-
Tantalum capacitors are called tantalum electrolytic capacitors, which are also a type of electrolytic capacitors. They use metal tantalum as a dielectric, and do not use electrolytes like ordinary...[Details]
-
China's highway toll collection (
ETC
) system application market is growing. In order to promote the rapid development and maturity of ETC applications, relevant national departments have la...[Details]
-
Italy and France: European Investment Bank provides €600 million loan to STMicroelectronics to strengthen the European semiconductor industry • The loan is intended to finance research and developm...[Details]
-
In the energy spectrum measurement, the multi-channel pulse amplitude analyzer measures the peak amplitude of the pulse, but the peak of the pulse signal after linear amplification of the detector out...[Details]
-
1. The oscilloscope must be calibrated and compensated before use. The purpose of calibration is to optimize the current measured value and not be affected by the external temperature environment,...[Details]
-
The earliest forms of recording data were manual measurements, recorded in written logs, and plotted on graph paper. Towards the end of the 19th century, the strip chart recorder helped automate the d...[Details]
-
1. First, configure the system clock as follows: RCC_DeInit(); //Reset the peripheral RCC register to the default value /* Enable HSE */ RCC_HSEConfig(RCC_HSE_ON); //Set external high sp...[Details]
-
Wen Ku, spokesperson of the Ministry of Industry and Information Technology, said at a press conference held by the State Council Information Office that the number of 5G users has grown very rapidly...[Details]
-
On October 13, Japan's Canon announced the launch of the FPA-1200NZ2C nanoimprint semiconductor manufacturing equipment, which will perform the most important semiconductor manufacturing process-circ...[Details]
-
Image source: Twitter The soap opera of Apple’s car manufacturing has new twists and turns every now and then. On March 16, Foxconn Chairman Liu Yangwei revealed that the company will decide this ...[Details]
-
1 Introduction In arc welding inverters, the transient transition process and characteristics of high-power fast recovery diodes have a crucial impact on the normal operation of high-frequency recti...[Details]
-
Debugging MCU often requires using a serial port.
The bare metal front-end and back-end systems are basically based on timer interrupts.
init.s startup code
Mode_US...[Details]
-
The voltage stress of the switching tube of the dual-tube forward converter is equal to the input voltage, and there will be no leakage inductance spike when it is turned off. In addition, it has a...[Details]
-
Why do we need EMI circuits? When the power supply is working, the switching transistor will generate a lot of EMI and RFI, which will seriously affect the normal operation of other electronic equip...[Details]
-
1. Introduction Compared with traditional linear power supplies, switching power supplies have inherent advantages such as small size, light weight, and high efficiency. Therefore, in recent years, ...[Details]