GENERAL PURPOSE — SINGLE & DOUBLE POLE
E Series
Features
5 current ratings
Choice of actuator styles
3 terminal types (optional screw
terminals available — consult factory)
3 contact arrangements
Long-life coil spring mechanism
High-temperature 150°C and 200°C
available on select models (consult factory)
Electrical Ratings
Switch
Series
EN61058 Rating
UL1054 Rating
Electrical Life at Rated Load
According to VDE
According to UL
(Min. Operations)
(Min. Operations)
E13/E19
E19A
(mixed ratings)
E14/E25
E20
E28/E29
E30
G13/G20
N/A
N/A
N/A
N/A
N/A
N/A
N/A
15A, 125/250VAC; 3/4HP, 125VAC
1-1/2HP, 250VAC; 2A, 48 VDC
(E13 Only)**
15A, 125/250VAC; 3/4HP, 125VAC; 1-1/2HP, 250VAC
0.1A, 125VAC
25A, 125/250VAC; 1HP, 125VAC
2HP, 250VAC; 2A, 48VDC
(E14 Only)**
20A, 125/250VAC; 1HP, 125VAC
2HP, 250VAC
30.1A, 125/250/277VAC
(UL Approved Only — Resistive Load Only)
30.1A, 125/250VAC; 1HP, 125VAC
2HP, 250VAC
(UL Only)
0.1A, 125VAC
0.1A, 30VDC
(G13 Only)
N/A
N/A
N/A
N/A
N/A
N/A
N/A
6,000*
6,000
6,000
6,000
6,000
6,000
6,000*
*Indicates 100K life available.
**100K Hi-temp not available
Specifications
Electrical
Temperature Rating:
Flammability Rating:
Materials
105°C Std.
(150°C and 200°C optional — E13, E14, E19, E20, G13)
85°C Std.
(E28 and E29),
85°C Std.
(150°C optional) E25
UL94HB
General Purpose Phenolic
Thermoplastic Nylon
Brass
(E13, E19, E19A, G13, G20),
Silver-Plated Brass
(E14, E20),
Silver-Plated Copper (E28, E29, E30)
Brass
(E13, E19, E19A, G13, G20)
Copper
(E14, E20, E28, E29, E30)
Brass
(E13, E19, E19A, G13, G20)
Silver-Plated Beryllium Copper
(E14, E20, E28, E29, E30)
Stainless Steel
Cold-Rolled Steel (Nickel-Plated)
Sintered Stainless Steel
Gold Crosspoint
(G13, G20, E19A)
Silver-Cadmium
Oxide (E13, E14, E19, E19A, E20, E28, E29, E30)
Silver Alloy
(E19A, E29, E30)
Case:
Actuating Button:
Common Terminals:
NO and NC Terminals:
Moving Blade:
Spring:
Auxiliary Actuators:
Roller:
Contacts:
Dimensions
— Single Pole
inches (mm)
Actuators
— Single Pole
Standard type integral hinged lever and
roller actuators are available in choice of
two mounting positions. Actuation lengths
are dimensioned from centerline of switch
mounting hole as shown.
