• Extremely low wavelength dependent loss (WDL) and PDL
• Up to 10-channel arrays
Applications
• EDFA
• Raman amplifiers
• Add/Drop monitoring
• DWDM systems
JDSU miniature integrated power monitors are designed for channel monitoring
in dense wavelength division multiplexing (DWDM) systems and Add/Drop
modules. They can also be used for signal/pump power monitoring in erbium
doped fiber amplifiers (EDFAs) and Raman amplifiers where integrated solutions
tend to replace traditional fused fiber tap + photodiodes. The miniaturized
version is a high performance active hybrid device that incorporates a micro-optic
tap coupler and high-sensitivity InGaAs photodiode in a miniature package. It
offers high reliability, compact footprint with ultra-wide bandwidth, and very low
polarization dependent loss (PDL).
NORTH AMERICA
:
800 498-JDSU (5378)
WORLDWIDE
:
+800 5378-JDSU
WEBSITE
:
www.jdsu.com
MINIATURE INTEGRATED POWER MONITOR
2
IPM Single Unit Diagram
(Specifications in mm unless otherwise noted.)
20.1 MAX
18.35
7.0 MAX
Ø 3.20
0.50 X 0.50
Ø 0.50
PITCH 2.54
IPM Array (6 to 8 channels) Diagram
(Specifications in mm unless otherwise noted.)
32.00
3.20
PITCH 2.54 X 11
=27.94
3.0
Ø 0.51
Ø 1.14
PIN 1
27.94
32.50
22.86
6.00
IPM Array Pinout
(8 channel only)
BOTTOM VIEW
Pin
1
2
3
4
5
6
7
8
9
10
11
12
Description
Anode (Common)
Cathode 1
Cathode 2
Anode (Common)
Cathode 3
Cathode 4
Cathode 5
Anode (Common)
Cathode 6
Cathode 7
Anode (Common)
Cathode 8
MINIATURE INTEGRATED POWER MONITOR
3
Specifications
Parameter
Wavelength range
C-Band
L-Band
C+L Band
Insertion loss (input to output)
Wavelength flatness (input to output)
Polarization dependent loss (input to output)
PMD (input to output)
Optical return loss
PD operating bias voltage, V
R
PD responsivity
PD linearity
PD dark current
PD cut-off frequency
Input optical power
Operating temperature
Storage temperature
Tensile load
Package dimensions
Single unit
6 to 8 channels array
10 channels array
Fiber type
Pigtail color code
Specification
Maximum
Maximum
Maximum
Maximum
Minimum
Minimum
Maximum
Maximum
Maximum
1510-1580 nm
1560-1625 nm
1510-1625 nm
See table below
0.002 dB/nm
0.03 dB
0.1 ps
45 dB
-5 V (typical)
0.8 A/W (for net responsivity, see table below)
±10%
1 nA @ V
R
= -5 V and 23 °C
600 MHz @ V
R
= -5 V and R
L
= 50 W
See table below
-20 to 75 °C
-40 to 85 °C
5N
3.2 mm x 18.5 mm
32 mm x 32.5 mm x 6 mm
38.8 mm x 32.5 mm x 6 mm
SMF-28, 250 µm primary coating
Black (input port); Clear (output port)
Note: Parameters are specified for the signal wavelength range, all polarization states, and operating temperature range without connector unless otherwise stated.
Tap Ratio and Insertion Loss Table
Code
Tap Ratio
Maximum Insertion Loss
(Input to Output)
0.5 dB
0.5 dB
0.5 dB
0.5 dB
0.6 dB
0.8 dB
Minimum Net Responsivity
1
Maximum Optical Power
2
1
2
3
4
5
T
1%
2%
3%
4%
5%
10%
0.008 A/W
0.016 A/W
0.024 A/W
0.032 A/W
0.040 A/W
0.080 A/W
500 mW
250 mW
150 mW
125 mW
100 mW
50 mW
1. The net responsivity is defined as the ratio of the PD current output and optical power measured at output fiber.
2. The maximum optical power is the maximum value of the power at input port within the PD linearity range specified.
MINIATURE INTEGRATED POWER MONITOR
Ordering Information
For more information on this or other products and their availability, please contact your local JDSU account manager or
JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at
customer.service@jdsu.com.
