A brings Illumination Grade LED light sources to the lighting market. It has never been simpler
to design LED solutions and bring them to market. With hot testing and color binning, every LUXEON A
is tested and specified at real world operating conditions, Tj 85°C. With
Freedom From Binning,
every
LUXEON A LED falls within a single 3 step MacAdam ellipse centered on the black body curve and now,
luminaire manufacturers can be confident in color consistency from LED to LED. There’s never been a
more supportable and consistent light emitting diode. The superior quality of light, light output, and real
world efficacy enable leading performance and efficient solution development in a wide variety of segments
including retrofit bulbs, office, hospitality, school, and home lighting.
•
Freedom From Binning
for superior quality of light
•
Hot tested and color binned at Tj 85°C
•
Maximum light output and lowest cost of light
•
Specified color over angle
•
Simplified design and accelerated time to market.
Table of Contents
General Product Information .....................................................................................................................................3
Absolute Maximum Ratings ...................................................................................................................................7
Pad Configuration ................................................................................................................................................10
Solder Pad Design..................................................................................................................................................10
Relative Spectral Distribution vs. Wavelength Characteristics .........................................................................11
Typical Light Output Characteristics over Temperature ....................................................................................14
Typical Forward Current Characteristics ..............................................................................................................15
Current Derating Curves..........................................................................................................................................16
Product Binning and Labeling ...................................................................................................................................22
LUXEON A 3-step MacAdam Ellipse Color Definition ................................................................................24
Forward Voltage Bins ..................................................................................................................................................25
LUXEON A Datasheet DS100 20121215
2
General Product Information
Product Nomenclature
LUXEON A emitters are tested and binned “hot” under conditions comparable to those found in “real-world” lighting products.
The test conditions for LUXEON A are 700 mA D.C. with junction temperature at 85ºC.
The part number designation for the LUXEON A emitters is explained as follows:
L X HA - B C D E
Where:
A — designates minimum CRI performance (value 8 = 80 minimum and value 9 = 90 minimum)
B — designates radiation pattern (value P for Lambertian)
C — designates color (value W = White)
D & E — designates nominal ANSI CCT (value 27 = 2700K, 30 = 3000K, 40 = 4000K and 50 = 5000K)
Therefore products tested and binned at 700 mA follow the part numbering scheme:
L X H x - PW x x
Lumen Maintenance
LUXEON A products are tested in compliance with LM-80. Please visit http://www.philipslumileds.com/support/documentation/lumen-maintenance
or contact your local Philips Lumileds Technical Solutions Manager for TM-21 extrapolations or other support.
Environmental Compliance
Philips Lumileds is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON A is compliant to
the European Union directives on the restriction of hazardous substances in electronic equipment, namely the RoHS and REACH directives.
Philips Lumileds will not intentionally add the following restricted materials to the LUXEON A: lead, mercury, cadmium, hexavalent chromium,
polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE).
LUXEON A Datasheet DS100 20121215
3
Product Selection
Product Selection Guide for LUXEON A Emitters
Junction Temperature = 85°C
Table 1.
Typical Performance Characteristics at 350 mA, 700 mA, and 1000 mA for LUXEON A, Junction Temperature = 85°C
CRI
Part
Number
LXH8-PW27
LXH8-PW30
LXH9-PW30
LXH8-PW40
LXH8-PW50
Nominal
ANSI CCT
2700K
3000K
3000K
4000K
5000K
@ 700 mA
Min.
80
80
90
80
80
Typ.
85
85
95
85
85
Lum Flux (lm)
Min. @
700 mA
140
150
120
160
170
Typ. Lum Flux (lm)
@
350 mA
89
97
75
102
106
@
160
174
135
183
190
@
218
237
184
249
258
700 mA 1000 mA
Typ. Forward Voltage (V
f
)
@
350 mA
2.72
2.72
2.72
2.72
2.72
@
2.81
2.81
2.81
2.81
2.81
@
2.85
2.85
2.85
2.85
2.85
700 mA 1000 mA
Typ. Efficacy (lm/W)
@
93
102
79
107
111
@
81
88
69
93
97
@
76
83
64
87
91
350 mA 700 mA 1000 mA
LUXEON A Datasheet DS100 20121215
4
Optical Characteristics
LUXEON A at Test Current
[1]
Junction Temperature = 85°C
Table 2.
