Y0107723K000V9L datasheet, PDF

Datasheet> All Categories > Passive components> The resistor> Y0107723K000V9L

Y0107723K000V9L: DescriptionFixed Resistor, Metal Foil, 0.8W, 723000ohm, 600V, 0.005% +/-Tol, -2,2ppm/Cel,; CategoryPassive components The resistor; File Size451KB，6 Pages; ManufacturerVishay; Websitehttp://www.vishay.com; Environmental Compliance

Download Datasheet Parametric View All

Y0107723K000V9L Overview

Fixed Resistor, Metal Foil, 0.8W, 723000ohm, 600V, 0.005% +/-Tol, -2,2ppm/Cel,

Y0107723K000V9L Parametric

Parameter Name	Attribute value
Is it Rohs certified?	conform to
Maker	Vishay
Reach Compliance Code	unknow
ECCN code	EAR99
structure	Hermetically Sealed
JESD-609 code	e3
Lead diameter	0.64 mm
Lead length	25.4 mm
Number of terminals	2
Maximum operating temperature	125 °C
Minimum operating temperature	-55 °C
Package diameter	12.7 mm
Package length	38.1 mm
Package form	Axial
method of packing	Bulk
Rated power dissipation(P)	0.8 W
resistance	723000 Ω
Resistor type	FIXED RESISTOR
series	H SERIES-AXIAL
technology	METAL FOIL
Temperature Coefficient	-2,2 ppm/°C
Terminal surface	Tin (Sn)
Tolerance	0.005%
Operating Voltage	600 V

Preview

Download Datasheet

View All

H Series

Vishay Foil Resistors

New Generation of Secondary Standards Hermetically Sealed High Precision Bulk

Metal

Foil Technology Resistors with TCR of ± 2 ppm/°C, Tolerance of ± 0.001 % and

Load Life Stability of ± 0.005 % (Metrology, Laboratory, Instrumentation, Industrial)

FEATURES

•

Temperature coefficient of resistance (TCR):

± 2 ppm/°C typical (- 55 °C to + 125 °C, + 25 °C

ref.).

For

ultra

high

performances

(instrumentation and metrology) please refer to

the last page

•

Resistance range: 5

to 1.84 MΩ (higher or

lower values of resistance available)

•

Vishay Foil resistors are not restricted to standard values;

specific “as required” values can be supplied at no extra

cost or delivery (e.g. 1K2345 vs. 1K)

•

Power rating: 0.3 W to 2.5 W at + 25 °C (depending on

model - see table 2)

•

Tolerance: to ± 0.001 % (10 ppm)

•

Load life stability to ± 0.002 % (20 ppm) at 25 °C, 2000 h

at rated power

•

Load life stability can be considerably improved

through in-house stabilization

•

Shelf life stability: ± 2 ppm for at least 6 years

(unaffected by humidity)

•

Electrostatic discharge (ESD) up to 25 000 V

•

Rise time: 1 ns effectively no ringing

•

Thermal stabilization time < 1 s (nominal value achieved

within 10 ppm of steady state value)

•

Current noise: 0.010 µV

RMS

/V of applied voltage (< - 40 dB)

•

Thermal EMF: 0.05 µV/°C typical

•

Voltage coefficient: < 0.1 ppm/V

•

Non-inductive: < 0.08 µH

•

Non-inductive, non-capacitive design

•

Non hot spot design

•

Terminal finish available: lead (Pb)-free or tin/lead alloy

•

Impervious to harmful environments - oil-filled

•

Compliant to RoHS directive 2002/95/EC

•

Prototype quantities available in just 5 working days

or sooner. For more information, please contact

foil@vishaypg.com

•

For better performances (values, TCR, tolerance, stability),

please see the HZ series

INTRODUCTION

The H series resistors are oil-filled, hermetically sealed ultra

precision resistors and are used as secondary standards for

metrology applications.

The hermetic sealing eliminates the ingress of moisture and

oxygen, while the oil acts as a thermal conductor, thus

eliminating the long-term degradation elements of unsealed

resistors, while at the same time allowing the device to

accept short periods of overload without degradation.

Vishay’s Bulk Metal

Foil outperforms all other resistor

technologies available today for applications that require

precision and stability. When combined with the hermetic

sealing and oil filling, the H series resistors become

the most

precise and stable resistors available.

