• Memory backup of remote controllers and handy cassette player during battery exchange
Part Number System
FG
0H
473
Z
F
Environmental Impact Reduced Product
Capacitance tolerance:
Z: +80%, –20%
Capacitance: 0.047 F
First two digits represent significant figures.
Third digit specifies number of zeros to follow
μ
F code.
Maximum Operating voltage
0H: 5.5 VDC
Super Capacitor: FG series
28 Super Capacitors Vol.07
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2007.08.03 P0862SUCA16VOL07E
Specifications: FG Series
Items
Operating Temperature Range
Maximum Operating Voltage.
Nominal Capacitance Range
Capacitance Allowance
Equivalent Series Resistance
Current (30-minute value)
–25˚C to +70˚C
5.5 Vdc, 3.5 Vdc
Refer to standard ratings
Specifications
Test Conditions
Conforming to JIS C 5102
-1994
+80 %, –20 %
Refer to standard ratings
Refer to standard ratings
Capacitance
More than 90% of initial requirement
Equivalent series resistance Not to exceed 120% of initial requirement
Current at 30 min.
Not to exceed 120% of initial requirement
Surge Voltage
Appearance
No obvious abnormality
Refer to characteristics measuring method.
Refer to characteristics measuring method.
Refer to characteristics measuring method.
Refer to characteristics measuring method.
Conforms to 7.14
Surge voltage: 6.3V(5.5V products),
4.0V(3.5V products)
Temperature: 70±2˚C
Charge: 30 sec.
Discharge: 9 min 30 sec.
Number of cycles: 1000 cycles
Series resistance:
0.010F: 1500
Ω
0.47F: 30
Ω
0.022F: 560
Ω
1.0F: 15
Ω
0.047F: 300
Ω
1.5F: 15
Ω
0.10F: 150
Ω
2.2F: 10
Ω
0.22F: 56
Ω
4.7F: 10
Ω
Discharge resistance: 0
Ω
Conforms to 7.12
Phase 1: +25
±2˚C
Phase 2: –25
±2˚C
Phase 4: +25
±2˚C
Phase 5: +70
±2˚C
Phase 6: +25
±2˚C
Temperature
Variation of
Characteristics
Phase 2
Phase 5
Phase 6
Lead Strength (Tensile)
Vibration Resistance
Capacitance
50% or higher of initial value
Equivalent series resistance 4 or less times initial value
Capacitance
200% or below of initial value
Equivalent series resistance Satisfy initial standard value
Current at 30 min.
1.5 CV (mA) or below
Capacitance
Within
±20%
of initial value
Equivalent series resistance Satisfy initial standard value
Current at 30 min.
Satisfy initial standard value
No loosening nor permanent damage of the leads
Capacitance
Equivalent series resistance
Satisfy
initial standard value
Current at 30 min.
Appearance
No obvious abnormality
Conforms to 8.1.2 (1)
Conforms to 8.2.3 (1)
Frequency: 10 to 55 Hz
Test duration: 6 hours
Conforms to 8.4
Solder temperature: 245±5˚C
Dipping duration: 5±0.5 sec.
Should be dipped up to 1.6mm from
the lower end of the capacitor
Conforms to 8.5
Solder temperature: 260±10˚C
Dipping duration: 10±1 sec.
Should be dipped up to 1.6mm from
the lower end of the capacitor
Conforms to 9.3
Temperature: –25˚C
→
normal temperature
→
+70˚C
→
normal temperature
Number of cycles: 5 cycles
Conforms to 9.5
Temperature: 40±2˚C
Relative humidity: 90 to 95% RH
Test duration: 240
±8hours
Conforms to 9.10
Temperature: 70±2˚C
Voltage applied: MAX. Operating Voltage
Series protection resistance: 0Ω
Test duration: 1000
+48
hours
-0
Voltage applied: 5.0VDC
Charging
(with case side terminal negative)
Condition
Series resistance: 0Ω
Charging time: 24 hours
Time: 24 hours
Storage
Temperature: Lower than 25 ˚C
Humidity: Lower than 70%RH
Solderability
3 / 4 or more of the pin surface should be covered with new solder
Soldering Heat Resistance
Temperature Cycle
Humidity Resistance
High Temperature Load
Capacitance
Equivalent series resistance
Current at 30 min.
Appearance
Capacitance
Equivalent series resistance
Current at 30 min.
Appearance
Capacitance
Equivalent series resistance
Current at 30 min.
Appearance
Capacitance
Equivalent series resistance
Current at 30 min.
Appearance
Satisfy initial standard value
No obvious abnormality
Satisfy initial standard value
No obvious abnormality
Within
±20%
of initial value
1.2 or less times initial standard value
1.2 or less times initial standard value
No obvious abnormality
Within
±30%
of initial value
Twice or less times initial standard value
Twice or less times initial standard value
No obvious abnormality
Voltage Holding Characteristics
(Self Discharge)
Voltage between terminal leads higher than 4.2V
(3.5V Type: no standard)
30 Super Capacitors Vol.07
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2007.08.03 P0862SUCA16VOL07E
●
FGH Type
Dimensions
L Min.
