The Simplex MFM Fibre Optic range has been specifically designed to operate in Harsh Environments.
The rugged, anti-vibration, corrosion resistant design ensures high environmental and optical
performance in a variety of applications in the air, on land, and above / below sea.
Key Features are:
•
•
•
•
•
•
•
•
Ceramic PC ferrule and alignment sleeve providing optimum performance for
Multimode and Singlemode
Lightweight, minimal panel footprint
Anti-vibration coupling mechanism
Keyed shells and ferrules for optimum repeatability.
Environmentally sealed
Keyway polarisation.
RFI Receptacle gasket
Manufactured in ARCAP for corrosion resistance.
Amphenol
MFM Series – Singleway Fibre Optic
Technical Information
MFM Series – Singleway Fibre Optic
Performance
Optical
Attenuation
Repeatability
Fibre types
Cable types
Typically 0.25 with 62.5/125 cable
<0.1dB
9/125 50/125 62.5/125
100/140 200/280
-001 50/125 or 62.5/125 2.75mm OD
-002 50/125 or 62.5/125 6.2mm OD
-003 50/125 or 62.5/125 2.75mm OD
-004 200/280 2.5mm OD EFA Spec
-005 100/140 1.6mm OD
-006 9/125 2.75mm OD
-007 8/125 6.mm2 OD
-008 50/125 or 62.5/125 2.75mm TJ
-017 50/125 or 62.5/125 5.4mm OD
-039 50/125 or 62.5/125 1.6mm OD
-054 50/125 or 62.5/125 1.8mm OD
Many other cable types are available - contact factory for details
Termination method
Environmental
Temperature range
Temperature Endurance
Gunfire Vibration
Shock
Salt Mist
Sand & Dust
Humidity
Note: Tests based on -001 variant
-65
º
C to +155
º
C
1000hrs @ 150
ºC
as per EN2591 Test FC1 C1 Method B
Ruggedised
Ruggedised
Loose Tube
Ruggedised
Ruggedised
Ruggedised
Ruggedised
Santaprene boot
-7 Crimp ferrule and
heatshrink
Ruggedised
Ruggedised
Epoxy/polish
As per pr EN2519 Test D3 Method A
As per EN2591 Test FD2 D2 Method A
500hrs as per EN2591 Test FC7 C7
As per EN2591 Test C8
95% RH for 6hrs as per EN2591 C21
Mechanical
Durability
Materials
>500 matings
Shell
Ferrule
Alignment Sleeve
‘O' ring (seals)
Boot
ARCAP
PC Zirconia ceramic
Zirconia ceramic
Silicone
Silicone
Amphenol
MFM Series – Singleway Fibre Optic
Part Number Information
MFMXXEX
Series
00 Square Flange Receptacle
01 Free Receptacle
06 Plug
07 Jam Nut Receptacle
20 2-Hole Fixing Receptacle
-
XXX
Cable Variant
See Previous Page
Orientation
N, A, B, C, D, E, U
Connector Sub-Assembly
MFMXX
Series
21 2-Hole Fixing Receptacle
29 Square Flange Receptacle
39 Plug
69 Jam Nut Receptacle
79 Free Receptacle
-
EX
Orientation
N, A, B, C, D, E, U
Ferrule Sub-Assembly
MFMXX
Series
09 All Receptacles
19 Plug
-
XXX
Cable Variant
See previous page
Protective Caps
960-164-1000
960-164-1007
960-194-1000
Receptacle
Receptacle
Plug
Small 3.7mm Eyelet
Large 14.8mm Eyelet
Large 11.5mm Eyelet
Termination tools and Consumables
Basic termination kit
Add on kit
Consumable pack (50 terminations approximately)
Torque Fixture
927 - 100 - 3000
927 - 100 - 3500
927 - 100 - 6000
927-1174
Other items of tooling may be purchased separately, please contact your Distributor for details
Torque Settings
MFM Plug
MFM Receptacle (All)
MFM Jam Nut Receptacle
Rear Nut
Ferrule Assembly
Panel Nut
15 lbf/in
15 lbf/in
33 lbf/in
Notice: Products are sold subject to Amphenol’s conditions of sale (“the standard conditions.”) All specifications and statements contained herein are believed to be correct at
the time of printing but no representation or warranty, express or implied, is given as to any specification or statement contained herein. Product specifications including
performance characteristics are typical only and subject to deviation. Specifications are also subject to change without notice. Users should not assume that all safety measures
are indicated or that other measures may not be required. No representation or warranty, express or implied, is given that any use of products (including any stated or suggested
use) does not infringe any patent, registered design or other third party rights and no stated or suggested use of products can be taken to recommend any such infringement.
