SaRonix
Crystal Clock Oscillator
Technical Data
Frequency Range:
Frequency Stability:
7 MHz to 250 MHz
±20, ±25, ±50 or ±100 ppm over all conditions: calibration tolerance,
operating temperature, input voltage change, load change, aging,
shock and vibration.
3.3 & 5V, High Frequency, ECL
SEL2400 / SEL3400 Series
Temperature Range:
Operating:
Storage:
Supply Voltage:
Supply Current:
SEL34xx:
SEL24xx:
ACTUAL SIZE
0 to +70°C or -40 to +85°C
-55 to +125°C
5.0V or -5.2V, 3.3V PECL
70mA typ, 100mA max, 75mA max @ 3.3V
48mA typ, 80mA max, 65mA max @ 3.3V
Output Drive:
Symmetry:
Rise & Fall Times:
Logic 0:
Logic 1:
Load:
Jitter:
Mechanical:
Shock:
Solderability:
Terminal Strength:
Vibration:
Solvent Resistance:
Resistance to Soldering Heat:
Environmental:
Gross Leak Test:
Fine Leak Test:
Thermal Shock:
Moisture Resistance:
Part Numbering Guide
MIL-STD-883, Method 2002, Condition B
MIL-STD-883, Method 2003
MIL-STD-202, Method 211, Conditions A & C
MIL-STD-883, Method 2007, Condition A
MIL-STD-202, Method 215
MIL-STD-202, Method 210, Condition A, B or C
( I or J for Gull Wing on SEL34xx )
45/55% max @ V
BB
or Complementary Outputs Crossing
1ns typ, 3ns max 20% to 80% for 10KH Logic
350ps typ, 550ps max 20% to 80% for 10KE Logic
V
CC
-1.595 max, 0 to +70°C
V
CC
-1.595 max, -40 to +85°C
V
CC
-1.02 min, 0 to +70°C
V
CC
-1.08 min, -40 to +85°C
50Ω to V
CC
-2V
3.5ps max RMS period jitter, 1ps max 1σ cycle-to-cycle jitter
Description
A crystal controlled, high frequency,
highly stable oscillator, compatible with
Motorola 10KH,10KE or 100LVE logic
families. SaRonix proprietary fundamen-
tal high frequency sealed crystals avail-
able for exceptional stability and reliabil-
ity. The output can be disabled and wired-
OR for testing or combining multiple
clocks. Open emitter output allows the
user to select the load termination to
optimize performance. Complementary
outputs are available.*
Applications & Features
• Frequencies up to 250 MHz including
SONET/ATM/SDH 155.52 MHz
• Gigabit Ethernet
• Fibre Channel Hubs/Routers
• Ideal for high resolution graphics &
imaging applications
• Provides 10KH and 10KE (Motorola
ECLinPS) compatible outputs
• 3.3V PECL versions are LVDS com-
patible
• Disable/wired-OR output feature and
complementary output are available
• Superior stability with AT-cut crystal
performance compared to SAW tech-
nology
• Fundamental or overtone crystal op-
eration results in superior jitter charac-
teristics over PLL implementations
• Standard 0.200" high package
• Surface mountable gull wing version
available
MIL-STD-883,
MIL-STD-883,
MIL-STD-883,
MIL-STD-883,
Method
Method
Method
Method
1014, Condition C
1014, Condition A2
1011, Condition A
1004
SEL
Series
ECL/PECL
340
0 B
- 250.0000
Frequency (MHz)
K = Gull Wing Package
SEL24x/34x series only,
not applicable to SEL35x series
Stability Tolerance
AA = ±20 ppm, 0 to +70°C
A = ±25 ppm, 0 to +70°C
B = ±50 ppm, 0 to +70°C
C = ±100 ppm, 0 to +70°C
E = ±50 ppm, -40 to +85°C
F = ±100 ppm, -40 to +85°C
Pin 1 Function
(See Table I)
0 = Pin 1 - Control
1 = Pin 1 - Q Complementary
2 = Pin 1 - No Connect
DS-116
REV G
Device Type
241 = open blank, +5V 10KH, 7 to 200 MHz
243 = open blank, +3.3V 10KE, 25 to 200 MHz
340 = double seal, +5V 10KE, 70 to 250 MHz
341 = double seal, +5V 10KH, 70 to 250 MHz
343 = double seal,+3.3V 10KE, 70 to 155.52 MHz
350 = double seal, -5.2V 10KE, 70 to 250 MHz
351 = double seal, -5.2V 10KH, 70 to 250 MHz
353 = double seal, -3.3V 10KE, 70 to 155.52 MHz
*
For internal termination contact factory.
SaRonix
141 Jefferson Drive • Menlo Park, CA 94025 • USA • 650-470-7700 • 800-227-8974 • Fax 650-462-9894