D2JW
standard and IEC IP67.
Sealed Subminiature Basic Switch
Ultra-small and Highly Sealed
●
Degree of protection conforms to JIS Waterproof
(Excluding the terminals on terminal models)
●
Wide range of operating temperatures from
−40°C
to
+85°C.
●
Gold-alloy crossbar contact and coil spring offer
long durability and high contact reliability.
RoHS Compliant
D
2
J
W
Model Number Legend
1 2 3
D2JW-01
@ @ @
1. Actuator
None : Pin plunger
K1A :
Short
hinge lever
K1 : Hinge lever
K2 : Hinge roller Lever
K3 :
Simulated
roller lever
2. Contact form
1:
SPDT
2:
SPST-NC
(Molded lead wire models only)
3:
SPST-NO
(Molded lead wire models only)
3.
Terminals
None :
Solder
terminals
-MD : Molded lead wires
List of Models
Actuator
Terminals
Solder terminals
Pin plunger
Molded lead
wires
Solder terminals
Short hinge lever
Molded lead
wires
Solder terminals
Hinge Lever Models
Molded lead
wires
Solder terminals
Hinge Roller Lever
Models
Molded lead
wires
Solder terminals
Simulated Roller Lever
Models
Molded lead
wires
Contact form
SPDT
SPDT
SPST-NC
SPST-NO
SPDT
SPDT
SPST-NC
SPST-NO
SPDT
SPDT
SPST-NC
SPST-NO
SPDT
SPDT
SPST-NC
SPST-NO
SPDT
SPDT
SPST-NC
SPST-NO
Model
D2JW-011
D2JW-011-MD
D2JW-012-MD
D2JW-013-MD
D2JW-01K1A1
D2JW-01K1A1-MD
D2JW-01K1A2-MD
D2JW-01K1A3-MD
D2JW-01K11
D2JW-01K11-MD
D2JW-01K12-MD
D2JW-01K13-MD
D2JW-01K21
D2JW-01K21-MD
D2JW-01K22-MD
D2JW-01K23-MD
D2JW-01K31
D2JW-01K31-MD
D2JW-01K32-MD
D2JW-01K33-MD
Contact form
●SPDT
●SPST-NC
●SPST-NO
COM
NO NC
(Black) (Blue) (Red)
COM
(Black)
NC
(Red)
COM
NO
(Black) (Blue)
The color in parentheses indicates the color of the lead wire.
1
D2JW
Contact Specifications
Specification
Contact
Material
Gap (standard
value)
Inrush current
NC
NO
Crossbar
Gold alloy
0.5 mm
0.1A max.
0.1A max.
5 VDC 1 mA
Permissible
operating
frequency
Sealed Subminiature Basic Switch
Characteristics
Permissible operating speed
Mechanical
Electrical
1 mm to 250 mm/s
(for pin plunger models)
240 operations/min
30
operations/min
100 MΩ min.
(at 500 VDC with insulation tester)
100 mΩ max.
140 mΩ max.
600 VAC 50/60 Hz 1min
1,000 VAC 50/60 Hz 1min
1,000 VAC 50/60 Hz 1min
10 to 55 Hz, 1.5 mm double
amplitude
1,000 m/s
2
{approx. 100G} max.
200 m/s
2
{approx. 20G} max.
1,000,000 operations min.
(60 operations/min)
100,000 operations min.
(30 operations/min)
IEC IP67 (excluding the terminals
on terminal models)
IEC IP67
−40°C
to +85°C (at ambient
humidity of 60% max.)
(with no icing or condensation)
35%
to 98% (for +5°C to +35°C)
Approx. 0.6g (for pin plunger
models with terminals)
Insulation resistance
Contact
resistance
(initial value)
Solder terminal models
Molded lead wire models
Between terminals of the same
polarity
Between current-carrying metal
parts and ground
Between each terminal and
non-current-carrying metal parts
Minimum applicable load (see
note)
D
2
J
W
Ratings
Rated voltage
30
VDC
Resistive load
0.1A
Dielectric
strength * 1
Note. The above rating values apply under the following test conditions.
(1) Ambient temperature: 20±2°C
(2) Ambient humidity: 65±5%
(3) Operating frequency:
30
operations/min
Vibration
Malfunction
resistance * 2
Durability
Shock
resistance
Malfunction * 2
Mechanical
Durability *
3
Electrical
Degree of
protection
Solder terminal models
Molded lead wire models
Ambient operating temperature
Ambient operating humidity
Weight
Note. The data given above are initial values.
