I took a fancy to these two products and they happened to be on MPS promotion, so I placed an order immediately.The delivery speed was very fast, the box was unexpectedly large, and it protected the p...
I have been paying attention to some foreign forums recently. The discussion atmosphere was very good before, but in the past two years, I found that the content has become more and more watery, espec...
For example, when gs is 0, the current flowing from d to s can be blocked, but due to the presence of the parasitic diode, the current flows from s to d. In short, when MOS is used as a switch, it can...
Sometimes I encounter inexplicable problems when developing Renesas with KEIL, and it runs out of control; I can switch to e2 studio. This time I used e2 studio to develop
There are several ADC inputs...
This Renesas chip has DAC function, which is very powerful. RA2L1 has one output channel with a resolution of 12 bits.If we directly input a 12-bit digital value and then operate the DAC trigger sourc...
Preface
Previously, we experienced development using MDK. This time, we will experience the official development environment. MPLAB X IDE+XC32 compiler+MPLAB Harmony v3 is the official tool chain.
Pre...
Qualcomm and Thales Launch World’s First GSMA-Compliant iSIM Card Based on Latest Snapdragon Mobile Platform
Key points:
•
The two companies announced that they ...[Details]
Emitter-Follower Boosts Linear Regulator's Output Current
Additional Information:
Quick View Data Sheet for the
MAX1616
Technical Support: Power
Automotive...[Details]
1. Introduction
The Hall Effect is the most common method for measuring magnetic fields, and
Hall Effect
is widely used and widely used in modern times. For example, they ...[Details]
July 7, 2021, Beijing - Today, at the 2021 Beijing International Road Transport, Urban Bus, Tourist Passenger Vehicles and Parts Exhibition (hereinafter referred to as the "Road Transport Vehicle Exh...[Details]
1. Detection of color-coded inductors. Set the multimeter to R×1, and connect the red and black test leads to any lead-out terminal of the color-coded inductor. The pointer should swing to the righ...[Details]
01 Why does the motor with inverter shake?
1. The encoder signal detection is inaccurate or the signal line contact is poor.
Check the encoder itself and then check the signal cable...[Details]
On August 26, the first batch of DC smart street lamp projects, a multifunctional composite pole demonstration project led by State Grid Xiong'an New Area Power Supply Company, was launched at the ...[Details]
On December 10, the People's Government of Lijiang City and Beijing Green Vanadium New Energy Technology Co., Ltd. (hereinafter referred to as Beijing Green Vanadium) held a signing ceremony in Beijin...[Details]
This article introduces the main features of TPS92310, block diagram, typical application circuit diagram, isolated and non-isolated topology circuit diagrams
Figure 1. TPS92310 block...[Details]
This article is translated from Semiwiki The market for medical chips is heating up as sensor and processing technologies mature, seeing frenetic activity from system companies and startups looking...[Details]
The general purpose timer of STM32 is a 16-bit auto-load counter (CNT) driven by a programmable prescaler (PSC). The general purpose timer of STM32 can be used to measure the pulse length of the inpu...[Details]
There are several regulation and braking processes related to DC separately excited motors, including the motor forward starting acceleration process, forward weak magnetic speed increase regulatio...[Details]
On the afternoon of October 9, 2024, China Sodium Energy Storage Technology Co., Ltd. (hereinafter referred to as "China Sodium Energy Storage") was invited by Northwest Nonferrous Geology and Mini...[Details]