EEWORLDEEWORLDEEWORLD

Part Number

Search

OC-160-ALF-108BA-FREQ

Description
Sine Output Oscillator, 1MHz Min, 80MHz Max,
CategoryPassive components    oscillator   
File Size63KB,2 Pages
ManufacturerMicrosemi
Websitehttps://www.microsemi.com
Download Datasheet Parametric View All

OC-160-ALF-108BA-FREQ Overview

Sine Output Oscillator, 1MHz Min, 80MHz Max,

OC-160-ALF-108BA-FREQ Parametric

Parameter NameAttribute value
MakerMicrosemi
Reach Compliance Codecompli
Ageing1 PPM/YEAR
Frequency Adjustment - MechanicalNO
frequency stability0.01%
Frequency Stability - Voltage0.002 ppm
input power2.5 W
Installation featuresTHROUGH HOLE MOUNT
offset frequency1 kHz
Maximum operating frequency80 MHz
Minimum operating frequency1 MHz
Maximum operating temperature85 °C
Minimum operating temperature-40 °C
Oscillator typeSINE
Output impedance50 Ω
Output level1 V
Oven power supply voltage15V
phase noise-145 dBc/Hz
physical size36.07mm x 27.18mm x 19.3mm
Nominal supply voltage15 V
surface mountNO
Preheating power6 W
Maximum warm-up time30 Minute
Oven Controlled Crystal Oscillators (OCXO’s)
OC-160 Series (CO-730C)
Description:
The OC-160 Series offers low aging and excellent stability
options with quick warm-up performance with a standard
European CO-08 footprint.
Features:
Frequencies: 5, 10, 12.8, 13, 16.384, 19.44, 20, 20.48 MHz
European CO-08 Package
Excellent Temperature Stability
Superior Aging Characteristics
Very Fast Warm-up
Performance Characteristics
Parameter
Standard
Frequencies:
Package Size:
Supply Voltage:
Input Power:
Output Type:
Output Level (HCMOS):
Rise/Fall Time tr/tf (HCMOS):
Symmetry (Duty/Cycle,HCMOS):
Harmonics/subs:
Spurious:
Temperature Stability:
Characteristics
5, 10, 12.8, 13, 16.384, 19.44, 20, 20.48 MHz, Available 1 MHz to 80 MHz
35.3 x 26.9 x 19.4 mm (1.4” x 1.06” x 0.76”)
A:
15 Vdc ±5%
B:
12 Vdc ±5%
C:
5 Vdc ±5%
<6W turn-on (-20
o
C/70°C);
A:
HCMOS
<2.5W steady-state @ +25°C (-20°C/70°C)
K:
Sinewave ( >+10 dBm into 50 ohm)
Aging:
Short Term Stability (Allan Deviation):
Phase Noise (Typical @ 10 MHz):
Frequency vs. Supply:
Warm-up (Restabilization):
(Frequency relative to two hours after
turn-on following 24 hours off time
at +25
o
C with a maximum ambient
of <70
o
C)
Electrical Frequency Adjust:
Mechanical Configuration:
J:
Sinewave ( >+7 dBm into 50 ohm)
L:
Sinewave ( >+13 dBm into 50 ohm)
“0” <0. 5V, “1” >4.5V
(HCMOS)
<10 ns (10% - 90%)
(HCMOS)
50/50 ±10% (@50% level)
(HCMOS)
-20 dBc (reduced level sinewave, for optional output)
-70 dBc (for sinewave output)
B-308:
±3 x 10
-8 over
0/50°C
B-109:
±1 x 10
-9 over
0/50°C
D-508:
±5 x 10
-8 over
-20/70°C
D-509:
±5 x 10
-9 over
-20/70°C
Note: Tighter stability options
F-107:
±1 x 10
-7 over
-40/85°C
are available, contact factory.
F-108:
±1 x 10
-8 over
-40/85°C
A:
1 x 10
-8
/day, 2x10
-6
/year
B:
3 x 10
-9
/day, 1x10
-6
/year
C:
1 x 10
-9
/day, 3x10
-7
/year
D:
5 x 10
-10
/day, 1x10
-7
/year
5 x 10
-11
/second (with aging
A
or
B);
5 x 10
-12
/second (with aging
C
or
D)
With Aging:
A or B
Aging: C or D
10 Hz
-100 dBc/Hz
-120 dBc/Hz
100 Hz
-135 dBc/Hz
-140 dBc/Hz
1 kHz
-145 dBc/Hz
-145 dBc/Hz
10 kHz
-150 dBc/Hz
-150 dBc/Hz
50 kHz
-150 dBc/Hz
-150 dBc/Hz
2 x 10-9 per % change in supply (with Aging
A
or
B)
5 x 10-10 per % change in supply (with Aging
C
or
D)
With Aging:
A or B
Aging: C or D
-6
: 6 minutes 1 x 10
-6
: 2 minutes
1 x 10
1 x 10
-7
: 8 minutes 1 x 10
-7
: 2.5 minutes
3 x 10
-8
: 10 minutes 3 x 10
-8
: 3 minutes
3 x 10
-8
: 30 minutes 1 x 10
-8
: 4 minutes
10 x 10-6 typical range (with Aging
A or B)
2 x 10-6 typical range (with Aging
C
or
D)
Pins for PCB mounting
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • Web: www.vectron.com
46
[Zhongke Bluexun AB32VG1 RISC-V board "runs into" RTT evaluation] Watchdog
[i=s]This post was last edited by xiyue521 on 2021-5-16 01:48[/i]The purpose of the watchdog is to protect the chip from entering an infinite loop (or the program running away). The watchdog has an in...
xiyue521 Domestic Chip Exchange
About initialization problem
I would like to ask what is wrong with my initialization that causes the Bluetooth to not turn on the receiving function and report the error failed:0x48. Specifically, I would like to ask where the p...
千本樱大白 ST - Low Power RF
Cost a few cents to DIY a charger
All the components were purchased from Taobao. As we all know, the Taobao Special Price APP is very suitable for buying these gadgets.MaterialEverything is here. The battery box and 4056 charging boar...
okhxyyo Power technology
EV2400 WIN7 64 BQ20Z45
Win7 64-bit, installed Bq20Z45R1, connected EV2400, the hardware properties show USB input device, can be updated to V0.28 through update. But the software reports an error, can not connect the batter...
qwqwqw2088 Analogue and Mixed Signal
Help
How to connect TST and RST of MSP430F6376 microcontroller? What are they used for?...
曹伟1993 MCU
EEWORLD University ---- QA7: The most important component of the analog world - signal chain and power supply: gate driver
QA7: The most important component of the analog world - signal chain and power supply: gate driver : https://training.eeworld.com.cn/course/67777...
hi5 Integrated technical exchanges

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号