EEWORLDEEWORLDEEWORLD

Part Number

Search

SK236A-6X601ULU702U1210

Description
Rocker Switch, SPDT, Latched, 4A, 30VDC, Solder Terminal, Paddle Type Actuator, Panel Mount
CategoryMechanical and electronic products    switch   
File Size289KB,10 Pages
ManufacturerAPEM
Environmental Compliance  
Download Datasheet Parametric View All

SK236A-6X601ULU702U1210 Overview

Rocker Switch, SPDT, Latched, 4A, 30VDC, Solder Terminal, Paddle Type Actuator, Panel Mount

SK236A-6X601ULU702U1210 Parametric

Parameter NameAttribute value
Is it lead-free?Lead free
Is it Rohs certified?conform to
MakerAPEM
Reach Compliance Codecompliant
ECCN codeEAR99
Actuator typePADDLE TYPE
body width15.7 mm
body height16.6 mm
Body length or diameter19.5 mm
Contact (AC) maximum rated R load5A@125VAC
Maximum contact current (AC)5 A
Maximum contact current (DC)4 A
Contact (DC) maximum rated R load4A@30VDC
Maximum contact voltage (AC)125 V
Maximum contact voltage (DC)30 V
Electrical life40000 Cycle(s)
Manufacturer's serial numberS
Installation featuresPANEL MOUNT
Maximum operating temperature85 °C
Minimum operating temperature-20 °C
method of packingBULK
sealEPOXY TERMINAL SEALED
surface mountNO
Switch actionLATCHED
switch functionSPDT
Switch typeROCKER SWITCH
Termination typeSOLDER
S and SR series
Washable rocker and paddle switches
Distinctive features and specifications
Sealed
• Secure assembly of the two case parts
• Internally sealed bushing
• Epoxy sealed terminals
Process compatible (S series)
• Wave solderable
• Washable
Optional ESD protection
ELECTRICAL SPECIFICATIONS
MATERIALS
D
• Max. current/voltage rating with resistive load :
- silver contacts (A or 1) : 2A 250VAC - 5A 125VAC - 4A 30VDC
- brass, gold plated contacts (CD or 0) : 0,4VA 20VAC or DC
- silver, gold plated contacts (AD or 2) : 2A 250VAC - 5A 125VAC - 4A 30VDC
(300mA 30VDC for gold plating)
• Initial contact resistance : 10 mΩ max.
• Insulation resistance : 1.000 MΩ min.
• Dielectric strength : 1.000 Vrms 50 Hz min.
• Electrical life with nominal load :
Contacts
A or 1
CD or 0
AD or 2
Number of cycles
2 positions
40.000
100.000
40.000
3 positions
40.000
50.000
40.000
• Case and cover : UL94-V0,
polyamide, glass filled or PES
• Actuator : polyamide
• Contacts
CD
or
0
: brass, gold plated
A
or
1
: silver
AD
or
2
: silver, gold plated
• Terminal seal : epoxy
GENERAL SPECIFICATIONS
AGENCY APPROVALS
• Mechanical strength :
Terminals are strengthened by a bracket or a ground plate ensuring the
rigidity of the switch on the board. Actuator strength is 10N max.
• Operating temperature : -20°C to +85°C
• Storage temperature : -40°C to +85°C
• Moisture :
The insulating materials employed and the complete seal permit the switches
to withstand a 56 days moisture test (IEC 68-2-3).
• Soldering - thermal shock (S series only) :
The switches are especially designed for flow soldering at 260°C during
5 seconds owing to high temperature polymer parts.
• Iron soldering (SR series) : 300°C 5 sec. max.
• Solderability : The switches are tested at 235°C according to IEC 68-2-20
after accelerated aging.
Availability
: consult factory for
details of approved models.
Marking
: to order switches
marked UL, complete appropriate
box of ordering format.
D-10
www.apem.com
APEM
【CH579M-R1】+ Construction and use of development environment
The eagerly awaited development board finally arrived in the sunset glow! In addition to the CH579M-R1 development board, it also comes with a USB cable, as shown in Figure 1.Figure 1 Development boar...
jinglixixi Domestic Chip Exchange
[National Technology N32G457 Review] 4. Transplanting the small embedded task manager MillisTaskManager
[i=s]This post was last edited by yang377156216 on 2022-2-11 14:39[/i]【Foreword】 In embedded software development, including MCU development, software architecture is an issue that developers must ser...
yang377156216 Domestic Chip Exchange
About the "edge" of the pulse
The edge when a positive pulse is generated is generally called the rising edge, and the edge when it ends is called the falling edge. So, for the driving signal of P-MOSFET, the edge where the pulse ...
PowerAnts Analog electronics
Design of CAN-USB Converter Based on ARM7
[size=4] During the development of ABS (anti-lock braking system) ECU (electronic control unit), calibration technology is usually used to determine its driving parameters and control parameters in re...
Aguilera Microcontroller MCU
MicroPython enhances WB55 functionality
Added WB55 RF processor and BLE functions:stm32/boards: Enable support for bluetooth on WB55 boards. stm32: Add support for RF coprocessor on WB55 MCUs....
dcexpert MicroPython Open Source section
[Jianan K510 Review 1] One-stop compilation and burning experience
On Thursday, the nmg administrator said that there was a k510 that could be reviewed. I happened to be a little interested in it, so I agreed. After all, I had never reviewed anything Linux-related be...
RCSN Domestic Chip Exchange

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号