel mounted connectors.
Dual Port Series connectors comply with the dimensional and per-
formance requirements of IEC 807-2 Performance Level Two and
dimensional requirements of MIL-DTL-24308. Dual Port Series con-
nectors also meet the interface connection requirements for EIA RS
232 and RS 449, and the CCITT X.24 recommendations.
DUAL PORT SERIES TECHNICAL CHARACTERISTICS
MATERIALS AND FINISHES:
Insulator:
Contacts:
Nylon resin, UL 94V-0, black color.
Male contacts – precision machined
brass alloy. Female contacts – precision
machined high tensile phosphor bronze.
Gold flash over nickel plate. Other finishes
available upon request.
Steel or brass with tin plate; zinc plate
with dichromate seal. Other materials and
finishes available upon request.
Steel or brass with tin plate; zinc plate with
dichromate seal.
Nylon resin, UL 94V-0, black color.
Beryllium copper with tin plate.
Steel with zinc plate and dichromate
seal, or clear zinc plate.
Slide lock and lock tabs, steel with nickel
plate.
MECHANICAL CHARACTERISTICS:
Fixed Contacts:
Size 20 contacts, male contact – 0.040
inch [1.02 mm] diameter. Female contact
– rugged open entry design.
Contact Retention in Insulator:
6 lbs. [27 N].
Contact Terminations:
Printed board mount with 90° termina-
tions supported in footprint pattern by a
plastic cross bar. Termination diameter
0.028 inch [0.71 mm] and 0.024 [0.60
mm].
Shells:
Male shells may be dimpled for EMI/ESD
ground paths.
Trapezoidally shaped shells and polar-
ized jackscrews.
Riveted fasteners with 0.120 inch [3.05
mm] diameter clearance hole, 4-40
threads, or 4-40 threads with nylon lock
insert.
Rapid installation push-on fasteners.
Jackscrews and vibration locking sys-
tems for either front or rear panel mount-
ed connectors.
500 operations minimum per IEC 512-5.
-55°C to +125°C.
10 days.
Contact Plating:
Shells:
Mounting Spacers
and Brackets:
Cross Bar:
Push-On Fasteners:
Jackscrew Systems:
Vibration Lock Systems:
Polarization:
Mounting Bracket
Riveted to Connector:
Mounting to Printed Board:
Locking Systems:
ELECTRICAL CHARACTERISTICS:
Contact Current Rating:
5 amperes.
Initial Contact Resistance:
0.008 ohms maximum.
Proof Voltage:
Insulator Resistance:
Clearance and Creepage
Distance [minimum]:
Working Voltage:
1,000 V r.m.s.
5 G ohms.
0.039 inch [1.0 mm].
300 V r.m.s.
Mechanical Operations:
Temperature Range:
Damp Heat, Steady State:
CLIMATIC CHARACTERISTICS:
1
Positronic
Industries, Inc.
DP
MDP
Series
PROFESSIONAL QUALITY PRINTED BOARD MOUNT DUAL PORT
VERTICALLY STACKED CONNECTOR ASSEMBLY
FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
90° PRINTED BOARD MOUNT CONNECTOR
4 ROW CONNECTOR UNIT, 0.283 [7.19] CONTACT EXTENSION
±0.010
0.580
[14.73]
±0.008
B
CONNECTOR
NO. OF
VARIANT
CONTACTS
9
15
25
18
30
50
74
A
1.213
[30.81]
1.541
[39.14]
2.088
[53.04]
2.729
[69.32]
B
0.984
[24.99]
1.312
[33.32]
1.852
[47.04]
2.500
[63.50]
CONNECTOR
DESIGNATION
DPA
DPB
DPC
C
0.625
[15.88]
0.750
[19.05]
0.900
[22.86]
D
1.119
[28.42]
1.244
[31.60]
1.394
[35.41]
E
0.131
[3.33]
0.256
[6.50]
0.406
[10.31]
0.745
[18.92] ±0.010
0.270
[6.86]
Fixed female jackscrews
37
A
B
E
D
±0.010
C
±0.010
0.247
[6.27]
±0.030
0.140 [3.56]
0.028 Ø
[0.71] Typ.
Push-on fastener
beryllium copper
0.283 [7.19] Typ.
0.112 [2.84] Typ.
0.112 [2.84] Typ.
0.150 [3.81] Typ.
