Apply LOGO! ventilation system control circuit a
Source: InternetPublisher:红水杯 Keywords: control circuit system control motor Updated: 2020/09/27
The traditional relay ventilation system control circuit is shown in the figure. Contactor KM controls the exhaust gas exhaust motor ;
KMz controls the fresh air supply motor . In the figure, sl is the flow monitor pressure control contact at the exhaust gas exhaust device
, and S2 is the flow monitor pressure control contact at the fresh air supply device. When the air pressure is less than the specified value, the contact is closed;
KTi and KTz are the time Relay; KA is the fault alarm intermediate relay; SBi is the start button; SB2 is the stop button
; Hi is the fresh air supply indicator light; H2 is the fault alarm signal light.
- A simple magnetic switch circuit sharing
- Design and selection of electric control valve system drive
- How to Make a Simple 2-Step Arduino Programmable Timer Circuit
- A small improvement on the ordinary refrigerator motor starting circuit
- Working principle of one Xipu STR soft starter controlling two motors
- Light-controlled circuit design and analysis
- Design and manufacture of three-phase motor protection circuit
- Motorcycle anti-theft device circuit design
- A novel and practical power line anti-theft and cutting alarm circuit
- "Watchdog" anti-theft alarm circuit
- Water and electricity saving infrared control circuit
- Microwave oven control circuit
- Table printing machine control circuit
- Chandelier control circuit
- Microwave heating component control circuit schematic diagram
- Steam iron temperature detection control circuit
- Temperature detection control circuit of electric kettle
- Temperature detection control circuit for vegetable greenhouses
- Inverter brightness control circuit
- Wide input range non-synchronous voltage mode control circuit