P
Vishay Sfernice
High Precision Wraparound - Wide Ohmic Value Range
Thin Film Chip Resistors
FEATURES
•
Load life stability at ± 70 °C for 2000 h:
0.1 % under Pn/0.05 % under Pd
•
Low temperature coefficient down to
5 ppm/°C
(- 25 °C; + 85 °C)
•
Very low noise < 35 dB and
voltage coefficient
< 0.01 ppm/V
•
Wide resistance range: 10
Ω
to 50 MΩ depending on size
For low noise and precision applications, superior stability,
low temperature coefficient of resistance, and low voltage
coefficient, VISHAY SFERNICE’s proven precision
thin film wraparound resistors exceed requirements of
MIL-PRF-55342G characteristics Y ± 10 ppm/°C (- 55 °C;
+ 155 °C) down to ± 5 ppm/°C (- 25 °C; + 85 °C).
•
Tolerances to
±
0.01 %
•
In lot tracking
≤
5 ppm/°C
•
Termination: thin film technology
•
Gold plated or pre-tinned terminations over nickel barrier
•
Short circuits (jumpers) r < 50 mR, I < 2 A
Pb-free
Available
RoHS*
COMPLIANT
DIMENSIONS
in millimeters [inches]
A
D
D
C
B
E
E
DIMENSION
A
CASE
SIZE
MAX. TOL.
+ 0.152 [+ 0.006]
MIN. TOL.
- 0.152 [- 0.006]
1.00 [0.040]
1.35 [0.053]
1.52 [0.060]
1.91 [0.075]
2.54 [0.100]
3.06 [0.120]
3.81 [0.150]
5.08 [0.200]
B
MAX. TOL.
+ 0.127 [+ 0.005]
MIN. TOL.
- 0.127 [- 0.005]
0.60 [0.023]
1.27 [0.050]
0.75 [0.030]
1.27 [0.050]
1.27 [0.050]
1.60 [0.063]
1.32 [0.054]
2.54 [0.100]
C
MAX. TOL.
+ 0.127 [+ 0.005]
MIN. TOL.
- 0.127 [- 0.005]
0.5 [0.02]
0.5 [0.02]
0.5 [0.02]
0.5 [0.02]
0.5 [0.02]
0.5 [0.02]
0.5 [0.02]
0.5 [0.02]
D/E
MAX. TOL.
+ 0.13 [+ 0.005]
MIN. TOL.
- 0.13 [- 0.005]
0.38 [0.015]
0.38 [0.015]
0.38 [0.015]
0.38 [0.015]
0.38 [0.015]
0.38 [0.015]
0.38 [0.015]
0.38 [0.015]
POWER RATING
mW
LIMITING
ELEMENT
VOLTAGE
V
RESISTANCE
RANGE
(2)
Pn
(1)
63
125
125
200
250
330
350
1000
Pd
(1)
40
50
100
125
125
250
175
500
50
50
75
150
75
200
75
300
10
Ω
- 1 MΩ
10
Ω
- 2.5 MΩ
10
Ω
- 2.5 MΩ
10
Ω
- 5 MΩ
10
Ω
- 5 MΩ
10
Ω
- 15 MΩ
10
Ω
- 10 MΩ
10
Ω
- 50 MΩ
0402
0505
0603
0705/0805
1005
1206
1505
2010
Note:
(1)
(2)
P
n
= nominal power - Pd = derated power intended to improve stability
For ohmic range versus tolerance and TCR see detailed table page 2
* Pb containing terminations are not RoHS compliant, exemptions may apply
www.vishay.com
60
For technical questions, contact: sfer@vishay.com
Document Number: 53017
Revision: 24-Jun-08
P
High Precision Wraparound - Wide Ohmic Value Range
Vishay Sfernice
Thin Film Chip Resistors
ELECTRICAL SPECIFICATIONS
Resistance range:
Resistance tolerance:
Power dissipation:
10
Ω
to 50 MΩ
± 0.1 % to ± 1 %
± 0.01 % to ± 0.05 % on Y type
Pn:
63 mW to 1 W
Pd:
40 mW to 500 mW
on tolerance tighter than ± 0.05 %
TOLERANCE AND TCR VERSUS OHMIC
VALUE
SIZE
VALUE
RANGE
10R - 1M
10R - 150K
39R - 150K
39R - 100K
100R - 100K
250R - 100K
10R - 2M5
10R - 300K
39R - 300K
39R - 260K
100R - 260K
250R - 260K
10R - 2M5
10R - 500K
39R - 500K
39R - 332K
100R - 332K
250R - 332K
10R - 5M
10R - 750K
39R - 750K
39R - 511K
100R - 511K
250R - 511K
10R - 5M
10R - 750K
39R - 750K
39R - 500K
