he RG series is a family of cost effective 3W single & dual output DC-DC converters. These converters combine Plastic case in a 24-pin
DIL package with high performance features such as 1500 VDC ~ 3500VDC input/output isolation voltage, continuous short circuit
protection with automatic restart and tight line / load regulation. Devices are encapsulated using flame retardant resin. Input voltages of
5,12,24 and 48 with output voltage of 5, 9, 12, 15, 24,
±5, ±9, ±12, ±15
and
±24
Vdc. High performance features include high efficiency
operation up to 82% and output voltage accuracy of
±1%
maximum.
All specifications typical at Ta=25°C, nominal input voltage and full load unless otherwise specified
OUTPUT SPECIFICATIONS
Voltage accuracy
Line regulation
Load regulation
Ripple & noise
(20 MHz bandwidth)(1)
Short circuit protection
Temperature coefficient
Capacitor load
(2)
INPUT SPECIFICATIONS
Voltage Range
Max. Input Current
No-Load Input Current
Input Filter
Input Reflected Ripple Current
(3)
GENERAL SPECIFICATIONS
Efficiency
I/O Isolation Voltage
(3 sec)
Input/Output
Metal Case/Input & Output
I/O Isolation Capacitance
I/O Isolation Resistance
Switching Frequency
Humidity
Reliability Calculated MTBF
(MIL-HDBK-217 F)
Safety Standard :
(designed to meet)
±1%
±0.5%
±0.5%
60mV pk-pk
Continuous
±0.02%/°C
See table
PHYSICAL SPECIFICATIONS
Case Material
Non-conductive Black Plastic(UL94V-0 rated)
Nickel-coated Copper
Non-conductive Black Plastic(UL94V-0 rated)
Base Material
¨0.5mm
Brass Solder-coated
Pin Material
Potting Material
Epoxy (UL94V-0 rated)
Weight
12.5g(Plastic Case)/15.0g(Metal
Case)
Dimensions
1.25”x0.8”x0.4”
ENVIRONMENT SPECIFICATIONS
Operating Temperature
-40° ~85°
See Derating Curve)
Maximum Case Temperature
100°
Storage Temperature
-40° ~125°
Cooling
Nature Convection
ABSOLUTE MAXIMUM RATINGS
(4)
These are stress ratings. Exposure of devices to any of these
conditions may adversely affect long-term reliability.
Input Voltage
(100mS)
5 Modes
-0.7~15 Vdc
12 Modes
-0.7~24 Vdc
24 Modes
-0.7~40 Vdc
48 Modes
-0.7~80 Vdc
Soldering Temperature
60°
(1.5mm from case 10 sec.)
T
See table
See table
See table
PI Type
35mA pk-pk
See table
, typ
1500~3500Vdc
1000Vdc
60 pF Typ.
1000M Ohm
100~400kHz
95% rel H
>2.199 Mhrs
IEC 60950-1
The information and specifications contained in this data sheet are believed to be correct at time of publication. However,
MOTIEN Technologies
accepts no responsibility
for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any
such product(s) or information contained herein.
1
RG - 3W 2:1 Regulated Single & Dual output
PART NUMBER STRUCTURE
Derating Curve
R G - 24 05 S 3 H M
OUTPUT POWER
Series Name
Input Voltage Range
05
- 4.5 ~ 9V
12
- 9 ~ 18V
24
- 18 ~ 36 V
48
- 36 ~ 72 V
3 Watt
Metal Case.
Optional, if no suffix " M"
mean plastic Case
3.5KVdc Isolation.
Optional, if no suffix "H"
mean1.5KVdc Isolation
100%
75%
50%
Output Type
S
- Single output
D
- Dual Output
S.O.A.