H Max.
Sleeve
Part No.
P
±
0.5
D
11.0
11.0
16.5
21.5
H
5.5
7.0
8.0
9.5
0.3 Min.
Dimensions mm
P
5.08
5.08
5.08
7.62
d
1
0.2
0.2
0.4
0.6
d
2
1.2
1.2
1.2
1.2
L
2.7
2.7
2.7
3.0
Weight
g
1.0
1.3
4.1
7.2
φ
D
±
0.5
FGH0H104ZF
FGH0H224ZF
d
1
±
0.1
FGH0H474ZF
d
2
±
0.1
FGH0H105ZF
Lead (case)
Lead
Note:
Weight is typical.
–
Negative polarity
Standard Ratings
Part Number
Max.
Operating Voltage
(V)
5.5
5.5
5.5
5.5
Nominal Capacitance
Charge System
(F)
-
-
-
-
Discharge System
(F)
0.10
0.22
0.47
1.0
Max. ESR
(at 1 kHz)
(Ω)
100
100
65
35
Max. Current at
30 minutes
(mA)
0.15
0.33
0.71
1.5
Voltage
Holding
Characteristic
Min.(V)
4.2
4.2
4.2
4.2
FGH0H104ZF
FGH0H224ZF
FGH0H474ZF
FGH0H105ZF
Super Capacitors Vol.07 31
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2007.08.03 P0862SUCA16VOL07E
Specifications: FG Series FGH Type
Items
Operating Temperature Range
Maximum Operating Voltage.
Nominal Capacitance Range
Capacitance Allowance
Equivalent Series Resistance
Current (30-minute value)
Specifications
–25˚C to +70˚C
5.5 Vdc
Refer to standard ratings
+80 %, –20 %
Refer to standard ratings
Refer to standard ratings
Capacitance
More than 90% of initial requirement
Equivalent series resistance Not to exceed 120% of inital requirement
Current at 30 min.
Not to exceed 120% of inital requirement
Test Conditions
Conforming to JIS C 5102
-1994
Surge Voltage
Appearance
No obvious abnormality
Refer to characteristics measuring method.
Refer to characteristics measuring method.
Refer to characteristics measuring method.
Refer to characteristics measuring method.
Conforms to 7.14
Surge voltage: 6.3V
Temperature: 70±2˚C
Charge: 30 sec.
Discharge: 9 min 30 sec.
Number of cycles: 1000 cycles
Series resistance:
0.10F: 150
Ω
0.22F: 56
Ω
0.47F: 30
Ω
1.0F: 15
Ω
Discharge resistance: 0
Ω
Conforms to 7.12
Phase 1: +25
±2˚C
Phase 2: –25
±2˚C
Phase 4: +25
±2˚C
Phase 5: +70
±2˚C
Phase 6: +25
±2˚C
Phase 2
Temperature
Variation of
Characteristics
Phase 5
Phase 6
Lead Strength (Tensile)
Vibration Resistance
Capacitance
50% or higher of initial value
Equivalent series resistance 4 or less times initial value
Capacitance
200% or below of initial value
Equivalent series resistance Satisfy initial standard value
Current at 30 min.
1.5 CV (mA) or below
Capacitance
Within
±20%
of initial value
Equivalent series resistance Satisfy initial standard value
Current at 30 min.
Satisfy initial standard value
No loosening nor permanent damage of the leads
Capacitance
Equivalent series resistance Meet initial standard value
Current at 30 min.
Appearance
No obvious abnormality
Conforms to 8.1.2 (1)
Conforms to 8.2.3
Frequency: 10 to 55 Hz
Test duration: 6 hours
Conforms to 8.4
Solder temperature: 245±5˚C
Dipping duration: 5±0.5 sec.
Should be dipped up to 1.6mm from
the lower end of the capacitor
Conforms to 8.5
Solder temperature: 260±10˚C
Dipping duration: 10±1 sec.
Should be dipped up to 1.6mm from
the lower end of the capacitor
Conforms to 9.3
Temperature: –25˚C
→
normal temperature
→
+70˚C
→
normal temperature
Number of cycles: 5 cycles
Conforms to 9.5
Temperature: 40±2˚C
Relative humidity: 90 to 95% RH
Test duration: 240
±8hours
Conforms to 9.10
Temperature: 70±2˚C
Voltage applied: 5.5Vdc
Series protection resistance: 0Ω
+48
Test duration: 1000
-0
hours
Voltage applied: 5.0VDC
(with case side terminal negative)
Charging
Series resistance: 0Ω
Condition
Charging time: 24 hours
Time: 24 hours
Temperature: Lower than 25˚C
Storage
Humidity: Lower than 70%RH
Solderability
3 / 4 or more of the pin surface should be covered with new solder
Solder Heat Resistance
Temperature Cycle
Humidity Resistance
High Temperature Load
Capacitance
Equivalent series resistance
Current at 30 min.
