The JDSU near infrared fused coupler splits or combines light at any selected
wavelength from 700 to 1150 nm. Designed for applications in fiber laser, sensor
and avionics applications, the coupler utilizes low loss fused fiber technology. No
light leaves the fiber and therefore no alignment is required; and there are no
unwanted reflections. Furthermore the output fiber pigtails may be directly
integrated into beam delivery systems.
NORTH AMERICA
:
800 498-JDSU (5378)
WORLDWIDE
:
+800 5378-JDSU
WEBSITE
:
www.jdsu.com
FUSED COUPLER, NEAR INFRARED
2
Configuration
1x2
P1 (Red) COMMON (Input)
P2 (Blue) SIGNAL (Input)
P3 (Red) TAP (Output)
2x2
P1 (Red) COMMON (Input)
P2 (Blue) SIGNAL (Input)
P4 (Blue)
P3 (Red) TAP (Output)
Insertion Loss
Coupling Ratio
Grade
Available Housing Option
Signal Path Insertion Loss
1, 2
(Maximum)
0.9 dB
1.1 dB
1.5 dB
1.7 dB
2.2 dB
2.4 dB
3.0 dB
3.2 dB
3.8 dB
4.0 dB
Tap Path Insertion Loss
1, 2
(Maximum)
12.2 dB
12.4 dB
8.4 dB
8.6 dB
6.4 dB
6.5 dB
4.9 dB
5.1 dB
3.8 dB
4.0 dB
10%
10%
20%
20%
30%
30%
40%
40%
50%
50%
A
B
A
B
A
B
A
B
A
B
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
3, 4, 5, 6
1. Insertion loss at operating wavelength range (not including PDL, TDL or connector losses).
2. In 2x2 couplers with a coupling ratio of 20% or lower, insertion loss is not specified for launch through second input port (P4).
FUSED COUPLER, NEAR INFRARED
3
Housing Option
Housing Code
3
4
5
6
Description
Regular
Ø 0.9 mm slim
Ø 0.9 mm semi-ruggedized
Ø 3.0 mm fully ruggedized
1x2, 2x2 Dimensions (mm)
3.0 (Ø) x 50 (L)
3.0 (Ø) x 60 (L)
5.0 (Ø) x 75 (L)
80 (L) x 10 (W) x 8 (H)
Pigtail
Primary-coated fiber
Ø 0.9 mm loose-tube
Ø 0.9 mm loose-tube
Ø 3.0 mm fan-out sleeving
Specifications
Parameter
Operating wavelength range
1
Excess loss
Return loss/Directivity
Pigtail tensile load
Optical power handling
Operating temperature range
2
Storage temperature range
Fiber type
Grade A
Grade B
Typical
Minimum
Maximum
Maximum
Any wavelength within the 700 to 1150 nm range
0.30 dB
0.50 dB
50 dB
5N
4W
-40 to 75 °C
-40 to 85 °C
Speciality fiber
1. Any specific wavelength point from within the range 633 to 850 nm may be selected. For wavelengths outside of this range, contact JDSU with specific requirements.
2. For connectorised component, operating temperature range is -5 to 75 °C.
FUSED COUPLER, NEAR INFRARED
4
Ordering Information
For more information on this or other products and their availability, please contact your local JDSU account manager or
JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at
customer.service@jdsu.com.
Sample: FFS-060K31A10 (Fused Fiber Speciality Coupler, 1060 nm, 50/50 coupling ratio, regular housing, 1x2, A grade, 1 m
pigtails, no connectors)
FFS-
Code
7
8
9
0
1
Wavelength
(First Digit)
7xx nm
8xx nm
9xx nm
10xx nm
11xx nm
Code
A
C
E
H
K
Coupling Ratio
1
10%
20%
30%
40%
50%
Code
1
2
Configuration
1x2
2x2
Code
0
1
3
5
9
A
B
Connectors
2, 4
None
FC/PC
FC/APC
SC/APC
FC/UPC
SC/UPC
LC
5
Code
A
B
Grade
Grade A
Grade B
Code
Wavelength
(Second and
Third Digit)
Examples:
33
x33 nm
32
x32 nm
57
x57 nm
Code
3
4
5
6
Housing
2
Regular
Ø 0.9 mm slim
Ø 0.9 mm
semi-ruggedised
Ø 3.0mm fully
ruggedised
Code
0
1
Pigtail Length
3
(Minimum)
0.5 meter
1 meter
1. Other coupling ratio are available. Please contact JDSU for ordering codes of coupling ratios not listed.
2. Connectors may be fitted to housing types 4, 5 and 6. For connectorisation of housing type 3, please contact JDSU sales office.