Sample: IPM-C82310010
IPM-
Code
C
L
1
Wavelength
C-band
L-band
C + L bands
Code
1
2
3
4
5
T
Tap Ratio
1%
2%
3%
4%
5%
10%
Code
2
3
4
Package Size
Single
unit
6-8
channel
array
10-channel array
001
Code
0
1
2
3
4
5
8
9
A
B
C
Connector Type
No
connector
FC/PC
FC/SPC
FC/APC
SC/SPC
SC/APC
ST
FC/UPC
SC/UPC
LC/SPC
LC/UPC
Code
1
6
7
8
T
Channels
Single
device
6-channel array
7-channel array
8-channel array
10-channel array
Code
1
2
4
5
Fiber Length
1m
2m
0.5 m
1.5 m
SMF-28 is a registered trademark of Corning Incorporated.
ST is a registered trademark of Lucent Technologies.
All statements, technical information and recommendations related to the products herein are based upon information believed to be
reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any
inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application. JDSU reserves
the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, includ-
ing withdrawal at any time of a product offered for sale herein. JDSU makes no representations that the products
herein are free from any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are
It is good that the forum moderator organized this activity. It can form a long-term activity and let everyone share some of their practical experience. The time is short, so I will share a simple one...
Figure 1
A diagram of the 3-wire analog output module is shown in Figure 1. The module uses a dual-channel DAC8562 digital-to-analog converter (DAC) to drive the voltage and current output stages of t...
I2C uses only two data lines for communication, and multiple devices can be mounted under one set of communication lines, so it is widely used in the communication of sensors and other chips. For exam...
5G Network SlicingThe concept and function of end-to-end network slicingThe relationship between network slicing, PDU session, and QoSUser plane and control plane management of network slice instances...
As the world's population grows and more vehicles are on the road, improvements in traffic safety cannot come fast enough. Although the fatality rate has been reduced by more than half since 2000, fr...[Details]
Fluke Networks has introduced an economical entry-level copper cable certifier, the FLUKE DSX-600 CH , which can improve the productivity of small-scale cable installation work and increase the retu...[Details]
Many people raised a question when Huawei launched the smart screen product, that is, why this thing that looks like a smart TV is called a smart screen. With the continuous upgrading and iteratio...[Details]
BOE (BOE) exclusively supplies OPPO Find N3 Flip and OPPO Watch4 Pro series, setting a new benchmark for flexible OLED displays
On August 29, OPPO launched the OPPO Find N3 Flip and ...[Details]
In response to the country's "dual carbon" strategy, in line with the principle of "mutual benefit and win-win development", after friendly negotiations, on June 30, 2023, the company signed a "Str...[Details]
Early morning on February 18, it was reported that Intel CEO Pat Gelsinger is seeking to revive the company through a major business transformation. The company's management released performance expe...[Details]
Using a scatter table can reduce program writing as much as possible and is convenient.
Reduce the number of judgments.
Program name: scatter program test
; Description: LED1 lights up after starti...[Details]
Previously, a foreign digital anchor shared a video comparing the performance of iPhone 11/12 and iPhone XR, and the result showed that XR performed better. Compared with iPhone 11, iPhone XR has f...[Details]
In autonomous driving technology, software systems are one of the areas with the most technical barriers. In recent years, many autonomous driving startups have been established at home and abroad, s...[Details]
With the development of electronic technology, electromagnetic compatibility issues have become a very important and difficult problem for circuit design engineers. Based on years of engineering expe...[Details]
At present, with the rapid development of the power industry, a large number of nonlinear loads have been put into use, which has increased the harmonic content of the power system, seriously affec...[Details]
When I use IAR for stm8 go to define, I cannot jump, and the compiler does not give any prompts. I searched Baidu for many solutions but none of them worked. Finally, I found that I had to compile it...[Details]
Last time we used the delay function and while loop to flash an LED. This time we add all the LEDs and make them flash in sequence to create a running light effect. There are 4 LEDs on the developm...[Details]
In C51, the alarm when interrupt and non-interrupt functions call the same function is RECURSIVE CALL TO FUNCTION. The standard C language dynamically generates local variable space in the stack, s...[Details]
1. Preparation of startup documents
$ NOMOD51 ; Ax51 macro assembler control command: disable predefined 8051
; Customize the storage area that needs to be initialized after power-on
...[Details]
Power technology
京公网安备 11010802033920号
EEWORLD
