Indicates performance and reliability requirements. "B" level represents standard reliability."T" level represents high reliability.
Please refer to performance specification sheet MIL-PRF-49470 for details regarding test levels. The latest revision of the specification sheet is available through DSCC.
1, 3
Test level option "T" is not available on encapsulated stacked devices (i.e. MIL-PRF-49470/2).
2
Dielectric classification and characteristic details are outlined in the "Electrical Parameters" section of this document.
4
Lead configuration and dimension details are outlined in the "Dimensions" section of this document.
1
1
KPS MIL Series, SMPS Stacks Ordering Information
(Do not use this ordering code if a QPL MIL-SPEC part type is required. Please order using MIL-SPEC ordering code. Details
regarding MIL-PRF-49470 QPL ordering information is outlined above.)
L1
1
R
N
30
C
106
K
S
Testing Option
4
12
Maximum Height
Dimension (in.)
5
Dielectric
Lead
Product Family Classification/
Configuration
3
Characteristic
2
L1 =
Unencapsulated
L2 =
Encapsulated
Q = BQ
R = BR
X = BX
W = X7R
N = Straight
L = Formed "L"
M= Formed "L"
J= Formed "J"
K= Formed "J"
Case Size /
Rated
Capacitance Capacitance
Case Code
Voltage (DC) Code (pF)
Tolerance
(CC)
30 = CC 3
40 = CC 4
50 = CC 5
3 = 25V 2 Sig. Digits J = ±5%
5 = 50V + Number of K = ±10%
1 = 100V
Zeros
M = ±20%
2 = 200V
C = 500V
B = 630V
D = 1000V
B = M49470 "B" Level Unencapsulated Encapsulated
T = M49470 "T" Level
12 = 0.12"
27 = 0.27"
C = DSCC87106
24 = 0.24"
39 = 0.39"
S = Commercial
36 = 0.36"
53 = 0.53"
X = Non-Standard
48 = 0.48"
66 = 0.66"
(Customer Specific
65 = 0.65"
80 = 0.80"
Requirements)
,
Test level option "T" is not available on encapsulated stacked devices, i.e., MIL-PRF-49470/2. If a QPL MIL-Spec part type is required, please order using the
MIL-Spec ordering code.
2
Dielectric classification and characteristic details are outlined in the ""Electrical Parameters"" section of this document.
3
Lead configuration and dimension details are outlined in the "Dimensions" section of this document. Additional lead configurations may be available. Contact
KEMET for details.
4
Indicates performance and reliability requirements. Testing option details are outlined in the "Performance and Reliability" section of this document.
4
Please refer to performance specification sheet MIL-PRF-49470 for additional details regarding test levels. The latest revision of the specification sheet is
available through DSCC.
4
DSCC Drawing 87106 was cancelled on 01/03/2005. MIL-PRF-49470 capacitors are preferred over DSCC Drawing 87106 capacitors.
5
Maximum height dimensions are provided in product tables 1A, 1B, and 1C of this document
1
4
Ordering Information Requirements per DSCC Drawing 87106
DSCC Drawing 87106 was cancelled on 01/03/2005. Customers can continue to order per 87106 requirements using the original DSCC ordering code,i.e., 87106-001.
When available, MIL-PRF-49470 devices are preferred over DSCC Drawing 87106. The MIL-PRF-49470 military specification product provides additional quality
assurance provisions that are not required by the DSCC drawing. These extra provisions create a more robust replacement.
1. Unless otherwise specified, tolerances are ±.010" (0.25mm).
2. Metric equivalents for C, D and E dimensions are provided for general information only.
3. For maximum B dimension, add .065" (1.65mm) to the appropriate A dimension. For all lead styles, the number of chips is determined by the capacitance and
voltage rating.
