Use the u8g2 library to drive the display screen using SPI
The development board ESP32-S3-DevKitC-1 is wired as follows: /* clock=*/13, /* data=*/11, /* cs=*/10, /* dc=*/9, /* reset=*/8Call the routin...
[i=s]This post was last edited by detail2mix on 2020-5-13 21:25[/i]If anyone knows, please let me know, thank you!
The current limiting IC (TI TPS2559) is connected to the front end of the input....
Microwave communication , in English, refers to the method of using microwaves as carriers to carry information and conduct relay communications.
Microwaves are electromagnetic waves with a frequency ...
I have published my own development board before. I have made some modifications based on your suggestions, as follows:
Next I will use this development board to make a handheld game console, which is...
During the STM32 hardware simulation debugging process, after running a circle, I re-run WHILE(1), as shown in (1). Pressing F10 or F11 is ineffective and the program stops at WHILE(1) and does not mo...