Standard Frequencies – see Page 5 for developed frequencies.
* Check with factory for availability of frequencies not listed.
Applications
Automotive Electronics
Mobile Multimedia/Infotainment
Car Navigation Systems
Internet of Things [IoT, IIot]
Microcontrollers and FPGAs
Wireless Communication
Ethernet/GbE/SyncE
Medical Electronics
Commercial Military & Aerospace
Description
CTS Model SA324 incorporates a low cost, high Q, small size quartz resonator specifically developed to operate
over extended temperature ranges for use in automotive electronics.
Ordering Information
Model
SA324
Frequency Code
[MHz]
XXX or XXXX
Mode of
Oscillation
F
Tolerance
@ +25°C
3
Temperature
Stability
5
Temperature
Range
G
Load
Capacitance
A
Packaging
R
Code
Frequency
Product Frequency Code
1
Code
1
X
2
3
5
Tolerance
±10ppm
±15ppm
±20ppm
±30ppm
±50ppm
Code
I
G
H
N
P
M
Code
X
2
3
5
6
7
Stability
±15ppm
±20ppm
±30ppm
±50ppm
±100ppm
±150ppm
Temp. Range
-40°C to +85°C
2
-40°C to +105°C
3
-40°C to +125°C
4
-40°C to +150°C
5
-55°C to +105°C
5
-55°C to +125°C
5
Packing
Code
3k pcs./reel
R
Code
F
T
Mode
Fundamental
3rd Overtone
Code Capacitance Code Capacitance
7pF
16pF
V
C
8pF
18pF
K
D
9pF
20pF
J
E
10pF
24pF
A
F
12pF
30pF
L
G
13pF
Series
B
S
Notes:
1]
2]
3]
4]
5]
Refer to document 016-1454-0, Frequency Code Tables. 3-digits for frequencies <100MHz, 4-digits for frequencies 100MHz or greater.
Available with all stability codes.
Available with stability codes 3, 5, 6 and 7.
Available with stability codes 5, 6 and 7.
Stability codes 6 and 7. Contact factory for code 5 availability.
Not all performance combinations and frequencies may be available.
Contact your local CTS Representative or CTS Customer Service for availability.
This product is specified for use only in standard commercial applications. Supplier disclaims all express and implied warranties and liability in connection with any use of this
product in any non-commercial applications or in any application that may expose the product to conditions that are outside of the tolerances provided in its specification.
In this RFID module, the platform is based on the 51 single-chip microcomputer for beginners. Let’s summarize what we have gained from writing the code.
Software design of the card reader: It seems ...
[i=s]This post was last edited by sylar^z on 2019-7-30 17:43[/i]This porting of the X-NUCLEO-IKS01A3 sensor driver is based on the STM8S-DISCOVERY development board, using the official en.x-cube-mems1...
sylar^zST Sensors & Low Power Wireless Technology Forum
Dear teachers, after my TMDSEVM572X development board is started using the SD card (it can operate the matrix on the LCD screen), when I use the XDS200 emulator (helloworld project), the following inf...
This article introduces the system burning method of LicheeRV 86 development board
Burning environment construction
First, download the burning software , the address is here: https://dl.sipeed.com/sh...
[i=s]This post was last edited by freebsder on 2020-3-30 22:43[/i]As I said in my previous review , the STM32MP157A SoC is ST's first generation MPU SoC product after all. If we ignore the actual appl...
[i=s]This post was last edited by jinglixixi on 2021-9-3 23:58[/i]OLED screen is a self-luminous display device. It has many types. According to the interface, there are I2C interface and SPI interfac...
Use the multimeter R×1K block, and connect the red and black test leads to the two leads of the self-flashing diode alternately. When one of the measurements is made, the needle first swings to the r...[Details]
The news about "Huawei making cars" has been circulating in the industry for many years. This year, the dust finally settled. The final result is that Huawei will not make cars, but focus on ICT tech...[Details]
There are roughly 3 general timers that need to be configured 1. Time base configuration TIM_TimeBaseStructInit 2. Peripheral output PWM configuration TIM_OCStructInit Generally used to output PWM 3....[Details]
A stepper motor is an electric motor that drives a rotor by gradually changing the direction of an electromagnetic field, thereby achieving rotation. Stepper motors are characterized by precise pos...[Details]
On May 14, BYD released an electric vehicle torque control technology iTAC (intelligence Torque Adaption Control). BYD said that in order to improve the driving performance of electric vehicles whi...[Details]
1 System Hardware Design
The MT500 series touch screen cannot communicate directly with the single-chip microcomputer, but it provides a serial communication interface and a master-slave commun...[Details]
The electromagnetic interference generated by the switching power supply often affects the normal operation of electronic products, so the correct PCB layout of the switching power supply becomes ver...[Details]
Plug-in grid-tied PV inverters are here in Australia – what are they, how do they work, and should you use one?
A PV inverter is an electronic box that converts the direct current (DC) electri...[Details]
In recent years, low dropout regulators (LDO) have been widely used in various
electronic
devices, especially consumer electronics with stringent requirements for power. However, with th...[Details]
"Behind a major safety accident, there are 29 minor faults and about 300 signs or hidden dangers of accidents." Every accident has a cause and signs. If it is discovered and controlled in time, the s...[Details]
The power amplifier makes a loud current noise. What is wrong?
You must first distinguish where the current sound comes from, whether it is generated by the computer, the audio cable, or the s...[Details]
When Qishan County meets photovoltaics, Qishan will have bluer skies, clearer water and a more beautiful environment! When photovoltaic systems meet micro inverters, this 21.84kW project in Qishan,...[Details]
Foreign media have obtained a batch of new information about Samsung Galaxy S11. If you are interested, you may wish to read on. According to reports, the Galaxy S11 will be available in blue...[Details]
According to industry sources, Samsung Electronics is in-depth discussions on plans to acquire part of Continental Group’s electronics business, including ADAS and displays. If the acquisition is c...[Details]
In the design of active filters, the transfer function of high-order filters can be decomposed into the product of first-order and multiple second-order transfer functions. The first-order transfe...[Details]