EEWORLDEEWORLDEEWORLD

Part Number

Search

PH1-7S2FC4282

Description
Transponder, 10709Mbps(Tx), 10709Mbps(Rx), FC/UPC Connector,
CategoryWireless rf/communication    Optical fiber   
File Size240KB,6 Pages
ManufacturerJDS Uniphase Corporation ( VIAVI )
Websitehttp://www.jdsu.com/index.html
Download Datasheet Parametric View All

PH1-7S2FC4282 Overview

Transponder, 10709Mbps(Tx), 10709Mbps(Rx), FC/UPC Connector,

PH1-7S2FC4282 Parametric

Parameter NameAttribute value
MakerJDS Uniphase Corporation ( VIAVI )
Reach Compliance Codeunknown
Other featuresIT ALSO OPERATE FROM 1280NM TO 1600NM
body height13.2 mm
Body length or diameter84.1 mm
Communication standardsGR-253
Connection TypeFC/UPC CONNECTOR
Data rate (receive)10709 Mbps
Data rate (send)10709 Mbps
Fiber optic equipment typesTRANSCEIVER, TRANSPONDER
Nominal operating wavelength1562 nm
Nominal optical power output0.562 mW
minimum return loss-27 dB
COMMUNICATIONS MODULES & SUBSYSTEMS
10 Gb/s TDM/DWDM 300 Pin SFF MSA SR2/IR2/LR2 Transponder
PH1 Series
Key Features
• Three configurations supporting SR2/IR2/LR2 applications
• Supports dense wavelength division multiplexing
(DWDM) applications (without wavelocker)
• Microprocessor controls to support I2C
• Integrated 16:1/1:16 mux/demux
• Small form factor package (2.2" x 3.0" x 0.53") for high
density applications
• Low power consumption: 4.8 W typical, 6.8 W maximum
for TDM applications
• 70 °C maximum operating temperature
• High sensitivity PIN or APD receivers
• SONET, FEC, Ethernet and Multirate Capable Versions
• Forward, counter and line timing clocking modes
Applications
Telecommunications
Metropolitan Area Networks
Subscriber loop
Intra-office SONET/SDH
High bit-rate data communications
JDSU 10 Gb/s PH1 Series transponders are intended for 1550 nm system
applications with reaches of up to 80 km. The series includes three different
transponders for SR2 (25 km), IR2 (40 km), and LR2 (80 km) TDM or DWDM
applications. Each transponder accepts 16 bits of parallel digital data and converts
it to a 10 Gb/s NRZ modulated optical signal. It also accepts a 10 Gb/s NRZ
modulated optical signal and converts it into 16 bit wide parallel digital data.
The PH1 series offers low DC power dissipation and is available in either a small
form factor package (2.2 x 3 x 0.53 inches) or in a larger footprint (3.5 x 4.5 x 0.53
inches) package, depending on system thermal performance requirements. The
transmit design uses an Electro-Absorptive Modulated Laser (EML) which,
depending on the configuration, produces an average output power of between
-4 dBm to 2 dBm (EOL). A PIN (-17 dBm typical sensitivity) or APD (-24 dBm
typical sensitivity) receiver is available, based on system configurations.
JDSU PH1 Series transponders are designed to support the following data rates:
9.953 Gb/s (SONET), 10.3125 Gb/s (Ethernet), 10.664 Gb/s (FEC Encoded),
10.709 Gb/s FEC, or 11.09 Gb/s EFEC. They meet all applicable SONET/SDH standards.
Compliance
• Telcordia GR-253-Core
NORTH AMERICA
:
800 498-JDSU (5378)
WORLDWIDE
:
+800 5378-JDSU
WEBSITE
:
www.jdsu.com
Reading Notes of the Good Book "Electronic Engineer Self-Study Handbook" 01-Receiving & Title Page
[i=s]This post was last edited by qi777ji on 2021-8-9 14:11[/i]I finally received this book today. Thank you EEWORLD for giving me the opportunity to read this book! Nowadays, fewer and fewer people b...
qi777ji Analog electronics
The main features of embedded C and the similarities and differences between embedded C and standard C
Embedded C has developed rapidly and has become one of the most popular languages, mainly because of its powerful functions. The advantages of embedded C can be further demonstrated by adding some ass...
Aguilera Microcontroller MCU
Should I use a larger capacitor or a smaller capacitor first? --DC-DC power module output
[i=s]This post was last edited by Baboerben on 2020-10-25 16:48[/i]The best information is the design guide of the capacitor manufacturer:1. The simple equivalent model of the capacitor is C+ESL+ESR2....
灞波儿奔 Analogue and Mixed Signal
Based on PSOC6 development board simulation I2C solution X-NUCLEO-IKS01A3 HTS221
Last time we have verified that I2C can run correctly. Since HTS221 and STTS751 are connected to the same I2C BUS, we can use the same i2c program to read them in time-division multiplexing mode. The ...
DavidZH MEMS sensors
50 ways to use TI CC6678 digital signal processor (DSP)
An 8-core C66x DSP is particularly interesting because it was one of the first high-performance multicore DSPs on the market. While over 100 customers have adopted the C6678 DSP in their products, I c...
Aguilera Microcontroller MCU
Calculation Problem of Quality Factor of Low-pass Filter Circuit
As shown in the figure, it is a screenshot from a post by gmchen on active filters and low-pass filters. For the second-order low-pass filter circuit shown in the figure, how is the quality factor Q i...
shaorc Analog electronics

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号