4. For case code 5, dimensions shall be .100" (2.54mm) maximum and .012” (0.30mm) minimum.
5. Lead alignment within pin rows shall be within ±.005" (0.13mm).
Unencapsulated & Encapsulated Lead Configurations – Inches (Millimeters)
Lead Style
Symbol
N
L
M
J
K
(J) Formed
Lead Style
(N) Straight
(L) Formed
L
Lead Length
0.250 Min. (6.35)
0.070 ± 0.010 (1.78 ± 0.25)
0.045 ± 0.010 (1.14 ± 0.25)
0.070 ± 0.010 (1.78 ± 0.25)
0.045 ± 0.010 (1.14 ± 0.25)
Additional lead configurations may be available. Contact KEMET for details.
The main formulas of LLC are derived one by one to deepen the understanding of LLC. In this way, zero voltage and equivalent resistance are clearer....
Activity Overview: Click here to view (including activity encouragement and activity learning content)Check-in start and end time for this site: August 21st - August 23rd (3 days)
Check-in tasks :
1. ...
Many customers have reported that electromagnetic wave interference in radio communications cannot be seen, touched, or presented. Sometimes, they encounter the following problem: for the same set of ...
We are looking for PCB engineers and electrical engineers. The work location is Shangyu, Shaoxing, Zhejiang. As long as it is suitable, everything can be discussed. Contact WeChat 18157523951...
[i=s]This post was last edited by Hot Ximixiu on 2021-11-15 20:46[/i]I have several boards for STM32F103RET6 applications, and I am asked by purchasers all day whether they can be replaced by domestic...
Today (3), the KT Lee Science and Technology Development Foundation and the Semiconductor Industry Association of Taiwan jointly held the KT Lee Memorial Forum, and Macronix Chairman Wu Min-chiu was ...[Details]
CMOS
charge pump phase-locked loop has been widely used in receiver chips and clock recovery circuits due to its high speed, low jitter, low power consumption and easy integration. As shown i...[Details]
Since ARM Keil was upgraded to Keil5 series, Keil tools have greatly simplified the porting of operating systems and various library files. You can complete the transplantation work by just moving yo...[Details]
2020 is a year worth remembering for United Electronics. The 100 millionth Engine Control Unit (ECU) produced by the company officially rolled off the production line, breaking the record again. Rega...[Details]
First of all, although I am a beginner in STM32, I strongly oppose a misleading view: "For MCUs of the level of STM32, there is no need to look at how registers are operated if there are library func...[Details]
Recently, in order to further strengthen the management of the lithium-ion battery industry and promote the transformation and upgrading of the industry and technological progress, the Ministry of In...[Details]
The hardware part of this design is mainly composed of signal amplification, AC/DC conversion, AD conversion, range conversion, microcontroller for data acquisition and data transmission, interface c...[Details]
Open Kernel Labs (OK Labs) has released a software and service solution based on the company's OKL4 Microvisor platform: Secure IT Mobile. The solution can help mobile OEMs, mobile network operators (...[Details]
SOT23 MAX917 - MAX920 Power
Comparators
and guaranteed operation from V to +1.8 The MAX917/MAX918 feature an onboard 1.245V ±1.5% reference and draw an ultra-low supply current of only 750n...[Details]
Faster, smaller, and cooler. Nanotechnology researchers often like to describe their new technologies as "more", but Professor Fritz Prinz from the Nano Prototyping Laboratory at Stanford Universi...[Details]
According to Cankao Xiaoxi, foreign media said that Malaysia is preparing to launch a 5G project next month and launch the country's first 5G network next year, and China's Huawei will participate in...[Details]
Recently, the Shanghai Municipal Economic and Information Commission issued the "Shanghai Action Plan to Promote High-Quality Innovation and Development of New Energy Storage Industry (2023-2025) (...[Details]
On June 16, 2017, TUV Rheinland (hereinafter referred to as "TUV Rheinland") issued China's first charging cable certification certificate that complies with the GB/T33594-2017 standard for the ele...[Details]
The 2024 All Energy Australia Australian International Energy Exhibition opened grandly today at the Melbourne Convention and Exhibition Center.
Sofar New Energy made a shining appearance at bo...[Details]
Analogue and Mixed Signal
京公网安备 11010802033920号
EEWORLD
