Z: Tape and reel packing (Picked from the 8/9/10/12-pin side)
Note: In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay.
Several part numbers will be discontinued September 30, 2013.
TYPES
1. Standard (B.B.M.) type/Surge breakdown voltage (between contact and coil) 2,500 V/ Breakdown voltage (between open
contacts) 1,000 V
1) Standard PC board terminal
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
4.5V DC
2 Form C
5V DC
6V DC
9V DC
12V DC
24V DC
Single side stable
Part No.
TXD2-1.5V
TXD2-3V
TXD2-4.5V
TXD2-5V
TXD2-6V
TXD2-9V
TXD2-12V
TXD2-24V
1 coil latching
Part No.
TXD2-L-1.5V
TXD2-L-3V
TXD2-L-4.5V
TXD2-L-5V
TXD2-L-6V
TXD2-L-9V
TXD2-L-12V
TXD2-L-24V
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
Note: Please add “-1” to the end of the part number for AgPd contacts (low level load).
2) Surface-mount terminal
(1) Tube packing
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
4.5V DC
2 Form C
5V DC
6V DC
9V DC
12V DC
24V DC
Single side stable
Part No.
TXD2S-1.5V
TXD2S-3V
TXD2S-4.5V
TXD2S-5V
TXD2S-6V
TXD2S-9V
TXD2S-12V
TXD2S-24V
1 coil latching
Part No.
TXD2S-L-1.5V
TXD2S-L-3V
TXD2S-L-4.5V
TXD2S-L-5V
TXD2S-L-6V
TXD2S-L-9V
TXD2S-L-12V
TXD2S-L-24V
:
For each surface-mount terminal identification, input the following letter. SA type: A, SS type: S
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
Note: Please add “-1” to the end of the part number for AgPd contacts (low level load).
2
ds_61022_en_txd: 150113D
Several part numbers will be discontinued September 30, 2013.
(2) Tape and reel packing
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
4.5V DC
2 Form C
5V DC
6V DC
9V DC
12V DC
24V DC
Single side stable
Part No.
TXD2S-1.5V-Z
TXD2S-3V-Z
TXD2S-4.5V-Z
TXD2S-5V-Z
TXD2S-6V-Z
TXD2S-9V-Z
TXD2S-12V-Z
TXD2S-24V-Z
1 coil latching
Part No.
TXD2S-L-1.5V-Z
TXD2S-L-3V-Z
TXD2S-L-4.5V-Z
TXD2S-L-5V-Z
TXD2S-L-6V-Z
TXD2S-L-9V-Z
TXD2S-L-12V-Z
TXD2S-L-24V-Z
TX-D
:
For each surface-mount terminal identification, input the following letter. SA type: A, SS type: S
Standard packing: Tape and reel: 500 pcs.; Case: 1,000 pcs.
Notes: 1. Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/3/4/5-pin side) is also available.
2. Please add “-1” to the part number for AgPd contacts (low level load). (Ex. TXD2SA-1.5V-1-Z)
2. M.B.B type/Surge breakdown voltage (between contact and coil) 2,500 V/
Breakdown voltage (between open contacts) 1,000 V
1) Standard PC board terminal
Contact arrangement
Nominal coil voltage
1.5V DC
3V DC
4.5V DC
2 Form C
5V DC
6V DC
9V DC
12V DC
24V DC
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
Single side stable
Part No.
TXD2-2M-1.5V
TXD2-2M-3V
TXD2-2M-4.5V
TXD2-2M-5V
TXD2-2M-6V
TXD2-2M-9V
TXD2-2M-12V
TXD2-2M-24V
2) Surface-mount terminal
(1) Tube packing
Contact arrangement
Nominal coil voltage
1.5V DC
3V DC
4.5V DC
2 Form C
5V DC
6V DC
9V DC
12V DC
24V DC
:
For each surface-mount terminal identification, input the following letter. SA type: A, SS type: S
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
Single side stable
Part No.
