IA82510
ASYNCHRONOUS SERIAL CONTROLLER
FEATURES
•
•
•
•
•
•
Form, Fit, and Function Compatible with the Intel
®
82510
Data Sheet
As of Production Ver. 01
Packaging options available: 28 Pin Plastic or Ceramic DIP, 28 Pin Plastic
Leaded Chip Carrier, 28 Pin Ceramic Leadless Chip Carrier
Asynchronous Serial Channel Operation
Separate Transmit and Receive FIFOs with Programmable Threshold
Programmable Baud Rate Generators up to 288K Baud
Special Protocol Features
- Control Character Recognition
- Auto Echo and Loopback Modes
- 9-Bit Protocol Support
- 5 to 9 Bit Character Format
The IA82510 is a "plug-and-play" drop-in replacement for the original IC. innovASIC produces replacement ICs
using its MILES
TM
, or Managed IC Lifetime Extension System, cloning technology. This technology produces
replacement ICs far more complex than "emulation" while ensuring they are compatible with the original IC.
MILES
TM
captures the design of a clone so it can be produced even as silicon technology advances. MILES
TM
also verifies the clone against the original IC so that even the "undocumented features" are duplicated. This data
sheet documents all necessary engineering information about the IA82510 including functional and I/O
descriptions, electrical characteristics, and applicable timing.
Package Pinout
IA82510
D4
D5
D6
D7
INT
TXD
VSS
X2 or OUT2n
X1 or CLK
SCLK or RIn
DSRn or TA or OUT0n
DCDn or ICLK or OUT1n
RXD
CTSn
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(28)
D3
D2
D1
D0
A2
A1
A0
VDD
RDn
WRn
CSn
RESET
RTSn
DTRn or TB
INT
TXD
VSS
X2 or OUT2n
X1 or CLK
SCLK or RIn
DSRn or TA or OUT0n
(5)
(6)
(7)
(8)
(9)
(10)
(11)
D7 D6 D5 D4 D3 D2 D1
28 Pin DIP
(27)
(26)
(25)
(24)
(23)
(22)
(21)
(20)
(19)
(18)
(17)
(16)
(15)
(4)
(3) (2) (1) (28) (27) (26)
(25)
(24)
D0
A2
A1
A0
VDD
RDn
WRn
IA82510
28 Pin LCC
(23)
(22)
(21)
(20)
(19)
(12) (13) (14) (15) (16) (17) (18)
DCDn or ICLK or OUT1n
DTRn or TB
Copyright
©
2001
ENG211001219-01
The End of Obsolescence™
RESET
RXD
CTSn
RTSn
CSn
innovASIC
www.innovasic.com
Customer Support:
1-888-824-4184
Page 1 of 11
IA82510
ASYNCHRONOUS SERIAL CONTROLLER
DESCRIPTION
Data Sheet
As of Production Ver. 01
The IA82510 is an asynchronous serial controller that provides a CPU interface to one transmit
and one receive channel. It is Form, Fit, and Function compatible with the Intel 82510.
Configuration registers are used to control the serial channel, interrupts, and modes of operation.
The CPU controls this device via address and data lines with read/write control. The CPU also
uses this interface to read and write data to receive and transmit data through the serial channel.
FIFOs and various serial modes can be used to help off-load the CPU from transmitting and
receiving data. An interrupt line provides an indication to the CPU that the device requires
servicing. The device can be configured for 8250A/16450 compatibility.
Functional Block Diagram
IA82510
A(2:0)
D(7:0)
RDn
WRn
CSn
INT
RESET
RECEIVER
RXD
CTSn
RTSn
TIMING
(Baud Rate
Generators A & B,
Clocking
PIN
CONFIGURATION
DSRn or TA or OUT0n
DCDn or ICLK or OUT1n
DTRn or TB
MODEM
BUS INTERFACE
(Reset Logic,
Registers,
Interrupt Generation,
TRANSMITTER
TXD
CONFIG., STATUS, RXDATA
TXDATA
X1 or CLK
X2 or OUT2n
SCLK or RIn
Copyright
©
2001
ENG211001219-01
The End of Obsolescence™
innovASIC
www.innovasic.com
Customer Support:
1-888-824-4184
Page 2 of 11
IA82510
ASYNCHRONOUS SERIAL CONTROLLER
Functional Overview
Transmitter
Data Sheet
As of Production Ver. 01
The Transmit function consists of a 4
×
11 bit FIFO, and a Transmit Engine. The 4
×
11 FIFO is
configurable as any depth between one and four words inclusive. The transmit engine is
responsible for reading the data out of the FIFO and placing it in the proper order on the TXD pin.