Typical Part Number: DPA25MN8T2/25MN8T2X
CONTACT HOLE PATTERN
Hole identification shown is for male connector, use mirror image for female connector.
Mount connector with mating face positioned to follow direction of arrow.
DP*9
Sym.
0.492
[12.50]
0.035
[0.89]
0.297
[7.54]
0.013
[0.33]
0.054
[1.37] Typ.
0.162 [4.11]
Sym.
0.656
[16.66]
0.035
[0.89]
0.378 [9.60]
0.054 Typ.
[1.37]
0.297
[7.54]
0.013
[0.33]
0.108 Typ.
[2.74]
0.013
[0.33]
0.055 Typ.
[1.40]
1.250 [31.75]
0.013
[0.33]
0.055 Typ.
[1.40]
0.216 [5.49]
0.108 Typ.
[2.74]
0.926
[23.52]
0.109 [2.77]
Typ.
DP*25
Sym.
0.652
[16.56]
0.035
[0.89]
0.297
[7.54]
Sym.
0.598
[15.19]
0.978
[24.84]
0.035
[0.89]
0.109 Typ.
[2.77]
0.297
[7.54]
0.324
[8.23]
0.924
[23.47]
DP*15
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
DP*37
Mounting holes must move 0.020 ±0.010 [0.51] opposite direction of arrow for use
of unriveted mounting bracket with connectors.
Suggest 0.045 ±0.002 [1.14] Ø hole for contact termination positions.
Suggest 0.123 ±0.003 [3.12] Ø hole for mounting connector with push-on fasteners.
3
Positronic
Industries, Inc.
DP
MDP
Series
PROFESSIONAL QUALITY PRINTED BOARD MOUNT DUAL PORT
VERTICALLY STACKED CONNECTOR ASSEMBLY
FOR SHELTERED INDOOR/OUTDOOR ENVIRONMENTAL APPLICATIONS
90° PRINTED BOARD MOUNT CONNECTOR
6 ROW CONNECTOR UNIT, 0.283 [7.19] CONTACT EXTENSION
±0.010
0.769
[19.53]
±0.008
B
CONNECTOR
NO. OF
VARIANT
CONTACTS
29
0.886
[22.50]
±0.010
0.395
[10.03]
CONNECTOR
DESIGNATION
Fixed female jackscrews
A
B
DPC
DPB
C
0.750
[19.05]
0.900
[22.86]
D
1.355
[34.42]
1.505
[38.23]
E
0.145
[3.68]
0.295
[7.49]
50
58
100
A
1.770
[44.96]
2.635
[66.93]
B
1.534
[38.96]
2.406
[61.11]
D
E
±0.010
C
±0.010
0.303
[7.70]
±0.030
0.140 [3.56]
0.028 Ø Typ.
[0.71]
0.283 [7.19] Typ.
Push-on fastener
beryllium copper
0.112 [2.84] Typ.
0.112 [2.84] Typ.
0.112 [2.84] Typ.
0.112 [2.84] Typ.
0.150 [3.81] Typ.
Typical Part Number: DPB29MN8T2/29MR8T2X
CONTACT HOLE PATTERN
Hole identification shown is for male connector, use mirror image for female connector.
Mount connector with mating face positioned to follow direction of arrow.
Sym.
0.767
[19.48]
0.112
Typ.
[2.84]
0.432
[10.97]
1.203
[30.56]
0.109 Typ.
[2.77]
Sym.
0.870
[22.10]
0.108
Typ.
[2.74]
0.112
Typ.
[2.84]
0.486
[12.34]
0.486
[12.34]
0.112
Typ.
[2.84]
0.112
Typ.
[2.84]
0.054
Typ.
[1.37]
0.486
[12.34]
0.055
Typ.
[1.40]
0.815
[20.70]
DP*29
DP*50
Suggest 0.045 ±0.002 [1.14] Ø hole for contact termination positions.
Suggest 0.123 ±0.003 [3.12] Ø hole for mounting connector with push-on fasteners.
Mounting holes must move 0.020 ±0.010 [0.51] opposite direction of arrow for use
of unriveted mounting bracket with connectors.
DIMENSIONS ARE IN INCHES [MILLIMETERS].
ALL DIMENSIONS ARE SUBJECT TO CHANGE.
Positronic
Industries, Inc.
4
DSP and ARM Processors
京公网安备 11010802033920号
EEWORLD
