Factors to consider when choosing fuse:
1. Rated current : The rated current of a fuse usually needs to be derated by 25% when used at 25°C .A nominal 10A fuse is usually recommended to have an operat...
nRF52840 Preview Development Kit (DK) （hereinafter referred to as nRF52840-DK），[/font][color=rgb(85, 85, 85)][font="][size=10.5pt][font=宋体]is[/font][/size][/font][/color][color=#333333][font=arial][si...
Aluminum electrolytic capacitors have a relatively large capacitance, large series resistance, large inductive reactance, and are sensitive to temperature. They are suitable for occasions where temper...
Measuring insulation resistance is the simplest and most commonly used experimental method. It is usually measured with an insulation resistance meter (also known as an insulation resistance meter, c...[Details]
Function of signal source: The signal source mainly provides the required known signals (various waveforms) to the circuit under test, and then uses other instruments to measure the parameters of int...[Details]
The Korea Display Industry Association announced that it will invest 18.3 billion won from 2022 to the end of 2026 to establish a Micro-LED ecosystem. Four institutions, including the Korea Electroni...[Details]
ICI Pilling Tester
It is a testing equipment used to test the pilling degree of textiles, including disc pilling tester, Martindale pilling tester, box pilling tester and other types.
ICI Pilli...[Details]
Recently, Sinoma Technology said in an interview with an investor organization that lithium battery separators will definitely be the company's key investment and cultivation industry in the next...[Details]
1 Introduction
With the increasing requirements for data acquisition in modern industrial production and scientific research, high-speed data acquisition is required in some high-speed and ...[Details]
As shown in the figure, the circuit is composed of 555 as the core. Used to identify each signal when comparing multiple signals. 555, R1, RP, and C1 form an astable multivibrator. The vert...[Details]
The white paper "Research on Pain Points of the Next-Generation Automotive Supply Chain - Automotive Semiconductors" was officially released On the morning of October 12, the white paper report "Re...[Details]
1. Introduction
With the rapid development of power electronics technology, switching DC regulated power supplies have been widely used in the power range of more than ten watts to medium and large...[Details]
Engineers often use different detection methods to judge the performance of transistors during the measurement of transistors, and occasionally detect transistors with damped output. Unlike the detect...[Details]
Industrial inverter and servo drive design engineers need to understand electromagnetic compatibility (EMC) immunity and electromagnetic emission (EMI), as well as isolation safety requirements. Do...[Details]
Author:
Frank Lamb
Troubleshooting and maintenance of motion control and robotics requires a deep understanding of all components and mechanisms in the robot.
Motion control involve...[Details]
introduction
Digital signal processing technology has been widely used in communication, radar, sonar, remote sensing, graphics and image processing, and speech processing. With the develo...[Details]
Digital high-voltage meter (AC/DC voltage divider) is used in power systems and electrical and electronic equipment manufacturing departments to measure industrial frequency AC high voltage and DC ...[Details]
Shanghai, China, June 26, 2024 -
Avnet announced that Rebeca Obregon will serve as the new president of element14, Avnet's global electronic components products and solutions distributor, effec...[Details]
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
