The NMOA8200 series product line is a family of state-of-the-art
high performance CATV erbium doped fiber amplifiers (EDFA) or
erbium/ytterbium doped fiber amplifiers (EYDFA). Packaged in a
convenient 2RU housing, this line of fiber amplifiers uses the latest
DSP technology at the core of electrical control circuitry resulting in
superior output power stability & exceptionally low noise figures
demanded by CATV applications.
The NMOA8200 provides very stable optical outputs over a wide
operating temperature range. Internally it is supported with input
and output isolators for enhanced system stability and
performance. Optical power is continuously monitored at the input
and output for automatic power control during operation over a
wide operating temperature range.
The NMOA8200 offers a rich set of features. These include remote
management capability through SNMPv2 and telnet. The
NMOA8200 also supports MIBs specified by SCTE (Society of
Cable Television Engineers) for this product class. Additionally, the
front panel’s LCD and button provides the operator with the option
to both monitor the status of the amplifier and control/operate the
amplifier locally.
1 of 4
For more information on this and other products:
Contact Sales at EMCORE 626-293-3400, or visit www.emcore.com.
NMOA8200 Series Fiber Amplifier
PRELIMINARY DATA SHEET | OCTOBER 9, 2008
Optional Features
•
•
•
Automatic power control and/or automatic
gain control modes.
Port count, optical power, and connector
style options
Integrated per channel WDM for FTTx PON
applications
Monitors and Alarms
•
•
•
•
•
•
•
Loss of input signal
Loss of output power
Pump laser diode bias current
Pump LD Temperature
Case Temperature
Redundant Power Supplies
Redundant Fans
Electrical Characteristics
PROPERTY
AC Power Supply Voltage
DC Power Supply Voltage
Power Consumption
SYMBOL
V
AC
V
DC
P
TOT
MIN
85
-36
-48
TYP
MAX
265
-72
80
UNIT
V
AC
V
DC
W
Note 1: 80 W valid at 0 dBm input and 35 dBm output power within specified operating temperature range. Contact Emcore Sales for specific model datasheets.
General Optical Characteristics
PROPERTY
SYMBOL
MIN
TYP
MAX
UNIT
Wavelength Range
Input Power
Total Output Power Options
Note 1
Output Power Delta to Nominal
Note 2
V
AC
P
IN
P
OUT
P
OUTΔ
-
NF
ISO
LOS
I
MON
O
MON
1545
-10
30
-0.5
1
1550
0
1562
12
35
0.5
64
6.0
nm
dBm
dBm
dB
Output Port Count Options (SC)
Notes 1, 3
Noise Figure
Note 4
Optical Isolation
Input Power Alarm
Input Monitor Loss
Output Monitor Loss
Note 2: Valid for 1-20 ports. 32 ports and 64 ports have larger deltas.
Note 3: Model types are specified by output power per port
Note 4: Test Condition with Input Power = 0 dBm (@ 1550nm)
Note 5: Specifications valid within operating temperature range.
dB
dB
30
-12
22
19
-11
23
20
-10
24
21
dBm
dB
dB
Note 1: Total output power and number of ports varies by model type. Contact Emcore Sales for model specific datasheets
Absolute Maximum Ratings
PROPERTY
Operating Temperature Range
Storage temperature Range
Relative Humidity
SYMBOL
TO
TS
H
MIN
0
-40
0
TYP
MAX
50
85
95
UNIT
o
C
o
C
%
2 of 4
EMCORE Broadband
2015 West Chestnut Street
Alhambra, California 91803-1542
Tel: 626-293-3400
Fax: 626-293-3428
www.emcore.com
Copyright 2008. EMCORE Corporation
NMOA8200 Series Fiber Amplifier
PRELIMINARY DATA SHEET | OCTOBER 9, 2008
Outline Drawing
3 of 4
EMCORE Broadband
2015 West Chestnut Street
Alhambra, California 91803-1542
Tel: 626-293-3400
Fax: 626-293-3428
www.emcore.com
Copyright 2008. EMCORE Corporation
NMOA8200 Series Fiber Amplifier
PRELIMINARY DATA SHEET | OCTOBER 9, 2008
Model Number Information
NMOA8200
Integrated WDM
□□□
–
□□□□
–
□
0
□□
Number of
Output
Ports
01
– 1 port
02
– 2 ports
04
– 4 ports
08
– 8 ports
16
– 16 ports
20
– 20 ports
32
– 32 ports
64
– 64 ports
Optics
Output
Location
0
– Front
1
– Rear
Power Supply
1
– SC/APC
2
– FC/APC
4
– SC/UPC
5
– FC/UPC
Output Power per
Port
xx
– xxdBm/port
(Maximum: xx =
35dBm
for 1 port)
BLANK
– None
WDM
–
1310/1490/1550
WDM present
1
– AC primary, no
secondary
2
– DC primary, no
secondary
3
– AC primary, AC
secondary
4
– AC primary, DC
secondary
5
– DC primary, DC
secondary
Note 1: Not all configurations are available, please contact your EMCORE Sales representative.
