EEWORLDEEWORLDEEWORLD

Part Number

Search

ATT-534F-14-SMA-02

Description
RF/Microwave Attenuator, 0 MHz - 8000 MHz RF/MICROWAVE FIXED ATTENUATOR, STAINLESS STEEL
CategoryWireless rf/communication    Radio frequency and microwave   
File Size52KB,1 Pages
ManufacturerArtysen Embedded Technologies
Download Datasheet Parametric View All

ATT-534F-14-SMA-02 Overview

RF/Microwave Attenuator, 0 MHz - 8000 MHz RF/MICROWAVE FIXED ATTENUATOR, STAINLESS STEEL

ATT-534F-14-SMA-02 Parametric

Parameter NameAttribute value
MakerArtysen Embedded Technologies
Reach Compliance Codeunknown
Other featuresSMA-F, I/P POWER-MAX(PEAK)=200W
Nominal attenuation14 dB
structureCOAXIAL
Maximum input power (CW)33.01 dBm
Maximum operating frequency8000 MHz
Minimum operating frequency
Maximum operating temperature125 °C
Minimum operating temperature-65 °C
RF/Microwave Device TypesFIXED ATTENUATOR
Maximum voltage standing wave ratio1.45
Attenuators
DC - 18 GHz
Male/Female
ATT-0532-XX-SMA-02
SMA Subminiature "MINIPAD"
®
Flange Mount type Attenuators are useful in many
system or test instrument requirements where it is
necessary to pass a signal through a panel and
also take advantage of the opportunity to insert an
attenuator while saving valuable space and weight.
These units possess the same high performance
characteristics as the standard 290 series.
The units are manufactured using rugged stain-
less steel construction and are designed to operate
under very hostile environmental conditions.
Flange Mount Types - Low Cost - Inexpensive
Flange Mount 532 Series
Female/Female
ATT-532F-XX-SMA-02
Model Numbers
Male/Male
ATT-532M-XX-SMA-02
XX = Attenuation Value: Select 01-30dB in 1dB increments
LOW COST
DC - 12.4 GHz
Flange Mount 533 Series
Female/Female
ATT-533F-XX-SMA-02
Model Numbers
Male/Male
ATT-533M-XX-SMA-02
SPECIFICATIONS - LOW COST
Attenuation Accuracy
:
DC - 12.4 GHz
1-10 dB
11-20 dB
21-30 dB
+ 0.75 dB
+ 0.75 dB
+ 1.00 dB
12.4 - 18 GHz
+ 0.75 dB
+ 1.00 dB
+ 1.25 dB
VSWR
1.25 max
1.45 max
1.65 max
Male/Female
ATT-0533-XX-SMA-02
XX = Attenuation Value: Select 01-30dB in 1dB increments
LOW COST
VSWR
:
DC - 8.0 GHz
Flange Mount 534 Series
Female/Female
ATT-534F-XX-SMA-02
Model Numbers
Male/Male
ATT-534M-XX-SMA-02
Frequency (GHz)
DC - 4.0
4.0 - 12.4
12.4 - 18.0
Power
:
2 Watts Average @ +25
o
C derated linearly
to .5 watts @ 125C and 200 Watts peak
Operating Temperature Range
:
-65 to +125
o
C
Finish:
Passivated Stainless Steel
Male/Female
ATT-0534-XX-SMA-02
XX = Attenuation Value: Select 01-30dB in 1dB increments
LOW COST
-
Improved VSWR
DC - 4.0 GHz
Flange Mount 535 Series
Female/Female
Model Numbers
Male/Male
ATT-535M-XX-SMA-02
Male/Female
ATT-0535-XX-SMA-02 ATT-535F-XX-SMA-02
XX = Attenuation Value: Select 01-30dB in 1dB increments
LOW COST
-
Improved VSWR
DC - 2.0 GHz
Flange Mount 536 Series
Female/Female
ATT-536F-XX-SMA-02
Model Numbers
Male/Male
ATT-536M-XX-SMA-02
Typical End View - All Models
Male/Female
ATT-0536-XX-SMA-02
XX = Attenuation Value: Select 01-30dB in 1dB increments
LOW COST
15
MSP430F5529 ADC Reference Sampling Example
[i=s]This post was last edited by fish001 on 2019-9-10 19:05[/i]Sampling example/*!* COPYRIGHT NOTICE* Copyright (c) 2016,CTGU-GB* All rights reserved.*** @file main.c* MSP430F5529 platform main progr...
fish001 Microcontroller MCU
[ST MEMS waterproof pressure sensor LPS27HHW review] + comparison and application between 2 drivers (and final report)
[i=s]This post was last edited by jinglixixi on 2021-2-11 01:14[/i]Because the driver of LPS27HHW was blocked, the evaluation process was slowed down. Fortunately, with the guidance and help of the ad...
jinglixixi MEMS sensors
The problem of mutual influence between the operational amplifier voltage follower circuit and the amplifier circuit in parallel
[i=s]This post was last edited by flyriz on 2020-4-23 19:58[/i]Hello everyone, as shown below:An AC input signal is input to the input end of a voltage follower circuit and an amplifier circuit. The p...
flyriz Analog electronics
Help: What is the problem with low output voltage of DCDC circuit?
The DCDC circuit design in the figure below has an input of 20-36V and is required to output 19.5V. When the current reaches more than 350mA, the voltage drops to about 10V. The input power supply is ...
灞波儿奔 Power technology
What does CGSN in AT+CGSN stand for? Where can I find the full name table corresponding to the AT command abbreviation?
1. AT+CGMI gives the module manufacturer's identification.2. AT+CGMM gets the module identification. This command is used to get the supported frequency bands (GSM 900, DCS 1800 or PCS 1900). Whenthe ...
一沙一世 MCU
Implementation of HPI Boot Mode in TMS320C62x
[size=4] The first step to implement the HPI boot mode of TMS320C62x is to generate the HPI boot DSP code and merge it with the main processor application so that the DSP application can be remotely d...
灞波儿奔 DSP and ARM Processors

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号