The transmit engine is highly configurable to be compatible with numerous formats, including
16450 and 8250 modes of communication. Transmit Communication parameters that can be
programmed include:
•
Parity modes
•
Stop Bits
•
Character Length
•
FIFO Depth
•
Clocking Options
•
RTS and CTS modes
See the Register Description for more details.
Receiver
The Receiver function consists of a 4
×
11 configurable FIFO and a Receive Engine. The receive
engine is responsible for sampling the data on the RXD input pin, formatting the data, and placing
the data in the FIFO. The receive engine is highly configurable with parameters that include:
•
Parity modes
•
Stop Bits
•
Character Length
•
FIFO Depth
•
Clocking Options
•
Address Matching Options
•
Control Character Detection
•
RTS and CTS modes
See the Register Description for more details.
Bus Interface
The Bus Interface is a simple interface that allows a micro-processor or micro-controller to read
and write the IA82510 Registers. It consists of the following I/O lines:
•
A0, A1, A2 :
3 Bit Address
•
D0-D7 :
8 Bit Data
•
RDn:
Active Low Read Enable
•
WRn:
Active Low Write Enable
•
CSn:
Active Low Chip Select
•
INT:
Interrupt Output
•
RESET:
Chip Reset
Copyright
©
2001
ENG211001219-01
The End of Obsolescence™
innovASIC
www.innovasic.com
Customer Support:
1-888-824-4184
Page 3 of 11
IA82510
ASYNCHRONOUS SERIAL CONTROLLER
Register Description
Register
ACR0
ACR1
BACF
BAH
BAL
BANK
BBCF
BBH
BBL
CLCF
FLR
FMD
GER
GIR_BANK
GSR
ICM
IMD
LCR
LSR
MCR
MIE
MSR
PMD
RCM
RIE
RMD
RST
RXDATA
RXF
TCM
TMCR
TMD
TMIE
TMST
TXDATA
TXF
Table 1 – IA82510 Register Summary
ADDR
Bank
DLAB
Mode
111
00
X
R/W
101
10
X
R/W
001
11
0
R/W
001
00
1
R/W
000
00
1
R/W
010
X
X
W
011
11
X
R/W
001
11
1
R/W
000
11
1
R/W
000
11
0
R/W
100
01
X
R
001
10
X
R/W
001
00
0
R/W
010
X
X
R
111
01
X
R
111
01
X
W
100
10
X
R/W
011
00
X
R/W
101
00
X
R/W
100
00
X
R/W
100
01
X
W
101
11
X
R/W
110
00
X
R/W
110
01
X
R
100
11
X
R/W
101
01
X
W
110
10
X
R/W
111
10
X
R/W
101
01
X
R
000
00
0
R
01
X
001
01
X
R
110
01
X
W
011
01
X
W
011
10
X
R/W
110
11
X
R/W
011
01
X
R
000
00
0
W
01
X
001
01
X
W
Data Sheet
As of Production Ver. 01
Default
00000000
00000000
00000100
00000000
00000010
00000000
10000100
00000000
00000101
00000000
00000000
00000000
00000000
00000001
00010010
N/A
00001100
00000000
01100000
00000000
00001111
00000000
11111100
N/A
00011110
00000000
00000000
Unknown
Unknown
N/A
N/A
00000000
00000000
00110000
N/A
N/A
Copyright
©
2001
ENG211001219-01
The End of Obsolescence™
innovASIC
www.innovasic.com
Customer Support:
1-888-824-4184
Page 4 of 11
IA82510
ASYNCHRONOUS SERIAL CONTROLLER
AC/DC Parameters
Absolute maximum ratings:
Data Sheet
As of Production Ver. 01
Supply Voltage, V
DD
…………………………….…-0.3V to +6.0V
Input Voltage, V
IN
…………………………………-0.3V to V
DD
+0.3V
Input Pin Current, IIN…………………………….±10 mA, 25° C
Operating Temperature Range……………………..-40° C to +85°C
Ambient temperature under bias........................……..-40°C to +85°C
*
Storage temperature.......................................…........….- 55°C to +150°C
Lead Temperature………………………………….+300°C, 10 sec.
Power dissipation..............................................................155 mW, 125°C, 25MHz, 15% Toggle
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. Operating the device beyond the conditions
indicated in the “recommended operating conditions” section is not recommended. Operation at the “absolute maximum ratings” may adversely affect
device reliability.
*
The input and output parametric values in section VII-B, parts 1, 2, and 3, are directly related to ambient
temperature and DC supply voltage. A temperature or supply voltage range other than those specified in the
Operating Conditions above will affect these values and part performance is not guaranteed by innovASIC.
Copyright
©
2001
ENG211001219-01
The End of Obsolescence™
innovASIC
www.innovasic.com
Customer Support:
1-888-824-4184
Page 5 of 11
京公网安备 11010802033920号
EEWORLD