With accuracies of 0.001 %, a resistance range from 5

to 1.84 MΩ, and long term shelf life of less than 2 ppm,

these devices are virtually secondary standards that can be

carried in sets for daily or periodic calibration of factory

measurement equipment.

The H series is available with laboratory and metrology

level precision and long-term stability with additional

in-house oriented processes such as: chip stabilization,

special TCR plotting, additional treatments for ultra

stability and special post manufacturing operations

(PMO). (Please refer to the last page)

TABLE 1 - TCR VS. RESISTANCE VALUE

RESISTANCE

VALUE (Ω)

100 to < 1M84

50 to < 100

5 to < 50

TYPICAL TCR AND MAX. SPREAD

(- 55 °C to + 125 °C, + 25 °C ref.)

(ppm/°C)

± 2 ± 2.5

± 2 ± 3.5

± 2 ± 4.5

FIGURE 1 - SHELF LIFE - VHA518-11

12K9 VS. QHE

0.9

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

- 0.1

100 200 300 400 500 600 700 800 900 1000

Note

• For maximum TCR < 1 ppm/°C, see VHP100 and contact

application engineering

* Pb containing terminations are not RoHS compliant, exemptions may apply

Resistance Change (ppm)

Time (Days)

Document Number: 63006

Revision: 23-Mar-10

For any questions, contact:

foil@vishaypg.com

www.foilresistors.com

Recommended Resources

LB1405, 15-level display circuit application (a)

Light controlled flashing road sign light circuit

Refrigerator temperature display device circuit diagram

Haier GD268E mobile phone repair diagram 2

DT860B type 3 1/2 digit automatic range digital multimeter circuit

Common base transformer feedback oscillation circuit

New USB to 485, TTL adapter sold as second-hand: Brand new USB to 485, TTL adapters are sold as second-hand, 5 yuan each, free shipping for more than two, leave a message if you want~...; liuyudian TI Technology Forum

How to ensure that DA has no output when downloading the program: Project requirements: DA has no output when downloading the program, how to ensure this? What should I consider?...; sudongpo2018 Motor Drive Control（Motor Control）

[NXP Rapid IoT Review] Standby current of Rapid IoT Studio online IDE generated projects: I recently downloaded a project generated by Rapid IoT Studio online IDE to the development board. It runs out of power after a short time after it is fully charged. Today I removed the outer shell an...; littleshrimp RF/Wirelessly

Getting Started with PKE PEPS Chip ATA5702 /ATA5700 Development: I have been engaged in the research and development of automotive products for many years, mainly engaged in aftermarket anti-theft devices, keyless, PEPS (PKE) smart one-button start and other produc...; tpms方案 Microchip MCU

[nRF52840 DK Review] Unboxing, Development Environment and Data Preparation: [i=s] This post was last edited by jj1989 on 2018-11-29 19:43 [/i] [size=4][md]## Preface I have been following this board for a long time, and now I have it ready for evaluation. As Nordic's most adv...; jj1989 RF/Wirelessly

LIS25BA bone vibration sensor driver problem: I was recently writing a driver for the LIS25BA bone vibration sensor. The development platform was stm32769i-disc. When reading the manual, I encountered several problems with the sensor chip:1. The ...; athrun_chen MEMS sensors

Shortcut: 00 01 02 03 04 05 06 07 08 09 0A 0C 0F 0J 0L 0M 0R 0S 0T 0Z 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 1H 1K 1M 1N 1P 1S 1T 1V 1X 1Z 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F 2G 2K 2M 2N 2P 2Q 2R 2S 2T 2W 2Z 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F 3G 3H 3J 3K 3L 3M 3N 3P 3R 3S 3T 3V 40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4M 4N 4P 4S 4T 50 51 52 53 54 55 56 57 58 59 5A 5B 5C 5E 5G 5H 5K 5M 5N 5P 5S 5T 5V 60 61 62 63 64 65 66 67 68 69 6A 6C 6E 6F 6M 6N 6P 6R 6S 6T 70 71 72 73 74 75 76 77 78 79 7A 7B 7C 7M 7N 7P 7Q 7V 7W 7X 80 81 82 83 84 85 86 87 88 89 8A 8D 8E 8L 8N 8P 8S 8T 8W 8Y 8Z 90 91 92 93 94 95 96 97 98 99 9A 9B 9C 9D 9F 9G 9H 9L 9S 9T 9W

Popular Components