-20
0
20
40
60
80
85
25%
Output Voltage
5
- 5V
9
- 9V
12
- 12V
15
- 15V
24
- 24V
-40
100
120
AMBIENT TEMPERATURE(°
MODEL SELECTION GUIDE
MODEL NUMBER
RG-0505S3
RG-0509S3
RG-0512S3
RG-0515S3
RG-0524S3
RG-0505D3
RG-0509D3
RG-0512D3
RG-0515D3
RG-0524D3
RG-1205S3
RG-1209S3
RG-1212S3
RG-1215S3
RG-1224S3
RG-1205D3
RG-1209D3
RG-1212D3
RG-1215D3
RG-1224D3
RG-2405S3
RG-2409S3
RG-2412S3
RG-2415S3
RG-2424S3
RG-2405D3
RG-2409D3
RG-2412D3
RG-2415D3
RG-2424D3
INPUT
Voltage Range
(Vdc)
4.5-9
4.5-9
4.5-9
4.5-9
4.5-9
4.5-9
4.5-9
4.5-9
4.5-9
4.5-9
9-18
9-18
9-18
9-18
9-18
9-18
9-18
9-18
9-18
9-18
18-36
18-36
18-36
18-36
18-36
18-36
18-36
18-36
18-36
18-36
INPUT Current
No-Load
Full Load
(mA)
(mA)
40
857
40
40
40
40
40
40
40
40
40
20
20
20
20
20
20
20
20
20
20
12
12
12
12
12
12
12
12
12
12
833
810
810
857
869
857
833
810
857
328
324
316
316
316
324
320
320
320
320
156
156
152
152
156
160
158
156
156
156
OUTPUT
Voltage
(Vdc)
5
9
12
15
24
5
9
12
15
24
5
9
12
15
24
5
9
12
15
24
5
9
12
15
24
5
9
12
15
24
OUTPUT Current
Min. load
Full load
(mA)
(mA)
150
600
83.3
62.5
50
31.3
75
41.8
31.3
25
15.8
150
83.3
62.5
50
31.3
75
41.8
31.3
25
15.8
150
83.3
62.5
50
31.3
75
41.8
31.3
25
15.8
333
250
200
125
300
167
125
100
63
600
333
250
200
125
300
167
125
100
63
600
333
250
200
125
300
167
125
100
63
EFFICIENCY
@FL(%)
70
72
74
74
70
69
70
72
74
70
76
77
79
79
79
77
78
78
78
78
80
80
82
82
80
78
79
80
80
80
Capacitor
Load(uF)
2200
470
470
470
220
1000
220
220
220
100
2200
470
470
470
220
1000
220
220
220
100
2200
470
470
470
220
1000
220
220
220
100
Suffix
“H”
means 3.5KVdc isolation
Suffix
“M”
means Metal Case instead of standard Plastic case
The models listed above is just for standard type. If you need the special specification product, please contact our service member by telephone presented in shortform cover or e-mail
to : sales@motien.com.tw
2
RG - 3W 2:1 Regulated Single & Dual output
INPUT
Voltage Range
(Vdc)
36-72
36-72
36-72
36-72
36-72
36-72
36-72
36-72
36-72
36-72
INPUT Current
No-Load
Full Load
(mA)
(mA)
8
81
8
8
8
8
8
8
8
8
8
80
78
78
78
80
79
78
78
78
OUTPUT
Voltage
(Vdc)
5
9
12
15
24
5
9
12
15
24
OUTPUT Current
Min. load
Full load
(mA)
(mA)
150
600
83.3
62.5
50
31.3
75
41.8
31.3
25
15.8
333
250
200
125
300
167
125
100
63
MODEL NUMBER
RG-4805S3
RG-4809S3
RG-4812S3
RG-4815S3
RG-4824S3
RG-4805D3
RG-4809D3
RG-4812D3
RG-4815D3
RG-4824D3
EFFICIENCY
@FL(%)
77
78
80
80
80
78
79
80
80
80
Capacitor
Load(uF)
2200
470
470
470
220
1000
220
220
220
100
Suffix
“H”
means 3.5KVdc isolation
Suffix
“M”
means Metal Case instead of standard Plastic case
NOTE
1.
2.
3.
4.
5.
6.
Typical value at nominal input voltage and full load.
Test by nominal input voltage and constant resistor load.
Measured Input reflected ripple current with a simulated source inductance of 12uH.
Exceeding the absolute ratings of the unit could cause damage. It is not allowed for continuous operating.
Operation under no-load conditions will not damage these devices, however they may not meet all listed specifications.
It’s necessary to add minimum capacitor in output for some models, please check single model datasheet for detail value.
MECHANICAL SPECIFICATIONS FOR HIGH ISOLATION MODEL
31.75
(1.25)
Printed Face
10.16
(0.40)
PIN CONNECTIONS
PIN NUMBER
1
SINGLE
+V Input
+V Input
N.C.
N.C.
-V Output
+V Output
N.C.
-V Input
-V Input
DUAL
+V Input
+V Input
Common
Common
N.C.
V Output
+V Output
-V Input
-V Input
20.32
(0.80)
DC-DC CONVERTER
RG-XXXXXX
MOTIEN
d/c
27.94
(1.10)
3.05
(0.12)
Min.
2
10
2.54
(0.10)
0.50
(0.02)
1 2
24 Pin DIL Package
Non-Conductive Plastic
10 11 12
11
12
13
15
Bottom View
24 23
15
13
15.24
(0.60)
0.50
(0.02)
5.08
(0.20)
Notes: All dimensions are typical in millimeters ( inches ).
1. Pin diameter: 1.0
±0.05
( 0.02
±0.002
)
2. Pin pitch tolerance:
±0.35
(
±0.014
)
3. Case Tolerance:
±0.5
(
±0.02
)
23
24
The Pin Connection of high isolation one is the same with normal one.
The models listed above is just for standard type. If you need the special specification product, please contact our service member by telephone presented in shortform cover or e-mail
to : sales@motien.com.tw
3
RG - 3W 2:1 Regulated Single & Dual output
MECHANICAL SPECIFICATIONS
PIN CONNECTIONS
31.75
(1.25)
2.54
(0.10)
0.50
(0.02)
27.94
(1.10)
PIN NUMBER
1
SINGLE
+V Input
+V Input
N.C.
N.C.