100R - 500K
250R - 500K
10R - 15M
10R - 2M
39R - 2M
39R - 1M5
100R - 1M5
250R - 1M5
10R - 10M
10R - 1M
39R - 1M
39R - 750K
100R - 750K
250R - 750K
10R - 50M
10R - 6M
39R - 6M
39R - 3M
100R - 3M
250R - 3M
TIGHTEST
TOLERANCE
%
0.1
0.1
0.05
0.05
0.02
0.01
0.1
0.1
0.05
0.05
0.02
0.01
0.1
0.1
0.05
0.05
0.02
0.01
0.1
0.1
0.05
0.05
0.02
0.01
0.1
0.1
0.05
0.05
0.02
0.01
0.1
0.1
0.05
0.05
0.02
0.01
0.1
0.1
0.05
0.05
0.02
0.01
0.1
0.1
0.05
0.05
0.02
0.01
BEST TCR
(ppm/°C)
50
25
25
10 (5)
(3)
10 (5)
(3)
10 (5)
(3)
50
25
25
10 (5)
(3)
10 (5)
(3)
10 (5)
(3)
50
25
25
10 (5)
(3)
10 (5)
(3)
10 (5)
(3)
50
25
25
10 (5)
(3)
10 (5)
(3)
10 (5)
(3)
50
25
25
10 (5)
(3)
10 (5)
(3)
10 (5)
(3)
50
25
25
10 (5)
(3)
10 (5)
(3)
10 (5)
(3)
50
25
25
10 (5)
(3)
10 (5)
(3)
10 (5)
(3)
50
25
25
10 (5)
(3)
10 (5)
(3)
10 (5)
(3)
Temperature coefficient:
see table below
P0402
CLIMATIC SPECIFICATIONS
Operating temp. range:
- 55 °C to + 155 °C
P0505
For temperature up to 200 °C, please consult factory
MECHANICAL SPECIFICATIONS
Substrate:
Technology:
Film:
Protection:
Terminations:
Alumina
Thin film
Nickel chromium
with mineral
passivation or
CrSi
Silicone
B type:
SnPb over nickel barrier
for solder reflow
N type:
SnAg over nickel barrier
G type:
gold over nickel barrier
for other applications
P0603
P0705/0805
TEMPERATURE COEFFICIENT
TCR
± 5 ppm/°C
(1)
(2)
CODE
Z
Y
E
H
K
FILM
NiCr
NiCr
NiCr
NiCr or CrSi
NiCr or CrSi
P1206
P1005
± 10 ppm/°C
± 25 ppm/°C
± 50 ppm/°C
± 100 ppm/°C
Notes:
(1)
Reduced operating range: 0 °C; + 70 °C option available for
(- 25 °C; + 85 °C)
R > 50
Ω
on request for lower values
(2)
POWER DERATING CURVE
Rated Power (%)
P1505
100
80
60
40
20
0
P2010
0
20
40
60 70
80
100
120
140 155
Ambient Temperature in °C
Document Number: 53017
Revision: 24-Jun-08
Note:
(3)
5 ppm/°C in a reduced operating range (0 °C; + 70 °C). Option
available for operating range (- 25 °C; + 85 °C) upon request with
price adder
www.vishay.com
61
For technical questions, contact: sfer@vishay.com
P
Vishay Sfernice
High Precision Wraparound - Wide Ohmic Value Range
Thin Film Chip Resistors
PACKAGING
Several types of packaging are available: waffle-pack, and
tape and reel.
NUMBER OF PIECES PER PACKAGE
SIZE MOQ
WAFFLE PACK
2" × 2"
TAPE AND REEL
MIN.
MAX.
TAPE
WIDTH
PACKAGING RULES
Waffle Pack
Can be filled up to maximum quantity indicated in the table
here above, taking into account the minimum order quantity.
When quantity ordered exceeds maximum quantity of a
single waffle pack, the waffle packs are stacked up on the top
of each other and closed by one single cover.
To get “not stacked up” waffle pack in case of ordered
quantity > maximum number of pieces per package:
Please consult Vishay/Sfernice for specific ordering
code
Tape and Reel
Can be filled up to maximum quantity indicated in the table
here above, taking into account the minimum order quantity.
When quantity ordered is between the MOQ and the
maximum reel capacity, only one reel is provided.
