-
1 Overview
When using remote control encoding and decoding chips, the addresses of a pair of chips are required to be completely consistent. Therefore, when one remote control chip controls mu...[Details]
-
Recently, Guangzhou CanSemi Semiconductor Technology Co., Ltd. (hereinafter referred to as "CanSemi Semiconductor") officially completed the financing of the second phase of the project. This financi...[Details]
-
On June 30, Huang Mian, general manager of Shenzhen Zhongke Sihe Technology Co., Ltd. (hereinafter referred to as "Zhongke Sihe"), delivered a speech at the Xiamen (Haicang) Integrated Circuit Enterp...[Details]
-
According to IHS, the global digital power market is experiencing explosive growth, with digital power and digital power integrated circuits (ICs) expected to see revenue growth of nearly 65% ...[Details]
-
According to the "Shijiazhuang Release", on March 31, the Zhengding 12-inch specialty process semiconductor chip project with a total investment of approximately 8 billion yuan was signed. After comp...[Details]
-
introduction
Looking at the development of the electronics industry, in 1992 only 40% of electronic systems operated above 30 MHz, and most devices used DIP, PLCC and other large-volume, f...[Details]
-
The thyristor zero-crossing trigger KJ007 can trigger the switching process of the bidirectional thyristor at the moment when the power supply voltage is zero or the current is zero. In this way, the...[Details]
-
"Power Supply (PSU)" is actually the abbreviation of "Power Supply Unit". The often mentioned "PC power supply" is actually also an abbreviation. Strictly speaking, "PC power supply" should be call...[Details]
-
Wearable technology company Zinfanite has launched its Voice Activated Badge (VAM), a wireless, voice-controlled connected device that can be worn around a person’s neck or hung in a shirt pocket or ...[Details]
-
On June 3, 2021, WPG Holdings, a leading semiconductor component distributor dedicated to the Asia-Pacific market, announced that its subsidiary Pinjia has launched a TWS Bluetooth 5.1 headphone so...[Details]
-
Use a multimeter to measure the forward resistance of the diode. Different ohm ranges will measure different resistance values. Because the diode is a nonlinear component, it can be seen from its vo...[Details]
-
When using SWD to burn STM32 through J-Flash, various errors will occur; here are the reasons: 1. The reset pin is pulled low. This time I encountered that the capacitor of the reset pin was solder...[Details]
-
The power system uses compensation capacitors to improve the power factor. The working capacity of reactive compensation capacitors is large and the switching is frequent. To ensure the reliability ...[Details]
-
#define BIT_EINT0 (0x1) #define BIT_EINT1 (0x1 1) #define BIT_EINT2 (0x1 2) #define BIT_EINT3 (0x1 3) #define BIT_EINT4_7 (0x1 4) #define BIT_EINT8_23 (0x1 5) #define BIT_CAM (0x1 6) //...[Details]
-
I: Introduction
I have been porting minigui in recent days. I have never used the minigui interface before. I want to see what the effect is and learn it by the way. After all, it is made in Ch...[Details]
FPGA/CPLD
京公网安备 11010802033920号
EEWORLD