Everyone, I want to use a single TIM1 to output a specified number of pulses through PA7 (TIM1_CH1N). I have referred to many examples, both online and in the STM32CUBE library. There is no output, on...
[size=14px]I am using STC8a8k microcontroller, and want to realize EEPROM reading and writing by simulating I2C bus, but I always feel that nothing is written in, and the result of reading it through ...
Introduction to Plug and Play and Power Management This chapter describes the main concepts related to writing drivers that support Plug and Play and power management. This information is organized as...
Limitations of high-frequency buck converters[url=https://training.eeworld.com.cn/TI/video/9932] [size=5]Click to watch the wonderful power supply lecture: Limitations of high-frequency buck converter...
When debugging the 5509A program, I found that I could not connect to the emulator, but I could do it by changing the board. It took me a while to solve this problem. I recorded the test process and s...
With the microcontroller, filtering is more often implemented with algorithms. It is much better than the previous circuit implementation method (in my opinion). What do you think of the effects of va...