Appearance
Capacitance
Equivalent series resistance
Current at 30 min.
Appearance
Capacitance
Equivalent series resistance
Current at 30 min.
Appearance
Capacitance
Equivalent series resistance
Current at 30 min.
Appearance
Should satisfy initial standard value
No obvious abnormality
Satisfy initial standard value
No obvious abnormality
Within
±20%
of initial value
1.2 or less times initial standard value
1.2 or less times initial standard value
No obvious abnormality
Within
±30%
of initial value
Twice or less times initial standard value
Twice or less times initial standard value
No obvious abnormality
Voltage Holding Characteristics
(Self Discharge)
Voltage between terminal leads higher than 4.2V
32 Super Capacitors Vol.07
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
DirectIO: The SRIO DirectIO transfer class is similar to a memcopy transfer between two SRIO devices. One of the devices is the master that initiates the transfer. The second device is the slave that ...
The project requires that the routing and terminal nodes be selected by the program. Can zstack support this function?
By modifying the code, in routing mode, debugging found that the program cannot e...
Share this article to summarize the use and connection methods of NPN and PNP transistors.
In the microcontroller application circuit, the main function of the transistor is switching.
How to use PNP ...
These are two different power supplies. Can I collect the voltage drop of R0? I get the AD value of the voltage and divide it by the resistance value to get the static power consumption of the calibra...
I am currently studying the Internet of Things at school. My project is water quality monitoring. We use the STM32F103vet6 industrial control board and the development environment is keil4. There is a...
1. This evaluation is about the ADC module of RA6M4Although the project was built using RTT's Scons before, RTT was never used to create threads, and the modules were always evaluated using the bare m...
Microsemi Corporation (Nasdaq: MSCC), a leading supplier of semiconductor technology products that help power management, safety, reliability and high performance, announced the availability of ...[Details]
V-cone flowmeter is a relatively important type of flowmeter. Its measurement accuracy and range of measurement objects are very different from other types of flowmeters, especially differential pres...[Details]
As the global
demand
for
new energy vehicles
continues to grow, the
power battery
market has also ushered in unprecedented development opportunities. According to the latest dat...[Details]
Recently, at the request of a friend, I studied the simulation under QEMU MINI2440. I thought this process was nothing, but I found a lot of problems in this study. I wrote it down to share with ...[Details]
Everywhere you look, you hear the phrase “the car of the future.” As the automotive industry continues to leap forward with self-driving cars, what will the driving experience be like when people don...[Details]
As renewable and alternative energy sources become an important means to reduce the world's dependence on fossil fuels, fuel cell technology has been continuously developed, and planar fuel cells are...[Details]
Based on the clock strategy of the specific development board: The multiplication/division coefficients need to be configured before enabling the PLL, so all system clock divider coefficients and P...[Details]
A document from an Apple Watch retail demo model shows that at some point, Apple considered using "Apple Watch Pro" branding on some smartwatch models. The document, shared by Apple Demo on Twitter...[Details]
Recently, Roland Berger, a leading global strategic management consulting firm, and Horizon Robotics, a global leader in edge AI chips, released the "Smart Cockpit Development Trend White Paper". The...[Details]
On December 8, at the construction site of the Lucheng Renhe 300MW/600MWh independent energy storage power station project, the sounds of welding, cutting and machines were intertwined, creating a sce...[Details]
Recently, Yu Jingmin, executive vice general manager of SAIC Passenger Vehicle, revealed in a media interview that the solid-state battery technology developed by SAIC will be first applied to MG b...[Details]
1. Introduction to Thunderbolt Ultra High-Speed Interface On February 24, 2011, local time in the United States, Intel officially released the Intel Labs product code-named "Light Peak" technology ...[Details]
What are the buzzwords of 2019? According to the "Top Ten Buzzwords of 2019" released by "Yiwenjuezi", ① Mutual Learning among Civilizations; ② Blockchain; ③ Hard Core; ④ Fusion; ⑤ XX Thousands of ...[Details]
在计算机广泛应用的今天，数据采集的重要性是十分显著的。它是计算机与外部物理世界连接的桥梁。各种类型信号采集的难易程度差别很大。实际采集时，噪声也可能带来一些麻烦。数据采集时，有一些基本原理要注意，还有更多的实际的问题要解决。
Sampling frequency, anti-aliasing filter, and number of samples
...[Details]
For DC power supply, the purity of DC is evaluated, so there is a ripple test . Voltage fluctuations are generally divided into two types: ripple and noise. Generally speaking, fluctuations with a fr...[Details]
DSP and ARM Processors
京公网安备 11010802033920号
EEWORLD