[i=s]This post was last edited by donghailao on 2021-11-24 18:04[/i]In order to train students' creative thinking, the teacher gave a thinking question....
A simple square wave signal generator that can adjust the frequency with one button. The LED lights up when the frequency is out of range. The frequency range is 100-1000hz.
#include reg52.hsbit PWMOU...
In this example, P2.0 and P2.1 of MSP430fr6989 are selected as serial ports UCA0TXD and UCA0RXD; (There is not much code, mainly for register operations, and it is written in the main.c file in a hurr...
After getting the RISC-V core development board sent by EEWORLD, I first did an experiment to light up the LED. It was basically smooth and I could see the LED flashing normally. This shows that the c...
1. Data input stage1. Whether the data received in the process is complete (including: schematic diagram, *.brd file, bill of materials, PCB design instructions and PCB design or change requirements, ...
I just got a chip. For commonly used chips, you can refer to the routines on the Internet for in-depth understanding. For an uncommon chip, the Datasheet is almost the only information for using the c...
One UI 3.0 has been pushed to multiple Galaxy phones, including the Galaxy S20 series, Galaxy Note 20 series, and even last year's Galaxy Note 10 and Note 10+. No major bugs or problems were found wi...[Details]
Although chiplets (small chips or core particles) are sought after by the industry and academia, they were previously only a "game for a few people". But with the birth of the UCIe industry alliance,...[Details]
High voltage differential probes are mainly used to observe differential signals. It is an oscilloscope probe designed using the principle of differential amplification; the principle of differenti...[Details]
Samsung Electronics' chipmaking equipment subsidiary Semes said on Friday that its revenue for the full year 2021 was 3.12 trillion won and its operating profit was 353.3 billion won, TheElec reporte...[Details]
There are two kinds of electric current in nature, direct current and alternating current.
The two types of current have their own characteristics and applications. In terms of power transport...[Details]
When using a mixed-signal oscilloscope, you may encounter problems related to detection. These problems fall into two categories: probe loading and probe grounding. Probe loading problems often aff...[Details]
Huawei recently exhibited a series of sensors for autonomous driving, including binocular cameras, millimeter-wave radars, and lidars. This time we will first decrypt Huawei's lidar, and next time we...[Details]
National Energy Comprehensive New Energy No. 106
Energy Bureaus of all provinces (autonomous regions, municipalities directly under the Central Government), Development and Reform Commissions...[Details]
In today's society, with the continuous progress of science and technology, more and more modern medical devices have been rapidly developed, especially electronic instruments that are in direct conta...[Details]
1) Electrical isolation
When the floating ground potential of the driving circuit is different from the source potential of the driven switch tube, the driving method should be potential isola...[Details]
Introduction
Digital antenna array is the product of the combination of antenna and digital signal processing technology. It has many advantages such as flexible working mode, excellent anti-in...[Details]
STC89C52RC is a low-power, high-performance CMOS 8-bit microcontroller produced by STC Company, with 8K bytes of system programmable Flash memory. STC89C52 uses the classic MCS-51 core, but has made...[Details]
Hardware platform: iTOP-4412 development board Project name: Image recognition project In this article, we will learn to use QT to build a graphical interface and use QT to call Baidu AI's inter...[Details]
I started learning PIC microcontrollers with the MPLAB HI-TECH compiler. Recently, I found out that PIC had already launched compilers such as MPLAB X and XC8 a few years ago. I think it’s better t...[Details]
Switching Power Supply Study Group
京公网安备 11010802033920号
EEWORLD