When several reels are needed for ordered quantity
within MOQ and maximum reel capacity: Please consult
Vishay/Sfernice for specific ordering code
0402
0505
0603
0805
0705
1005
1206
1505
60
2010
Note:
(1)
12 mm on request
100
2000
8 mm
(1)
100
100
100
221
140
4000
8 mm
PERFORMANCE
Ta
2
N
TESTS
CONDITIONS
MIL-PRF-55342G
requirements
± 0.25 %
DRIFTS
Typical
performances
± 0.02 %
NiCr
Typical
performances
± 0.02 %
MIL-PRF-55342G
Thermal Shock
MIL-PRF-55342G
MIL-STD-202 F-Method 107 F
MIL-PRF-55342G
PARA 3.10.4.7.5
MIL-PRF-55342G
PARA 3.9 and 4.7.4
MIL-PRF-55342G
PARA 3.12, 4.7.7, 4.7.1.2
MIL-PRF-55342G
PARA 3.13 and 4.7.8
MIL-STD-202 F-Method 106 E
MIL-PRF-55342G
PARA 3.11 and 4.7.6
MIL-PRF-55342G
2000 h Pn at 70 °C
MIL-STD-202 F-Method 108 A
± 0.05 %
Short Time Overload
± 0.10 %
± 0.01 %
± 0.05 %
± 0.01 %
Low Temperature Operation
± 0.25 %
± 0.01 %
± 0.05 %
± 0.01 %
Resistance to Solder Heat
± 0.25 %
± 0.04 %
± 0.05 %
± 0.03 %
Moisture Resistance
± 0.40 %
± 0.01 %
± 0.10 %
± 0.01 %
High Temperature
± 0.20 %
± 0.075 %
± 0.05 %
± 0.05 %
Load Life
Note:
(2)
± 0.50 %
± 0.15 %
± 0.5 %
± 0.10 %
(2)
0.05 % under Pd
www.vishay.com
62
For technical questions, contact: sfer@vishay.com
Document Number: 53017
Revision: 24-Jun-08
P
High Precision Wraparound - Wide Ohmic Value Range
Vishay Sfernice
Thin Film Chip Resistors
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: P0505Y1003BBT0933
P
GLOBAL
MODEL
P
0
5
SIZE
0402
0505
0603
0705
0805
1005
1206
1505
2010
0
5
Y
TCR
1
0
VALUE
0
3
B
B
T
0
9
3
3
OPTION
Leave
blank if no
option
TOLERANCE
L
= ± 0.01 %
P
= ± 0.02 %
W
= ± 0.05 %
B
= ± 0.1 %
C
= ± 0.25 %
D
= ± 0.5 %
F
=±1%
G
=±2%
J
=±5%
S
= Special
X
= Jumper
TERMINATION PACKAGING
B:
SnPb over
nickel barrier
N:
SnAg over
nickel barrier
G:
Gold over
nickel barrier
blank
=
Waffle Pack
T
= Tape
(1)
K
= ± 100
ppm/°C
H
= ± 50 ppm/°C
E
= ± 25 ppm/°C
Y
= ± 10 ppm/°C
X
= Jumper
Z
= ± 5 ppm
(0.70 °C)
The first three digits (2
digits are enough for
tolerance G and J) are
significant figures and
the last digit specifies
the number of zeros to
follow, R designates
decimal point
10R0 = 10
Ω
3901 = 3900
Ω
1004 = 1 MΩ
0R00 = Jumper
B:
Lead bearing version
N and G:
Lead (Pb)-free/
RoHS version
Historical Part Number example: P 0505 Y 1003 B B TR R0933 e2
P
HISTORICAL
MODEL
P
0505
SIZE
0402
0505
0603
0705
0805
1005
1206
1505
2010
Y
TCR
K
= ± 100
ppm/°C
H
= ± 50 ppm/°C
E
= ± 25 ppm/°C
Y
= ± 10 ppm/°C
X
= Jumper
Z
= ± 5 ppm
(0.70 °C)
1003
VALUE
The first three digits (2
digits are enough for
tolerance G and J) are
significant figures and
the last digit specifies
the number of zeros to
follow, R designates
decimal point
10R0 = 10
Ω
3901 = 3900
Ω
1004 = 1 MΩ
0R00 = Jumper
B
TOLERANCE
L
= ± 0.01 %
P
= ± 0.02 %
W
= ± 0.05 %
B
= ± 0.1 %
C
= ± 0.25 %
D
= ± 0.5 %
F
=±1%
G
=±2%
J
=±5%
S
= Special
X
= Jumper
B
TR
R0933
OPTION
e2
RoHS
e2:
tin/silver
e4:
gold
blank:
SnPb
TERMINATION PACKAGING
B:
SnPb over
nickel barrier
N:
SnAg over
nickel barrier
G:
Gold over
nickel barrier
blank
=
Leave blank
Waffle Pack if no option
TR
= Tape
(1)
B:
Lead bearing version
N and G:
Lead (Pb)-free/
RoHS version
Note:
• Chips ready to be trimmed available. (P
trim
) - Please consult Sfernice.
(1)
For specific quantity of parts per packaging please consult Sfernice
Document Number: 53017
Revision: 24-Jun-08
For technical questions, contact: sfer@vishay.com
www.vishay.com
63
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
京公网安备 11010802033920号
EEWORLD
