• Memory backup of remote controllers and handy cassette player during battery exchange
Part Number System
FG
0H
473
Z
F
Environmental Impact Reduced Product
Capacitance tolerance:
Z: +80%, –20%
Capacitance: 0.047 F
First two digits represent significant figures.
Third digit specifies number of zeros to follow
μ
F code.
Maximum Operating voltage
0H: 5.5 VDC
Super Capacitor: FG series
28 Super Capacitors Vol.07
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2007.08.03 P0862SUCA16VOL07E
Specifications: FG Series
Items
Operating Temperature Range
Maximum Operating Voltage.
Nominal Capacitance Range
Capacitance Allowance
Equivalent Series Resistance
Current (30-minute value)
–25˚C to +70˚C
5.5 Vdc, 3.5 Vdc
Refer to standard ratings
Specifications
Test Conditions
Conforming to JIS C 5102
-1994
+80 %, –20 %
Refer to standard ratings
Refer to standard ratings
Capacitance
More than 90% of initial requirement
Equivalent series resistance Not to exceed 120% of initial requirement
Current at 30 min.
Not to exceed 120% of initial requirement
Surge Voltage
Appearance
No obvious abnormality
Refer to characteristics measuring method.
Refer to characteristics measuring method.
Refer to characteristics measuring method.
Refer to characteristics measuring method.
Conforms to 7.14
Surge voltage: 6.3V(5.5V products),
4.0V(3.5V products)
Temperature: 70±2˚C
Charge: 30 sec.
Discharge: 9 min 30 sec.
Number of cycles: 1000 cycles
Series resistance:
0.010F: 1500
Ω
0.47F: 30
Ω
0.022F: 560
Ω
1.0F: 15
Ω
0.047F: 300
Ω
1.5F: 15
Ω
0.10F: 150
Ω
2.2F: 10
Ω
0.22F: 56
Ω
4.7F: 10
Ω
Discharge resistance: 0
Ω
Conforms to 7.12
Phase 1: +25
±2˚C
Phase 2: –25
±2˚C
Phase 4: +25
±2˚C
Phase 5: +70
±2˚C
Phase 6: +25
±2˚C
Temperature
Variation of
Characteristics
Phase 2
Phase 5
Phase 6
Lead Strength (Tensile)
Vibration Resistance
Capacitance
50% or higher of initial value
Equivalent series resistance 4 or less times initial value
Capacitance
200% or below of initial value
Equivalent series resistance Satisfy initial standard value
Current at 30 min.
1.5 CV (mA) or below
Capacitance
Within
±20%
of initial value
Equivalent series resistance Satisfy initial standard value
Current at 30 min.
Satisfy initial standard value
No loosening nor permanent damage of the leads
Capacitance
Equivalent series resistance
Satisfy
initial standard value
Current at 30 min.
Appearance
No obvious abnormality
Conforms to 8.1.2 (1)
Conforms to 8.2.3 (1)
Frequency: 10 to 55 Hz
Test duration: 6 hours
Conforms to 8.4
Solder temperature: 245±5˚C
Dipping duration: 5±0.5 sec.
Should be dipped up to 1.6mm from
the lower end of the capacitor
Conforms to 8.5
Solder temperature: 260±10˚C
Dipping duration: 10±1 sec.
Should be dipped up to 1.6mm from
the lower end of the capacitor
Conforms to 9.3
Temperature: –25˚C
→
normal temperature
→
+70˚C
→
normal temperature
Number of cycles: 5 cycles
Conforms to 9.5
Temperature: 40±2˚C
Relative humidity: 90 to 95% RH
Test duration: 240
±8hours
Conforms to 9.10
Temperature: 70±2˚C
Voltage applied: MAX. Operating Voltage
Series protection resistance: 0Ω
Test duration: 1000
+48
hours
-0
Voltage applied: 5.0VDC
Charging
(with case side terminal negative)
Condition
Series resistance: 0Ω
Charging time: 24 hours
Time: 24 hours
Storage
Temperature: Lower than 25 ˚C
Humidity: Lower than 70%RH
Solderability
3 / 4 or more of the pin surface should be covered with new solder
Soldering Heat Resistance
Temperature Cycle
Humidity Resistance
High Temperature Load
Capacitance
Equivalent series resistance
Current at 30 min.
Appearance
Capacitance
Equivalent series resistance
Current at 30 min.
Appearance
Capacitance
Equivalent series resistance
Current at 30 min.
Appearance
Capacitance
Equivalent series resistance
Current at 30 min.
