85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Potentiometer Specifications
Initial Electrical Characteristics
1
Conductive Plastic Element
Cermet Element
Standard Resistance Range
Linear Tapers (A, B, E, & H) ..................................................................(B & E) 1 K ohms to 1 megohm ............. (A & H) 100 ohms to 1 megohm
Audio Tapers (C, D, F, G, S, & T) .........................................................(D, G, S, & T) 1 K ohms to 1 megohm ... (C & F) 1 K ohms to 1 megohm
Total Resistance Tolerance .........................................................................±20 % or 10 % ...................................... ±10 % or 5 %
Absolute Minimum Resistance ...................................................................2 ohms maximum .................................. 2 ohms maximum
Operating Temperature Range ...................................................................-40 °C to +125 °C.................................. -40 °C to +125 °C
Storage Temperature Range ......................................................................-55 °C to +125 °C.................................. -55 °C to +125 °C
Temperature Coefficient Over Storage Temperature Range ......................±1,000 ppm/°C ...................................... ±150 ppm/°C
Vibration (Single Section) ...........................................................................15 G ....................................................... 15 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Shock (Single Section) ...............................................................................30 G ....................................................... 30 G
Total Resistance Shift ...........................................................................±2 % maximum ..................................... ±2 % maximum
Voltage Ratio Shift ................................................................................±5 % maximum ..................................... ±5 % maximum
Total Resistance Shift ...........................................................................±10 % maximum ................................... ±5 % maximum
Rotational Life (No Load) ............................................................................100,000 cycles ...................................... 100,000 cycles
Total Resistance Shift ...........................................................................(Linear taper) 10 ohms or ..................... (All tapers) ±5 % TRS maximum
Moisture Resistance (MIL-STD-202, Method 103, Condition B)
Total Resistance Shift ...........................................................................(B & E tapers) ±10 % maximum ........... ±5 % maximum (all tapers)
IP Rating .....................................................................................................IP 40 ...................................................... IP 40
Starting and Running Torque (Non-Locking Bushings)
Single Section ................................................................................................................................................................. 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Dual Section .................................................................................................................................................................... 0.14 to 1.06 N-cm (0.2 to 1.5 oz.-in.)
Triple Section ................................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Quadruple Section .......................................................................................................................................................... 0.35 to 1.41 N-cm (0.5 to 2.0 oz.-in.)
Starting and Running Torque (Locking Bushings) ..................................................................................................... 0.14 to 2.82 N-cm (0.2 to 4.0 oz.-in.)
Shaft Locking Torque with Locknut @ 10 in-lb. (B & E Bushings) ........................................................................................................ 14 N-cm (20 oz-in.)
Mounting ...................................................................................................................................................................1.7-2.0 N-m (15-18 lb.-in.) maximum
Weight (Single Section).............................................................................................................................................................................. 21 grams maximum
(Each Additional Section) ...................................................................................................................................................................... 6 grams maximum
Terminals .......................................................................................................................................................................... Printed circuit terminals or J-Hooks
Soldering Condition .................................................................. Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ” wire diameter.
Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean flux.
Marking.......................................................................... Manufacturer’s trademark, wiring diagram, date code and resistance, manufacturer’s part number
Ganging (multiple section potentiometers) ..................................................................................................................................................... 4 cup maximum
Hardware ...........................................One lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.
For dimensional drawings see pages 3 & 4.
For ordering information see page 5.
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
*RoHS Directive 2002/95/EC Jan 27, 2003 including Annex.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
81/82 - 5/8 ” Square Single-Turn Panel Control
85/86 - 5/8 ” Square Single-Turn Panel Control with Rotary Switch
Rotary Switch Specifications
Initial Electrical Characteristics
1
Contacts:
DPST ...............................................................................................................................................................................N.O/N.O.,N.C./N.C. or N.O./N.C.
DPDT ................................................................................................................................................................................2 N.O./N.C. (break before make)
Power Rating (Resistive Load):
DPST ............................................................................................................ 2 A @ 125 volts RMS-60 Hz or 2 A @ 28 VDC, 1 A @ 250 volts RMS-60 Hz
DPDT ........................................................................................................................................................... 1 A @ 125 volts RMS-60 Hz or 1 A @ 28 VDC
Operating Temperature Range ...........................................................................................................................................................................0 °C to +70 °C
Storage Temperature Range ........................................................................................................................................................................ -65 °C to +125 °C
Vibration (Dual Section) ....................................................................................................................................................................................................... 8 G
(Triple Section) .................................................................................................................................................................................................... 5 G
(Quadruple Section) ........................................................................................................................................................................................... 3 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Shock (Dual Section) ......................................................................................................................................................................................................... 20 G
(Triple Section) ...................................................................................................................................................................................................... 15 G
(Quadruple Section) ............................................................................................................................................................................................. 10 G
Contact Resistance ........................................................................................................................................................................ 10 milliohms maximum
Contact Bounce ......................................................................................................................................................................... 0.1 millisecond maximum
Rotational Life ..................................................................................................................................................................................................... 25,000 cycles
Switch Actuating Torque (50% Duty cycle @ Rated Power Load) .................................................................................. 1.41 to 4.94 N-cm (2 to 7 oz.-in.)