*1. The dielectric strength values shown apply for use with Separator (refer
to
page 4).
*2. For the pin plunger models, the above values apply for use at the free
position and total travel position. For the lever models, they apply at the
total travel position. Close or open circuit of the contact is 1ms max.
*3. For testing conditions, consult your OMRON sales representative.
Mounting Holes
(Unit: mm)
M2.3 mounting
screw
hole
4.8
±0.1
Dimensions
(Unit: mm)
/Operating Characteristics
Dimensions and operating characteristics of other actuator models for lead wire models are omitted in the illustration below, as the
dimensions other than the termial part and operatiing characteristics is common with Solder terminal models.
●Pin
plunger models
D2JW-011
Pretravel (PT)
1.6 dia.
A
Operating characteristics
9.4
12.3
2.8
Operating
Position (OP)
Operating Force
Releasing Force
OF Max.
RF Min.
2.45 N {250 gf}
0.98 N {100 gf}
0.6 mm
0.3 mm
0.1 mm
8.1±0.3 mm
+0.05
2.35
−0.025
1.3
1
2
4.8
±0.05
3.95
3.95 3.95
12.7
+0.05
2.35
−0.025
dia.
Pretravel
PT Max.
Overtravel
OT Min.
Movement Differential MD Max.
0.5
5.3
±0.1
0.4
2.5
+0.05
dia.
−0.025
Operating Position
OP
●Short
hinge lever models
D2JW-01K1A1
1.8
Pretravel (PT)
7.95
R11.5
t0.3
Stainless-steel
A lever
3
Operating
Position
(OP) 6.15
2.8
+0.05
2.35
−0.025
Operating Force
Releasing Force
9.4
12.3
1.3
1
2
3.95
3.95 3.95
12.7
4.8
±0.05
+0.05
2.35
−0.025
dia.
OF Max.
RF Min.
1.15 N {117 gf}
0.23 N {23 gf}
5.4 mm
0.7 mm
0.5 mm
8.4±0.8 mm
Pretravel
PT Max.
Overtravel
OT Min.
Movement Differential MD Max.
0.5
5.3
±0.1
0.4
Operating Position
OP
2.5
+0.05
dia.
−0.025
Note 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
Note 2. The operating characteristics are for operation in the A direction ( ).
2
D2JW
●Hinge
lever models
D2JW-01K11
1.8
Pretravel (PT)
R16.5
7.95
A
t0.3
Stainless-steel
lever
Sealed Subminiature Basic Switch
3
Operating
Position
(OP) 6.15
2.8
+0.05
2.35
−0.025
Operating Force
Releasing Force
9.4
12.3
1.3
1
2
4.8
±0.05
3.95
3.95 3.95
12.7
+0.05
2.35
−0.025
dia.
OF Max.
RF Min.
0.80 N {82 gf}
0.15 N {16 gf}
6.4 mm
1.4 mm
0.7 mm
8.4±0.8 mm
Pretravel
PT Max.
Overtravel
OT Min.
Movement Differential MD Max.
0.5
5.3
±0.1
0.4
Operating Position
OP
2.5
+0.05
dia.
−0.025
D
2
J
W
●Simulated
roller lever models
D2JW-01K31
Pretravel (PT)
1.8
7.95
5.35
R1.3
1.3
A
1.9
3
t0.3
Stainless-steel
lever
Operating
Position (OP)
6.15
2.8
+0.05
2.35
−0.025
Operating Force
Releasing Force
9.4
12.3
1.3
1
2
4.8
±0.05
3.95
3.95 3.95
12.7
+0.05
2.35
−0.025
dia.
OF Max.
RF Min.
0.95 N {97 gf}
0.19 N {20 gf}
5.5 mm
1.1 mm
0.6 mm
10.3±0.8mm
Pretravel
PT Max.
Overtravel
OT Min.
Movement Differential MD Max.
0.5
5.3
±0.1
0.4
Operating Position
OP
2.5
+0.05
dia.
−0.025
●Hinge
roller lever models
D2JW-01K21
Pretravel (PT)
1.8
7.95
4.8×2.2 dia.
Polyacetal resin roller
A
R13.5
Operating Position (OP)
6.15
2.8
+0.05
2.35
−0.025
9.4
12.3
1.3
1
2
4.8
±0.05
3.95
3.95 3.95
12.7
+0.05
2.35
−0.025
dia.