Appearance
Satisfy initial standard value
No obvious abnormality
Satisfy initial standard value
No obvious abnormality
Within
±20%
of initial value
1.2 or less times initial standard value
1.2 or less times initial standard value
No obvious abnormality
Within
±30%
of initial value
Twice or less times initial standard value
Twice or less times initial standard value
No obvious abnormality
Voltage Holding Characteristics
(Self Discharge)
Voltage between terminal leads higher than 4.2V
(3.5V Type: no standard)
30 Super Capacitors Vol.07
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2007.08.03 P0862SUCA16VOL07E
●
FGH Type
Dimensions
L Min.
H Max.
Sleeve
Part No.
P
±
0.5
D
11.0
11.0
16.5
21.5
H
5.5
7.0
8.0
9.5
0.3 Min.
Dimensions mm
P
5.08
5.08
5.08
7.62
d
1
0.2
0.2
0.4
0.6
d
2
1.2
1.2
1.2
1.2
L
2.7
2.7
2.7
3.0
Weight
g
1.0
1.3
4.1
7.2
φ
D
±
0.5
FGH0H104ZF
FGH0H224ZF
d
1
±
0.1
FGH0H474ZF
d
2
±
0.1
FGH0H105ZF
Lead (case)
Lead
Note:
Weight is typical.
–
Negative polarity
Standard Ratings
Part Number
Max.
Operating Voltage
(V)
5.5
5.5
5.5
5.5
Nominal Capacitance
Charge System
(F)
-
-
-
-
Discharge System
(F)
0.10
0.22
0.47
1.0
Max. ESR
(at 1 kHz)
(Ω)
100
100
65
35
Max. Current at
30 minutes
(mA)
0.15
0.33
0.71
1.5
Voltage
Holding
Characteristic
Min.(V)
4.2
4.2
4.2
4.2
FGH0H104ZF
FGH0H224ZF
FGH0H474ZF
FGH0H105ZF
Super Capacitors Vol.07 31
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2007.08.03 P0862SUCA16VOL07E
Specifications: FG Series FGH Type
Items
Operating Temperature Range
Maximum Operating Voltage.
Nominal Capacitance Range
Capacitance Allowance
Equivalent Series Resistance
Current (30-minute value)
Specifications
–25˚C to +70˚C
5.5 Vdc
Refer to standard ratings
+80 %, –20 %
Refer to standard ratings
Refer to standard ratings
Capacitance
More than 90% of initial requirement
Equivalent series resistance Not to exceed 120% of inital requirement
Current at 30 min.
Not to exceed 120% of inital requirement
Test Conditions
Conforming to JIS C 5102
-1994
Surge Voltage
Appearance
No obvious abnormality
Refer to characteristics measuring method.
Refer to characteristics measuring method.
Refer to characteristics measuring method.
Refer to characteristics measuring method.
Conforms to 7.14
Surge voltage: 6.3V
Temperature: 70±2˚C
Charge: 30 sec.
Discharge: 9 min 30 sec.
Number of cycles: 1000 cycles
Series resistance:
0.10F: 150
Ω
0.22F: 56
Ω
0.47F: 30
Ω
1.0F: 15
Ω
Discharge resistance: 0
Ω
Conforms to 7.12
Phase 1: +25
±2˚C
Phase 2: –25
±2˚C
Phase 4: +25
±2˚C
Phase 5: +70
±2˚C
Phase 6: +25
±2˚C
Phase 2
Temperature
Variation of
Characteristics
Phase 5
Phase 6
Lead Strength (Tensile)
Vibration Resistance
Capacitance
50% or higher of initial value
Equivalent series resistance 4 or less times initial value
Capacitance
200% or below of initial value
Equivalent series resistance Satisfy initial standard value
Current at 30 min.
1.5 CV (mA) or below
Capacitance
Within
±20%
of initial value
Equivalent series resistance Satisfy initial standard value
Current at 30 min.
Satisfy initial standard value
No loosening nor permanent damage of the leads
Capacitance
Equivalent series resistance Meet initial standard value
Current at 30 min.
Appearance
No obvious abnormality
Conforms to 8.1.2 (1)
Conforms to 8.2.3
Frequency: 10 to 55 Hz
Test duration: 6 hours
Conforms to 8.4
Solder temperature: 245±5˚C
Dipping duration: 5±0.5 sec.
Should be dipped up to 1.6mm from
the lower end of the capacitor
Conforms to 8.5
Solder temperature: 260±10˚C
Dipping duration: 10±1 sec.
