2381 662 95.../PTCHP12S...HYE
Vishay BCcomponents
PTC Thermistors For Heating Application
FEATURES
•
Ag-metallization suitable for clamping
•
Self-regulating surface temperature at voltages
from 90 V
AC
up to 265 V
AC
•
Self-protecting against over-heating due to PTC
effect
•
Compliant to RoHS directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
QUICK REFERENCE DATA
PARAMETER
Resistance value at 25 °C
Tolerance on
R
25
Rated voltage
Maximum voltage
Operating temperature range
Climatic category
VALUE
1200
Ω
± 35 %
230 V
AC
265 V
AC
- 40 °C to 85 °C
40/155/56
DESCRIPTION
These directly heated thermistors have a positive
temperature coefficient and are primarly intended as heating
element.
APPLICATIONS
Home appliances (thermal actuators, warming plates,
evaporators,
insecticide
and
perfume
vaporizers,
fan-heaters).
ELECTRICAL DATA AND ORDERING INFORMATION
R
25
(Ω)
1200
1200
1200
1200
1200
T
switch
(°C)
50
90
110
130
150
T
surf (1)
at 230 V
AC
(°C)
100
125
140
160
180
12NC
2381 662 95051
2381 662 95091
2381 662 95111
2381 662 95131
2381 662 95151
SAP CODING
PTCHP12S050HYE
PTCHP12S090HYE
PTCHP12S110HYE
PTCHP12S130HYE
PTCHP12S150HYE
Note
(1)
Measured in a low thermal load set-up with the ceramic clamped between a 4 mm diameter stainless steel surface temperature probe on one
side in the center of the metallized surface and 4 mm spring loaded round contact at the other side.
DIMENSIONS
in millimeters
D
T
D
T
11.8 ± 0.2
2.0 ± 0.2
www.vishay.com
15
For technical questions, contact:
nlr@vishay.com
Document Number: 29093
Revision: 11-May-10
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
1
Document Number: 91000
Embedded System
京公网安备 11010802033920号
EEWORLD