Contact Resistance ...................................................................................................................................................................... 100 milliohms maximum
Moisture Resistance (MIL-STD-202, Method 106, Condition B)
Contact Resistance (0.1 VDC-10 mA) ............................................................................................................................................ 10 milliohms maximum
Switch Housing Material ................................................................................................................. High temperature, flame retardant, thermosetting plastic
Mechanical Characteristics
1
Actuating Torque (Each Section, Switch Module Only) ....................................................................................................... 3.53 to 10.6 N-cm (5 to 15 oz.-in.)
Running Torque (Out of Detent, 2-4 Module Assembly)..................................................................................................... 0.21 to 1.41 N-cm (0.3 to 2 oz.-in.)
Detent ..................................................................................................................................................................................................... CW or CCW standard
Contact Materials ..........................................................................................................................................................................Fine silver with gold overlay
Terminal Styles .................................................................................................................................................................................................. Solder lug only
Standard Orientation ..............................................................................................................................................................In-line with control terminals
Optional .......................................................................................................................................................................... Rotated 90 ° CCW from standard
Terminal Strength (Before and After Soldering Heat Exposure) .......................................................................................................... 0.9 Kg (2 lbs.) minimum
NOTE: Model 81/82 performance specifications do not apply to units subjected to printed circuit board cleaning procedures.
1At room ambient: +25 °C nominal and 50 % relative humidity nominal, except as noted.
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications
I have used or seen quite a lot of domestic chips. I won't mention Shenwei and Loongson. Basically, anyone who works with domestic products will come into contact with them. The energy efficiency rati...
I installed a switching power supply with an input power of 12W for the first time. The input filter capacitor is 47uF/400V. When the capacitor is powered on, it charges and generates a large current....
[align=center][color=#9932cc]NO3. Receiving data from the cloud[/color][/align] The overview of receiving data from the cloud is as follows:The Rapid lot kit is connected to the mobile phone via BLE, ...
Online Exhibition Details: Littelfuse's efficient, reliable and precise power control and circuit protection solutions are used in industry, transportation, communications, medical treatment and new e...
Semiconductor vendors support their microcontrollers with development boards such as evaluation boards and demonstration boards. The intended use of these boards is to allow engineers to first become ...
The theoretical amplification factor of INA128 is 100 times when RG=500 ohms. When the input is 150KHz, 10mV AC, its amplification factor remains almost unchanged. Why is it like this?...
Chip decryption is also called MCU decryption, MCU cracking, chip cracking, IC decryption. We usually call CPLD decryption and DSP decryption chip decryption. MCU attackers use special or homemad...[Details]
Today let's talk about GPIO. For a novice like me, GPIO is just like how to open the door before I learn to drive. From this, we can see the importance of learning STM32. Well, without further ado, l...[Details]
According to Jiwei.com, Taiwanese media reported that Han Kuo-yu intends to find Morris Chang as his running mate. Han Kuo-yu's campaign headquarters issued a statement yesterday afternoon saying tha...[Details]
Almost all similar books introduce comprehensive application examples such as a real-time clock example such as "perpetual calendar + temperature display + alarm clock + stopwatch" or an MP3 player ex...[Details]
This paper introduces a method of automatically generating character dot matrix by directly using the image processing function of LabVIEW. The program can automatically obtain dot matrix of variou...[Details]
I am engaged in switching power supply. I used to make adapters, chargers, and iron-shell switching power supplies. Later, I made LED power supplies . At first, I made some 1W and 3W high-power LED d...[Details]
1. Chat After reading the sdcc man page and datasheet, I wrote a few small programs using sdcc. I spent most of my time debugging code, so I decided to review UCOS during this time. Since this is the...[Details]
Preface:
At present, the software and hardware of the set-top box platform are closely integrated and inseparable. All software is integrated by the set-top box manufacturers. In order to cope ...[Details]
MT510TV4 is a 104-inch human-machine interface product in the MT500 series of Weilun Technology. It can display the value and status of internal registers or relays of PLC, MCU, inverter, temperatu...[Details]
Data shows that in 2018, the global semiconductor sales were about 450 billion US dollars, and China's imports accounted for 312 billion US dollars. It cannot be ignored that in the fields of compute...[Details]
Provide customers with enhanced compatibility, cost-efficiency and accelerated time to market for their smartwatch products January 9, 2024, Las Vegas, USA - VeriSilicon today announced that QDay T...[Details]
The crossover network
This is one of those things you just have to design by ear. No computer simulations here. I had tried simulating it with the help of software but what measured good and what ...[Details]
Among the blue, green, and blue-green diodes currently produced, all use GaN-based sapphire substrates and MOCVD technology to produce chips. The characteristics of this type of chip are: good brightn...[Details]
All-vanadium liquid flow battery bipolar plate production line project (published after approval) Construction unit: Dalian Rongke Energy Storage Group Co., Ltd. Design unit: Information Industry Elec...[Details]
Domestic Chip Exchange
京公网安备 11010802033920号
EEWORLD