Should be dipped up to 1.6mm from
the lower end of the capacitor
Conforms to 9.3
Temperature: –25˚C
→
normal temperature
→
+70˚C
→
normal temperature
Number of cycles: 5 cycles
Conforms to 9.5
Temperature: 40±2˚C
Relative humidity: 90 to 95% RH
Test duration: 240
±8hours
Conforms to 9.10
Temperature: 70±2˚C
Voltage applied: 5.5Vdc
Series protection resistance: 0Ω
+48
Test duration: 1000
-0
hours
Voltage applied: 5.0VDC
(with case side terminal negative)
Charging
Series resistance: 0Ω
Condition
Charging time: 24 hours
Time: 24 hours
Temperature: Lower than 25˚C
Storage
Humidity: Lower than 70%RH
Solderability
3 / 4 or more of the pin surface should be covered with new solder
Solder Heat Resistance
Temperature Cycle
Humidity Resistance
High Temperature Load
Capacitance
Equivalent series resistance
Current at 30 min.
Appearance
Capacitance
Equivalent series resistance
Current at 30 min.
Appearance
Capacitance
Equivalent series resistance
Current at 30 min.
Appearance
Capacitance
Equivalent series resistance
Current at 30 min.
Appearance
Should satisfy initial standard value
No obvious abnormality
Satisfy initial standard value
No obvious abnormality
Within
±20%
of initial value
1.2 or less times initial standard value
1.2 or less times initial standard value
No obvious abnormality
Within
±30%
of initial value
Twice or less times initial standard value
Twice or less times initial standard value
No obvious abnormality
Voltage Holding Characteristics
(Self Discharge)
Voltage between terminal leads higher than 4.2V
32 Super Capacitors Vol.07
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
All data in the computer must be placed in the memory. Different types of data occupy different numbers of bytes. For example, int occupies 4 bytes and char occupies 1 byte. In order to access this da...
It turned out that there was a problem with the driver in the device manager and it could not be downloaded. No matter how I installed it, it worked. Later, I deleted the related files of ftdi and xds...
As shown in the delay circuit, after power-on stabilization:
1. Isn't the voltage at point A 12V?
2. Isn’t the voltage at point B 12-0.7=11.3V?
Why are the simulated values of the voltage at points A ...
This is what I did before. I bought one myself, and then I applied for another one and won it. But now I have two different boards I applied for. I feel like I have to put this Pico board aside, so I ...
This article mainly summarizes the part about strategic iteration, focusing on explaining the principle. Li Hongyi’s video can be found online.
Finally, let’s explain the part about PPO, OpenAI’s defa...
When SM2..0 is 011, the SLEEP instruction will put the MCU into power saving mode. This mode is different from the power down mode in one respect: If the timer/counter 2 is asynchronously driven, t...[Details]
0 Introduction
The modern digital laser color printing system converts the image information containing photoelectric signals stored in the computer into laser beam control signals, and control...[Details]
According to the current polarity output by the LED driver power supply, the LED driving mode can be divided into DC driving and AC driving. DC driving is mainly for DC LEDs , and the load ...[Details]
LG Chem’s trade secrets and also used this information to obtain employment before SK Innovation. For example, one of the employees wrote key technical trade secret information about LG Chem’s electr...[Details]
Introduction: Aiming at the shortcomings of electro-hydraulic servo valve in practical application, this paper designs an electro-hydraulic servo valve controller, which significantly improves the st...[Details]
SABIC is about to debut at the 2023 Shanghai International Electronic Components Exhibition to showcase ELCRES™ high-temperature-resistant dielectric films with lower dielectric loss Saudi Basic I...[Details]
In today's
industrial automation
field,
collaborative robots
have become an emerging force that cannot be ignored. As a leader in this field, Universal
Robots
recently annou...[Details]
Employees of Nanchong Power Supply Company visited enterprises to understand customers' energy needs. Photo by Huang Yan
China Energy Storage Network News:
On April...[Details]
Since the Tesla spontaneous combustion incident this year , many new energy vehicle companies have become popular one after another as if they were under a curse. However, this "fire" has extinguishe...[Details]
Servo motors have many application areas, such as CNC machine tools, printing equipment, packaging equipment, textile equipment, laser processing equipment, robots, automated production lines, and ...[Details]
Recently, the Digital Economy Industry Research Center of CCID Consulting released the "2020-2021 China Blockchain Industry Development Research Annual Report" (hereinafter referred to as the "Report...[Details]
The evolution of vehicle E/E architecture: from traditional design to modern high-performance computing and service integration
1. Evolution of electronic/electrical architecture
Th...[Details]
Recently, the National Energy Administration held a symposium on the mid-term evaluation results of the "13th Five-Year Plan" for solar energy development. The meeting emphasized that photovoltaics...[Details]
1. Overcurrent
Overcurrent is the most frequent inverter alarm phenomenon.
1.1 Phenomenon
(1) When restarting, the circuit breaker trips as soon as the speed increases. This is a ver...[Details]
summary
The fifth article in this series explains the importance of auxiliary power in the Analog Devices Battery Backup Unit (BBU) reference design. Auxiliary power consists of a ...[Details]
PCB Design
京公网安备 11010802033920号
EEWORLD