e.g. NMOA8200-2116-1003 (EYDFA, 21 ports, 16 dBm/port, SC/APC, front fiber, dual DC)
e.g. NMOA8200WDM-1620-1005 (EYDFA with integrated WDM, 16 ports, 20 dBm/port, SC/APC, front fiber, dual DC)
Laser Safety Information
FDA/CDRH Class IIIb and IEC 60825 Class 3B laser product
All versions are Class 3B laser products per IEC 60825-1:1993
Caution: Use of controls, adjustment and procedures other than those specified heirin may result in hazardous
laser radiation exposure.
Information contained herein is deemed to be reliable and accurate as of issue date. EMCORE reserves the right to change the design or specifications of
the product at any time without notice. EMCORE, and the EMCORE logo are trademarks of EMCORE Corporation.
This book provides a relatively systematic introduction to electromagnetic compatibility design from the aspects of component selection, circuit design, printed circuit board design, grounding, shield...
Live broadcast time
July 28 (Tuesday) 20:00-21:30 ( The live broadcast you want to watch in the evening is here)
Live AgendaIntroducing DLP automotive products, their applications in automobiles and r...
The two development boards communicate with each other through a network cable. Now we need to design the two boards into one board, eliminating the crystal head and network cable, connect the network...
1. Measurement quality: When measuring, the multimeter should be set to the r×100 or r×1k block (r×1 or r×10k block cannot be used, the former has too much current, and the latter has too high a batt...[Details]
To learn about microcontrollers, you must have basic knowledge of analog and digital circuits, basic computer theory and operation knowledge, and understand the basic rules and statements of C languag...[Details]
"Low carbon" has gradually become a hot word, and it is becoming the attributive or prefix of nouns such as office, travel, and home.
This newspaper has launched the "My Low-Carbon Strategy" c...[Details]
A few days ago, we took stock of the changes in the new energy vehicle industry in 2022. The continued rise in battery prices has made the relationship between car companies and battery factories del...[Details]
Abstract: Aiming at the requirements of variable frequency amplitude modulation of modern power supply, this paper proposes to use PIC16F873 to generate SPWM wave to control IR2136 to trigger IGBT...[Details]
On August 28, the Ministry of Commerce and the Ministry of Science and Technology adjusted and released the "Catalogue of Technologies Prohibited and Restricted from Export in China". What is the sig...[Details]
Back to 3 years ago, on July 28, 2017, Panyu, GAC New Energy Automobile Co., Ltd. was officially registered and established. This young company located in the suburbs of Guangzhou will carry the futu...[Details]
With motors now responsible for two-thirds of industrial electricity consumption and one-quarter of residential electricity consumption, motor efficiency continues to receive greater attention. Stand...[Details]
introduction
LED lighting
has quickly gained popularity among users
for
its advantages of high
luminous efficiency
, long service life,
simple
brightness
...[Details]
The world's first network analyzer 8410A Based on the need to measure RF interfaces and devices, HP invented the first network analyzer 8410A in 1967. The invention of 8410A moved impedance measure...[Details]
1. Experimental task
: Use adjustable resistor to adjust voltage value as input quantity of simulated temperature. When temperature is lower than 30℃, long beep and light alarm will be issued. When...[Details]
Modern telecommunication systems require wider bandwidth, faster data rates, tighter confidentiality measures, updated performance, more users and extensive user features, which has prompted the po...[Details]
5.1 sound processing is currently a relatively perfect sound solution that can meet the super requirements of computer games and home audio and video. Traditional two-channel audio has therefore withd...[Details]
Function of the circuit
Use a multiplication DA converter and a P-ROM that stores sine data to output the Y (Y=R.SINθ) function (in Figure A, X and Y are coordinates, R represen...[Details]
PCB Design
京公网安备 11010802033920号
EEWORLD