TXD2S-2M-1.5V
TXD2S-2M-3V
TXD2S-2M-4.5V
TXD2S-2M-5V
TXD2S-2M-6V
TXD2S-2M-9V
TXD2S-2M-12V
TXD2S-2M-24V
(2) Tape and reel packing
Contact arrangement
Nominal coil voltage
1.5V DC
3V DC
4.5V DC
2 Form C
5V DC
6V DC
9V DC
12V DC
24V DC
Single side stable
Part No.
TXD2S-2M-1.5V-Z
TXD2S-2M-3V-Z
TXD2S-2M-4.5V-Z
TXD2S-2M-5V-Z
TXD2S-2M-6V-Z
TXD2S-2M-9V-Z
TXD2S-2M-12V-Z
TXD2S-2M-24V-Z
:
For each surface-mount terminal identification, input the following letter. SA type: A, SS type: S
Standard packing: Tape and reel: 500 pcs.; Case: 1,000 pcs.
Notes: 1. Types designed to withstand strong vibration caused, for example, by the use of terminal cutters, can also be ordered.
However, please contact us if you need parts for use in low level load. (Ex. TXD2SA-2M-1.5V-1-Z)
2. Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/3/4/5-pin side) is also available.
ds_61022_en_txd: 150113D
3
TX-D
Several part numbers will be discontinued September 30, 2013.
3. Standard (B.B.M.) type/Surge breakdown voltage (between contact and coil) 6,000 V/
Breakdown voltage (between open contacts) 1,000 V
1) Standard PC board terminal
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
4.5V DC
2 Form C
5V DC
6V DC
9V DC
12V DC
24V DC
Single side stable
Part No.
TXD2-1.5V-6
TXD2-3V-6
TXD2-4.5V-6
TXD2-5V-6
TXD2-6V-6
TXD2-9V-6
TXD2-12V-6
TXD2-24V-6
1 coil latching
Part No.
TXD2-L-1.5V-6
TXD2-L-3V-6
TXD2-L-4.5V-6
TXD2-L-5V-6
TXD2-L-6V-6
TXD2-L-9V-6
TXD2-L-12V-6
TXD2-L-24V-6
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
Note: Please add “-7” to the end of the part number for AgPd contacts (low level load).
2) Surface-mount terminal
(1) Tube packing
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
4.5V DC
2 Form C
5V DC
6V DC
9V DC
12V DC
24V DC
Single side stable
Part No.
TXD2S-1.5V-6
TXD2S-3V-6
TXD2S-4.5V-6
TXD2S-5V-6
TXD2S-6V-6
TXD2S-9V-6
TXD2S-12V-6
TXD2S-24V-6
1 coil latching
Part No.
TXD2S-L-1.5V-6
TXD2S-L-3V-6
TXD2S-L-4.5V-6
TXD2S-L-5V-6
TXD2S-L-6V-6
TXD2S-L-9V-6
TXD2S-L-12V-6
TXD2S-L-24V-6
:
For each surface-mount terminal identification, input the following letter. SA type: A, SS type: S
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
Note: Please add “-7” to the end of the part number for AgPd contacts (low level load).
(2) Tape and reel packing
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
4.5V DC
2 Form C
5V DC
6V DC
9V DC
12V DC
24V DC
Single side stable
Part No.
TXD2S-1.5V-6-Z
TXD2S-3V-6-Z
TXD2S-4.5V-6-Z
TXD2S-5V-6-Z
TXD2S-6V-6-Z
TXD2S-9V-6-Z
TXD2S-12V-6-Z
TXD2S-24V-6-Z
1 coil latching
Part No.
TXD2S-L-1.5V-6-Z
TXD2S-L-3V-6-Z
TXD2S-L-4.5V-6-Z
TXD2S-L-5V-6-Z
TXD2S-L-6V-6-Z
TXD2S-L-9V-6-Z
TXD2S-L-12V-6-Z
TXD2S-L-24V-6-Z
:
For each surface-mount terminal identification, input the following letter. SA type: A, SS type: S
Standard packing: Tape and reel: 500 pcs.; Case: 1,000 pcs.
