EEWORLDEEWORLDEEWORLD

Part Number

Search

SST25VF032B-66-4I-QF

Description
32 Mbit SPI Serial Flash
File Size710KB,28 Pages
ManufacturerSST
Websitehttp://www.ssti.com
Download Datasheet Compare View All

SST25VF032B-66-4I-QF Overview

32 Mbit SPI Serial Flash

32 Mbit SPI Serial Flash
SST25VF032B
SST25VF032B32Mb Serial Peripheral Interface (SPI) flash memory
Data Sheet
FEATURES:
• Single Voltage Read and Write Operations
– 2.7-3.6V
• Serial Interface Architecture
– SPI Compatible: Mode 0 and Mode 3
• High Speed Clock Frequency
– 80 MHz Max
• Superior Reliability
– Endurance: 100,000 Cycles (typical)
– Greater than 100 years Data Retention
• Low Power Consumption:
– Active Read Current: 10 mA (typical)
– Standby Current: 5 µA (typical)
• Flexible Erase Capability
– Uniform 4 KByte sectors
– Uniform 32 KByte overlay blocks
– Uniform 64 KByte overlay blocks
• Fast Erase and Byte-Program:
– Chip-Erase Time: 35 ms (typical)
– Sector-/Block-Erase Time: 18 ms (typical)
– Byte-Program Time: 7 µs (typical)
• Auto Address Increment (AAI) Word Programming
– Decrease total chip programming time over
Byte-Program operations
• End-of-Write Detection
– Software polling the BUSY bit in Status Register
– Busy Status readout on SO pin
• Hold Pin (HOLD#)
– Suspends a serial sequence to the memory
without deselecting the device
• Write Protection (WP#)
– Enables/Disables the Lock-Down function of the
status register
• Software Write Protection
– Write protection through Block-Protection bits in
status register
• Temperature Range
– Industrial: -40°C to +85°C
• Packages Available
– 8-lead SOIC (200 mils)
– 8-contact WSON (5 X 6 mm)
• All devices are RoHS compliant
PRODUCT DESCRIPTION
The SST 25 series Serial Flash family features a four-wire,
SPI-compatible interface that allows for a low pin-count
package which occupies less board space and ultimately
lowers total system costs. SST25VF032B SPI serial flash
memories are manufactured with SST’s proprietary, high-
performance CMOS SuperFlash technology. The split-gate
cell design and thick-oxide tunneling injector attain better
reliability and manufacturability compared with alternate
approaches.
The SST25VF032B devices significantly improve perfor-
mance and reliability, while lowering power consumption.
The devices write (Program or Erase) with a single power
supply of 2.7-3.6V for SST25VF032B. The total energy
consumed is a function of the applied voltage, current, and
time of application. Since for any given voltage range, the
SuperFlash technology uses less current to program and
has a shorter erase time, the total energy consumed during
any Erase or Program operation is less than alternative
flash memory technologies.
The SST25VF032B device is offered in 8-lead SOIC (200
mils) and 8-contact WSON packages. See Figure 2 for pin
assignments.
©2009 Silicon Storage Technology, Inc.
S71327-03-000
05/09
1
The SST logo and SuperFlash are registered Trademarks of Silicon Storage Technology, Inc.
These specifications are subject to change without notice.

SST25VF032B-66-4I-QF Related Products

SST25VF032B-66-4I-QF SST25VF032B-66-4I-QE SST25VF032B-66-4I-S2E SST25VF032B-66-4I-S2F SST25VF032B-88-4I-QE SST25VF032B-88-4I-QF SST25VF032B-88-4I-S2E SST25VF032B-88-4I-S2F SST25VF032B_10
Description 32 Mbit SPI Serial Flash 32 Mbit SPI Serial Flash 32 Mbit SPI Serial Flash 32 Mbit SPI Serial Flash 32 Mbit SPI Serial Flash 32 Mbit SPI Serial Flash 32 Mbit SPI Serial Flash 32 Mbit SPI Serial Flash 32 Mbit SPI Serial Flash
GPIO pin multiplexing in C6455
In addition, when using GPIO, you also need to consider the pin reuse of the corresponding chip. Taking 6455 as an example, the GPIO pin reuse is as shown in the figure below:It can be seen that most ...
火辣西米秀 DSP and ARM Processors
[ESK32-360 Review] Potentiometer controls USB camera image brightness
The routines in the ESK32-360 software package are very complete. I didn't expect that there are also routines for USB cameras. I have never played with USB cameras before, because I have never seen t...
littleshrimp Domestic Chip Exchange
PIC CCS C language program examples
#include #fuses HS,NOWDT,NOPROTECT#use delay(clock=20000000)#use rs232(baud=9600, xmit=PIN_C6, rcv=PIN_C7) // Jumpers: 8 to 11, 7 to 12#include #byte port_b = 6#define FOUR_PHASE TRUE#ifdef FOUR_PHASE...
rain Microchip MCU
Discussion on the practical ability of silicone pads
By the way, silicone pads can be purchased according to the device package, and the appearance and screw holes are ready. When we bought a whole roll of silicone pads, there was no problem in cutting ...
呜呼哀哉 Analog electronics
The pitfalls of HC32L110 series burning
The following is mentioned in the Rev2.5 (new) version of the HuaDa HC32L110 series data sheet:1. It is actually tested that the old version cannot be programmed with UART and CCID through the P31 and...
白虎姐 Domestic Chip Exchange
Segment LCD, how to light up the desired part
I use iic communication, and the timing is already written. Is there any big guy who can give me some advice?...
一百年后的自己 Analog electronics

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号