Questions: Hardware and software access USB RAM buffer at the same time, causing data to be messed up or lost.The process of causing garbled code:1. Software sets USB Valid2. Turn off the general inte...
[i=s] This post was last edited by shaorc on 2019-4-22 16:54 [/i] [Ask if you don't understand] As shown in the figure below, I used AD2018 to draw a device of SOT23-3 package type. After drawing it, ...
I came into contact with the TM4C123GXL LAUNCHPAD not long ago. When I got this board, I started to create a project on CCS. As a result, the projects I created using many methods on the Internet all ...
Because the via size used in PCB has always been 0.3/0.5 or 0.4/0.6, and the outer diameter is usually 0.2 or more larger than the hole diameter. As a result, I found that the via used by my new colle...
This book is divided into four parts:Part 1, Analog System DesignPart 2, STM32 Application System DesignPart 3, Modern Digital (FPGA) System DesignPart 4, Integrated System DesignFor the specific cont...
[i=s]This post was last edited by nich20xx on 2020-5-31 05:33[/i]1 Introduction
The STM32F407xx and STM32F10XXX series maintain a relatively similar compatibility mode. All functional pins are pin-to-...