3. Minimum pigtail length. Other pigtail lengths are available on request. When the pigtail has been modified to include a
connector, pigtail length measurment includes the connector end face.
4. Excess Loss in specification table does not include connector losses.
5. LC connector is not available for housing code 6, fully ruggedised housing.
LC is a registered trademark of Lucent Technologies.
The story begins whenyoung application engineer Neubean wants to prove through an experiment whether it is really necessary to put a 100 Ω resistor in front of the MOSFET gate in order to obtain stabi...
[i=s]This post was last edited by qwqwqw2088 on 2022-7-7 14:04[/i]In order to meet the needs of smaller solution size and reduce system cost, miniaturization and high power density have become the dev...
[i=s]This post was last edited by jinglixixi on 2021-9-24 23:12[/i]The environment is an important condition for our survival, so it is necessary to understand it. Due to time constraints, only the te...
[i=s]This post was last edited by gao_hex on 2021-3-22 12:04[/i]Pico UnboxingData Preparation
First time writing an unboxing article1. Related MaterialsPico Chinese official website: https://pico.org....
It is often necessary to detect buttons in circuits. In practical experience, do you think it is better to scan buttons regularly in software or to set the GPIO ports related to buttons as interrupts ...
On August 17, the US Department of Commerce announced that it would further tighten restrictions on Huawei and its affiliates' use of US technology and software, and added 38 new related companies to...[Details]
What is a stack: Baidu says: A stack is a special linear list that only allows insertion or deletion operations at one end of the list. The end of the table that allows insertion and deletion opera...[Details]
In the last class, we mentioned the internal structure of a "quasi-bidirectional IO" of the microcontroller IO port. In fact, our microcontroller IO port has three other states, namely open drain, pu...[Details]
On July 31, 2020 ChinaJoy opened grandly at the Shanghai New International Expo Center. Qualcomm once again joined hands with industry ecosystem partners to name the theme pavilion with the Qualcomm ...[Details]
0 Preface
Satellite applications have provided all-weather, all-day, high-precision positioning and monitoring services for various military and civilian carriers on land, sea and air in my ...[Details]
The positive poles of the 8 LEDs are connected to the positive pole of the power supply through a 1 kilo-ohm current-limiting resistor, and the negative poles are connected to the microcontroller con...[Details]
Reference: "STM32F4xx Chinese Reference Manual" System Configuration Controller and Interrupts and Events chapters. EXTI(External interrupt /evet controller) Those who have come into contact with...[Details]
Samsung launched a recycling program to bring in older smartphone models back in 2015. However, a recent infographic shared by the company shows that the program has only managed to bring in 0.0019% ...[Details]
If I were to summarize which technology has had the greatest impact on human life in the past 50 years, it would definitely be computer technology. After 50 years of development, computers have now pe...[Details]
On May 28-29, TÜV Rheinland successfully held its first offline photovoltaic and energy storage component seminar in 2020 at Crowne Plaza Suzhou. The seminar focused on the latest standards and marke...[Details]
In the early telecommunication rooms, the 220V AC power supply was usually rectified to charge the 48V battery pack, which then directly powered the program-controlled switches. With the applicat...[Details]
Kwon Hyuk-man, executive vice president of Samsung System LSI, said at the earnings conference: "We are promoting the return of Exynos to the Galaxy series flagship phones." Samsung Electronics anno...[Details]
Securities Times e-company news: Recently, there have been market rumors that the world-renowned open source chip foundation RISC-V has decided to change its registered place from the United States t...[Details]
Recently, there has been shocking news in the global autonomous driving field: Argo AI, an autonomous driving technology company that once received $1 billion from Ford, may be about to collapse....[Details]
As a late-stage "lazy cancer" editor, whenever I am advised to take a driver's license test, I always say with great pride: No need to learn, technology is so advanced, it won't be long before autono...[Details]
Analogue and Mixed Signal
京公网安备 11010802033920号
EEWORLD