Actuator Specifications
— Single Pole
Series/
Prefix
Actuator
Type
Switch
Type
Maximum Maximum
Operating Pre-Travel
Force
inches
(g)
(mm)
Operating
Point*
inches
(mm)
Minimum Max. Movement Actuation
Over-Travel
Differential
Length**
inches
inches
inches
(mm)
(mm)
(mm)
“J” & “M” Type
Optional Hardware
— Single Pole
Brass Hex Nut
Brass Knurled Nut
Brass Hex Nut
(Nickel-Plated)
Brass Knurled Nut
(Nickel-Plated)
Star Washer
(Lockwasher)
0012-0023
0012-0025
0012-0028
0012-0026
0012-0073
E13/G13
–00E
425
850
425
850
0.050
(1.27)
0.100
(2.54)
0.050
(1.27)
0.100
(2.54)
0.050
(1.27)
0.100
(2.54)
0.250
(6.35)
0.312
(7.93)
0.343
(8.71)
0.525
(13.34)
0.250
(6.35)
0.348
(8.84)
0.403
(10.24)
0.483
(12.27)
0.285±0.020
(7.24±0.51)
0.248±0.026
(6.30±0.66)
0.670±0.030
(17.02±0.76)
0.633±0.030
(16.08±0.76)
0.812±0.030
(20.63±0.76)
0.775±0.030
(19.69±0.76)
0.312±0.062
(7.93±1.57)
0.468±0.062
(11.89±1.57)
0.281±0.062
(7.14±1.57)
0.437±0.062
(11.10±1.57)
0.718±0.062
(18.24±1.57)
0.860±0.062
(21.84±1.57)
0.687±0.062
(17.45±1.57)
0.828±0.062
(21.03±1.57)
0.100
(2.54)
0.050
(1.27)
0.108
(2.74)
0.050
(1.27)
0.218
(5.54)
0.168
(4.27)
0.187
(4.75)
0.105 ***
(2.67)
0.187
(4.75)
0.218
(5.54)
0.187
(4.75)
0.130
(3.30)
0.187
(4.75)
0.218
(5.54)
0.015
(0.38)
0.015
(0.38)
0.015
(0.38)
0.015
(0.38)
0.015
(0.38)
0.015
(0.38)
0.093
(2.36)
0.050
(1.27)
0.140
(3.56)
0.080
(2.03)
0.093
(2.36)
0.045
(1.14)
0.093
(2.36)
0.073
(1.85)
—
—
—
—
—
—
1.500
(38.10)
0.821
(20.85)
1.750
(44.45)
1.071
(27.20)
1.391
(35.33)
0.688
(17.47)
1.625
(41.28)
0.943
(23.95)
E14/E29/E30 –00A
E13/G13
E14/E29/E30
E13/G13
E14/E29/E30
E13/G13
E14/E29/E30
†
E13/G13
E14/E29/E30
†
E13/G13
E14/E29/E30
†
E13/G13
E14/E29/E30
†
–50K
–00K
–50H
–00H
–00M
–00J
425
850
100
285
65
170
100
285
63
211
Circuitry
— Single Pole
Contact arrangement available in choice of
single pole double throw or single pole sin-
gle throw, either normally open or normally
closed. In general, normally open may be
specified by changing suffix number from
00 to 01 and normally closed by changing
suffix number to 02.
Example: E13-00E is double throw,
E13-01E is normally open, and E13-02E
is normally closed.
Terminals
— Single Pole
Standard 0.250″ x 0.032″ (6.35mm x 0.81mm)
[Optional 0.187″ x 0.032″ (4.75mm x 0.81mm)]
QC terminals can be furnished with angle
formed up or down. Forms include straight
30°, 45°, 85° up or down. Other forms can
be provided.
* Measured above reference line. Refer to dimensional drawing above. **Actuator tolerance ±0.031 inches (0.79mm).
† E14, E29 and E30 actuators are shorter and formed up 11° at the button.
*** E30 minimum over- travel is 0.150 (3.81).
G13 and E30 have operating point tolerances of ± 0.30.
Ordering Information
Select the current rating you need.
Combine the corresponding Series/Prefix
number with the appropriate suffix number
for the switch you need.
Specifications subject to change without notice.
Mounting
— Single Pole
Recommended mounting screw: #6-32
round head. Recommended torque on screw:
6 inch lbs. max. Recommended maximum
torque for ferrule: 20 inch pounds
49
Dimensions
— Double Pole
inches (mm)
Actuators
— Double Pole
Standard type integral hinged lever and
roller actuators are available in choice of
two mounting positions. Actuation lengths
are dimensioned from centerline of switch
mounting hole as shown.