-V Output
+V Output
N.C.
-V Input
-V Input
DUAL
+V Input
+V Input
Common
Common
N.C.
V Output
+V Output
-V Input
-V Input
DC-DC CONVERTER
RG-XXXXXM
MOTIEN
d/c
Printed Face
1 2
10 11 12
2
20.32
(0.80)
Bottom View
24 23
15
13
15.24
(0.60)
10
11
Built-in stand-offs
to ease PCB cleaning
0.50
(0.02)
5.04
(0.20)
12
13
15
For
“M” Case
10.16
(0.40)
24 Pin DIL Package
Nickel-Coated Copper
Min.
23
24
3.05
(0.12)
Notes: All dimensions are typical in millimeters ( inches ).
1. Pin diameter: 1.0
±0.05
( 0.02
±0.002
)
2. Pin pitch tolerance:
±0.35
(
±0.014
)
3. Case Tolerance:
±0.5
(
±0.02
)
The Pin Connection of high isolation one is the same with normal one.
MOTIEN
ISO 9001:2000 REGISTERED
No. 9, Keji 2nd Rd., Technology Industrial Park, Tainan City 70955, Taiwan
# Use PhoenixSuit to burn firmware to V853, and it keeps flashing automatically when burning firmware, and the solution cannot be stopped. The first time I set up the openart compilation environment o...
We have previously realized the control of the car's four motors using a mobile phone, but it is still relatively complicated to make the car move.
Features of Nam Wheel
The Namu wheel car can move ho...
On April 15, 2021, three employees of the Chengcheng County Water Supply Company of Shaanxi Water Group (hereinafter referred to as the Company) stabbed my family member twice in my home: one on the h...
STM32 SWD can only be downloaded once
There are many common STM32 core boards on the market. Take the STM32F103c8t6 core board as an example. The actual board is as shown below:During the use of the c...
[i=s]This post was last edited by wangerxian on 2022-8-4 13:15[/i]I welded a magnetic component some time ago, which was really annoying. How do you weld magnetic components?...
[font=微软雅黑][size=3][color=#000000]A certain vehicle-mounted electronic device needs to pass the vehicle standard CISRP25 LEVE3 test. The conduction current method exceeds the standard, and the 31MHZ f...
China Energy Storage Network News:
On August 20, China Unicom Nanjing Branch Xiaoying 5G base station was successfully opened. This is the first 5G base station built in a substation in China...[Details]
1 Introduction
As a kind of traction machinery, the motor is widely used in all aspects of the national economy because of its advantages such as simple structure, low price, easy use and main...[Details]
The minimum system crystal used is 8m. Here is the configuration process: Automatic clock switching, enable switching interrupt Clear the interrupt flag in the interrupt, enable CSS and turn on...[Details]
1 Overall design
As shown in Figure 1, the intelligent home appliance control system consists of a home intelligent control module, a home internal network system, and a GPRS module.
(1) ...[Details]
According to foreign media reports, on April 28 local time, Imagry announced a partnership with AutonomouStuff to incorporate its technology into AutonomouStuff 's leading autonomous driving technol...[Details]
The ARM9 series processors are mainstream embedded processors designed by the British company ARM, mainly including the ARM9TDMI and ARM9E-S series.
The new generation of ARM9 processors, through a...[Details]
November 18, 2021 – Mouser Electronics, the premier New Product Introduction (NPI) distributor with the widest selection of semiconductors and electronic components, is now stocking ESP32-S2-MINI mod...[Details]
Because some of the company's equipment has been produced for a long time, the PLC used is also relatively old. There is a Toshiba EX20/40 that uses the P8051AH microcontroller. The picture of its CP...[Details]
Introduction to PA-Cap PA-Cap polymer solid chip aluminum electrolytic capacitors have significant innovations in materials and core processes. Based on the study of the growth law of polypyrrole fil...[Details]
Each IO port of stm32 can be used as an entry for external interrupts. The interrupt controller of stm32f103 supports 19 external interrupt/event requests (question 1: What is the difference between ...[Details]
Global partners: Rutronik and audio specialist PUI Audio extend their cooperation agreement to rapidly make PUI’s extensive audio product portfolio available to customers worldwide. In particular, in...[Details]
This blog post by kthreadd briefly describes all kernel threads created in the system. // The parent process of process 1 2 is 0 // All other kernel threads (included by ) have the same parent proces...[Details]
After UBS disassembled MEB's ID3 (UBS Evidence Lab VW ID.3 Teardown), Dr. Holger Manz from Volkswagen's power battery department specifically shared a presentation material titled "Future Trends on B...[Details]
introduction
Designers often need low power isolated housekeeping supplies, and it would be nice to have a simple solution without having to buy power bricks or modules. However, you don't want to ...[Details]
On January 10, 2014, the National Coal Mining Museum in London, which witnessed two industrial revolutions, recently began to try solar photovoltaic power generation. The project adopted Jiangsu Go...[Details]
Domestic Chip Exchange
京公网安备 11010802033920号
EEWORLD
