[i=s]This post was last edited by yhye2world on 2019-8-6 13:06[/i]1. Application scenario:used to measure the displacement of the tip of a signature pen;
The displacement sensor is installed inside th...
I am working on the custom method (using the serial port) to program the FLASH of 430. After the program is completed, the power is turned off and reset, and the reset button can run the new program. ...
The first time data is received and read, it is normal. The second time data is sent, the message object does not change, and the previous data will be re-read during the next interrupt. Why is this?...
Automotive electronic design must provide more competitive cost advantages under the conditions of multiple design requirements such as performance, reliability, time to market, etc. This article will...
/******************************************************** Program function: MCU keeps sending data to PC, and displays ASCII characters corresponding to 0~127 on the screen----------------------------...
Abstract: This paper discusses the circuit structure and basic principle of power factor correction circuit that must be possessed by high-performance electronic ballast system, and introduces the ele...