Actuator Specifications
— Double Pole
Maximum Maximum
Operating Pretravel
Force
inches
(g)
(mm)
Operating
Point*
inches
(mm)
Each Pole
Minimum Max. Movement Actuation
Overtravel
Differential
Length
inches
inches
inches
(mm)
(mm)
(mm)
“J” & “M” Type
Optional Hardware
— Double Pole
Brass Hex Nut
Brass Knurled Nut
Brass Hex Nut
(Nickel-Plated)
Brass Knurled Nut
(Nickel-Plated)
Star Washer
(Lock Washer)
—
—
—
—
1.500
(38.10)
0.821
(20.85)
1.750
(44.45)
1.071
(27.20)
1.391
(35.33)
0.688
(17.48)
1.625
(41.28)
0.943
(23.95)
Series/
Prefix
Actuator
Type
Switch
Type
0012-0023
0012-0025
0012-0028
0012-0026
0012-0073
E19/G20
E20/E28
E19/G20
E20/E28
†
E19/G20
E20/E28
†
E19/G20
E20/E28
†
E19/G20
E20/E28
†
E19/G20
E20/E28
†
E19/G20
E20/E28
†
–00A
850
1280
–-00J
850
1280
–00M
850
1280
–00H
205
425
–50H
130
285
–00K
212
425
–50K
150
312
0.050
(1.27)
0.100
(2.54)
0.050
(1.27)
0.100
(2.54)
0.050
(1.27)
0.100
(2.54)
0.275
(6.99)
0.330
(8.38)
0.400
(10.16)
0.600
(15.24)
0.250
(6.35)
0.348
(8.84)
0.312
(7.92)
0.525
(13.34)
0.285±0.030
(7.24±0.76)
0.248±0.030
(6.30±0.76)
0.670±0.030
(17.02±0.76)
0.630±0.030
(16.00±0.76)
0.812±0.030
(20.62±0.76)
0.774±0.030
(19.66±0.76)
0.312±0.062
(7.92±1.57)
0.468±0.062
(11.89±1.57)
0.281±0.062
(7.14±1.57)
0.437±0.062
(11.10±1.57)
0.718±0.062
(18.24±1.57)
0.860±0.062
(21.84±1.57)
0.687±0.062
(17.45±1.57)
0.828±0.062
(21.03±1.57)
0.080
(2.03)
0.050
(1.27)
0.080
(2.03)
0.050
(1.27)
0.218
(5.54)
0.188
(4.78)
0.187
(4.75)
0.156
(3.96)
0.187
(4.75)
0.156
(3.96)
0.187
(4.75)
0.156
(3.96)
0.187
(4.75)
0.146
(3.71)
0.015
(0.38)
0.015
(0.38)
0.015
(0.38)
0.015
(0.38)
0.015
(.038)
0.015
(0.38)
0.093
(2.36)
0.050
(1.27)
0.140
(3.56)
0.080
(2.03)
0.093
(2.36)
0.045
(1.14)
0.140
(3.56)
0.075
(1.91)
—
—
Circuitry
— Double Pole
Contact arrangement available in choice of
single pole double throw or single pole sin-
gle throw, either normally open or normally
closed. In general, normally open may be
specified by changing suffix number from
00 to 01 and normally closed by changing
suffix number to 02.
Example: E19-00A is double throw,
E19-01A is normally open, and E19-02A
is normally closed.
* Measured above reference line. Refer to dimensional drawing above. **Actuator tolerance ±.0.031 inches (0.79mm).
† E20 and E28 actuators are shorter and formed up 15° at the button.
Contact factory for E25 specifications.
Terminals
— Double Pole
Standard 0.250″ x 0.032″ (6.35mm x 0.81mm)
[Optional 0.187″ x 0.032″ (4.75mm x 0.81mm)]
QC terminals can be furnished with angle
formed up or down on common as well as
open or closed terminal. Forms include
straight 30°, 45°, 85° up or down. Other
forms can be provided.
Ordering Information
Select the current rating you need. Combine
the corresponding Series/Prefix number
with the appropriate suffix number for the
switch you need. Note: Consult factory for
part number when ordering E19A switches.
50
Specifications subject to change without notice.
Mounting
— Double Pole
Recommended mounting screw: #6-32
round head. Recommended torque on
screw: 6 inch lbs. max. Recommended
maximum torque for ferrule: 20 inch pounds.