Operating Force
Releasing Force
OF Max.
RF Min.
0.98 N {100 gf}
0.19 N {20 gf}
5.2 mm
1.1 mm
0.5 mm
14.6±0.8 mm
Pretravel
PT Max.
Overtravel
OT Min.
Movement Differential MD Max.
0.5
5.3
±0.1
0.4
Operating Position
OP
2.5
+0.05
dia.
−0.025
●Molded
lead wire models
D2JW-01@@@-MD
Pretravel (PT)
0.05
2.35
+−
0.025
Operating
Position (OP)
1.6 dia.
A
+
0.05
2.35
−
0.025
dia.
15.3
2.5
+
0.05
dia.
−
0.025
4.8
±0.05
AVS 0.3
300
±10
3.95
8.7
Operating Force
Releasing Force
OF Max.
RF Min.
2.45 N {250 gf}
0.98 N {100 gf}
0.6 mm
0.3 mm
0.1 mm
8.1±0.3 mm
Pretravel
PT Max.
Overtravel
OT Min.
Movement Differential MD Max.
Operating Position
OP
5
±2
Note. When ordering, replace
@
with the code
for the actuator and contact form that
you need.
COM NO NC
(Black) (Blue) (Red)
12.7
5.3
±0.1
Note 1. Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions.
Note 2. The operating characteristics are for operation in the A direction ( ).
3
D2JW
Precautions
★Please
refer to "Basic Switches Common Precautions" for correct use.
Sealed Subminiature Basic Switch
Cautions
●Terminal
Connection
Before soldering the lead wire to the terminal, first insert the lead
wire conductor through the terminal hole.
Complete the soldering at the iron tip temperature between
350
to 400°C within
3
seconds, and do not apply any external force
D
for 1 minute after soldering. Soldering at an excessively high
2
temperature or soldering for more than
3
seconds may
J
W
deteriorate the characteristics of the Switch.
Correct Use
●Mounting
Use M2.3 mounting screw with plane washers or spring washers
to securely mount the Switch. Tighten the screws to a torque of
0.20 to 0.29 N·m {2 to
3
kgf·cm}.
●Separator
When mounting the Switch on a metallic surface, be sure to
provide a Separator between the Switch and the mounting plate.
●Degree
of Protection
• The Switch was tested and found to meet the conditions
necessary to meet the following standard given below. The
test checks for water intrusion after immersion for a specified
time period, not for switching operation underwater.
JIS C0920:
Degrees of protection provided by enclosures of electrical
apparatus (IP Code)
IEC 60529:
Degrees of protection provided by enclosures (IP Code)
Degree of protection: IP67
(check water intrusion after immersion
for
30
min. submerged 1m
underwater)
●Wiring
Molded Lead Wire Models
When wiring molded lead wire models, ensure that there is no
weight applied on the wire and that the wire is not bent.
Otherwise, damage to the Switch or deterioration in the sealing
may result.
●Protection
Against Chemicals
Prevent the Switch from coming into contact with oil or
chemicals.
Otherwise, damage to or deterioration of Switch materials may
result.
Separator (sold separately)
SEPARATOR FOR D2JW
2-2.4
±0.1
dia.
10.4
5.2
4.8
±0.1
3.6
12
t=0.18
Note. The material of the separator is EAVTC (epoxy alkyd/varnish tetron cloth).
•
Application examples provided in this document
are
for reference only. In
actual applications,
confirm equipment functions
and safety before using
the product.
•
Consult your OMRON representative
before using
the product
under
conditions which
are
not described in the manual or
applying
the product to nuclear control
systems,
railroad
systems, aviation systems,
vehicles, combustion
systems,
medical equipment,
amusement
machines,
safety
equipment,
and
other
systems
or equipment that may have
a serious
influence on lives
and
property if
used
improperly. Make
sure
that the ratings
and
performance characteristics of the product provide
a
margin of
safety
for the
system
or
equipment,
and be sure
to provide the
system
or equipment with double
safety
mechanisms.
Note: Do not use this document to operate the Unit.
OMRON Corporation
ELECTRONIC AND MECHANICAL COMPONENTS COMPANY
Contact: www.omron.com/ecb
Cat. No. B040-E1-03
0812(0207)(O)
4
京公网安备 11010802033920号
EEWORLD