Notes: 1. Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/3/4/5-pin side) is also available.
2. Please add “-7” to the part number for AgPd contacts (low level load). (Ex. TXD2SA-1.5V-7-Z)
4
ds_61022_en_txd: 150113D
Several part numbers will be discontinued September 30, 2013.
4.
Standard (B.B.M.) type/Surge breakdown voltage (between contact and coil) 6,000 V/
Breakdown voltage (between open contacts) 1,500 V (High breakdown voltage type)
1) Standard PC board terminal
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
4.5V DC
2 Form C
5V DC
6V DC
9V DC
12V DC
24V DC
Single side stable
Part No.
TXD2-1.5V-3
TXD2-3V-3
TXD2-4.5V-3
TXD2-5V-3
TXD2-6V-3
TXD2-9V-3
TXD2-12V-3
TXD2-24V-3
1 coil latching
Part No.
TXD2-L-1.5V-3
TXD2-L-3V-3
TXD2-L-4.5V-3
TXD2-L-5V-3
TXD2-L-6V-3
TXD2-L-9V-3
TXD2-L-12V-3
TXD2-L-24V-3
TX-D
Standard packing: Tube: 40 pcs.; Case: 800 pcs.
Note: Please add “-4” to the end of the part number for AgPd contacts (low level load).
2) Surface-mount terminal
(1) Tube packing
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
4.5V DC
2 Form C
5V DC
6V DC
9V DC
12V DC
24V DC
Single side stable
Part No.
TXD2S-1.5V-3
TXD2S-3V-3
TXD2S-4.5V-3
TXD2S-5V-3
TXD2S-6V-3
TXD2S-9V-3
TXD2S-12V-3
TXD2S-24V-3
1 coil latching
Part No.
TXD2S-L-1.5V-3
TXD2S-L-3V-3
TXD2S-L-4.5V-3
TXD2S-L-5V-3
TXD2S-L-6V-3
TXD2S-L-9V-3
TXD2S-L-12V-3
TXD2S-L-24V-3
:
For each surface-mount terminal identification, input the following letter. SA type: A, SS type: S
Standard packing: Tube: 40 pcs.; Case: 800 pcs.
Note: Please add “-4” to the end of the part number for AgPd contacts (low level load).
(2) Tape and reel packing
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
4.5V DC
2 Form C
5V DC
6V DC
9V DC
12V DC
24V DC
Single side stable
Part No.
TXD2SA-1.5V-3-Z
TXD2SA-3V-3-Z
TXD2SA-4.5V-3-Z
TXD2SA-5V-3-Z
TXD2SA-6V-3-Z
TXD2SA-9V-3-Z
TXD2SA-12V-3-Z
TXD2SA-24V-3-Z
1 coil latching
Part No.
TXD2SA-L-1.5V-3-Z
TXD2SA-L-3V-3-Z
TXD2SA-L-4.5V-3-Z
TXD2SA-L-5V-3-Z
TXD2SA-L-6V-3-Z
TXD2SA-L-9V-3-Z
TXD2SA-L-12V-3-Z
TXD2SA-L-24V-3-Z
*Only for SA type.
Standard packing: Tape and reel: 500 pcs.; Case: 1,000 pcs.
Notes: 1. Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/3/4/5-pin side) is also available.
2. Please add “-4” to the part number for AgPd contacts (low level load). (Ex. TXD2SA-1.5V-4-Z)
On-time Atom LWIP video tutorial : https://training.eeworld.com.cn/course/4910This course uses the Zhengdian Atom development board as a platform, and introduces in detail how to use each function of ...
[i=s]This post was last edited by qwqwqw2088 on 2021-10-29 12:57[/i]Once a device breaks down, don't stay away from it, but treat it as a treasure.Everyone who drives knows where is the best place to ...
In the eyes of some people, the work of PCB layout engineers is a bit boring. Every day, they have to deal with thousands of wiring on the board, various packages, and repeat the work of pulling wires...