Color Temperature
CCT
Nominal
ANSI CCT
Part
Number
Typical
Typical
Total
Included
Angle
[2]
(degrees)
u
0.90V
Typical
Viewing
Angle
[3]
(degrees)
2u
1/2
120
120
120
120
120
2700K
LXH8-PW27
2725K
160
3000K
LXH8-PW30
3045K
160
3000K
LXH9-PW30
3045K
160
4000K
LXH8-PW40
3985K
160
5000K
LXH8-PW50
5028K
160
Notes for Table 2:
1. Test current is 700 mA D.C. for all LXH8-PWxx emitters.
2. Total angle at which 90% of total luminous flux is captured.
3. Viewing angle is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value.
This tutorial is mainly for the STM32F04x series of microcontrollers. For the clock of the STM32 microcontroller, people who have used STM32 must be more clear. STM32 is a microprocessor based on the ...
Adafruit's CircuitPython has supported SAMD21/D51 microcontrollers for a long time, and now micropython finally supports SAMD series microcontrollers.https://github.com/micropython/micropython/commit/...
I use a queue to let the data buffer enter the queue first and then exit the queue. Finally, I use the serial port to transmit large data, but there is still serious packet loss or serial port jamming...
Global semiconductor equipment spending has entered an upward cycle. The application of new technologies and new products such as 5G, Internet of Things, big data, artificial intelligence, and automo...[Details]
The Belfer Center for Science and International Affairs at Harvard Kennedy School recently released a report pointing out that in addition to becoming a manufacturing powerhouse, China has also becom...[Details]
This article introduces the main features and advantages of PCA9685, block diagram, typical application circuit diagram and LCD backlight application circuit diagram. NXP's PCA9685 is a 16-channel ...[Details]
According to Taiwanese media reports, TSMC has introduced dry extreme ultraviolet (EUV) mask cleaning technology to improve energy and resource efficiency, creating cumulative improved benefits of NT...[Details]
High-efficiency lighting has been a hot topic in recent years. With the elimination of incandescent lamps, compact energy-saving lamps are becoming more and more accepted. According to the Internat...[Details]
Acquired the Bluetooth and wireless LAN module business of TAIYO YUDEN
Kaga Electronics Co., Ltd. (hereinafter referred to as "Kaga Electronics") has acquired the commercial rights, ...[Details]
1 Introduction
As energy depletion and environmental pollution become increasingly serious, countries are increasingly eager for green energy, which has led to unprecedented development of phot...[Details]
Absolute Signal Fidelity An ideal oscilloscope probe should transmit any signal from the probe tip to the oscilloscope input with absolute signal fidelity. In other words, the signal occurring at t...[Details]
On the evening of January 15, Guangdong Gowin Semiconductor Technology Co., Ltd. (hereinafter referred to as Gowin) officially responded to being included in the U.S. Department of Defense's "Militar...[Details]
LeddarTech®, an automotive software company that provides patented and disruptive artificial intelligence low-level sensor fusion and perception software technology for advanced driver assistance sy...[Details]
In single-phase low-power photovoltaic grid-connected systems, there are two topological structures: isolated and non-isolated. The isolated type has many disadvantages such as high cost and large ...[Details]
Multisim11.0 is an excellent simulation software for analog, digital and electronic industries produced by Canadian NI. Its powerful functions made me love it after my first experience. There are all ...[Details]
The working principle of the device application circuit is shown in the figure below. It can be used in corridors and stairways as a delayed energy-saving lighting lamp. Before going upstairs, pres...[Details]
As a sequel to the LED driver introduced in the previous article, the main change is that the function of automatically creating device nodes during driver loading is realized by using the mdev mechan...[Details]
RTI continues to lead the way with cutting-edge cybersecurity processes to minimize vulnerabilities and ensure strong protection for the enterprise.
RTI, a provider of software for i...[Details]
Mobile and portable
京公网安备 11010802033920号
EEWORLD
