Superior Jitter Performance (comparable to SAW based)
APR of ±50 or ±100ppm over industrial temperature range
Frequencies from 150 MHz to 1.4 GHz
Designed for a short 2 week cycle time
QiK Chip™
Product Description
The M320x series of VCXO’s is designed with a hermetically sealed high precision AT cut quartz crystal, com-
bined with our QiK Chip
TM
technology. This combination provides an industry setting 0.35 ps RMS jitter perfor-
mance and excellent Phase Noise for your demanding circuit. The M310x is available in LVPECL, LVDS, or
CML output and can be built to a variety of power requirements, 3.3, 2.5, and 1.8V. Tight thermal stability per-
formance, broad frequency range, an industry standard 9x14mm package, and the ability to build and provide
product in approximately 2 weeks, gives the designer a quick, solid foundation to build a solution with.
Product Applications
Telecommunications such as SONET / SDH /
DWDM / FEC / SERDES / OC-3 thru OC-192
Wireless base stations / WLAN / Gigabit Ethernet
xDSL, Network Communications
Avionic Flight Controls
Military Communications
Clock and Data Recovery
Low Jitter Clock Generation
Product Ordering Information
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
Revision: 8-22-08
M320x Series
9x14 mm, 3.3/2.5/1.8 Volt,
LVPECL/LVDS/CML, VCXO
Performance Characteristics
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
2
M320x Series
9x14 mm, 3.3/2.5/1.8 Volt,
LVPECL/LVDS/CML, VCXO
Phase Noise Plot
Output Waveform
Output Waveform: LVDS/CML/PECL
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
3
M320x Series
9x14 mm, 3.3/2.5/1.8 Volt,
LVPECL/LVDS/CML, VCXO
Product Dimension & Pinout Information
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
4
M320x Series
9x14 mm, 3.3/2.5/1.8 Volt,
LVPECL/LVDS/CML, VCXO
Handling Information
Although protection circuitry has been designed into the M320x oscillator, proper precautions should be taken to
avoid exposure to electrostatic discharge (ESD) during handling and mounting. MtronPTI utilizes a human-body
model (HBM) and a charged-device model (CDM) for ESD-susceptibility testing and protection design evaluation.
ESD voltage thresholds are dependent on the circuit parameters used to define the mode. Although no industry-
wide standard has been adopted for the CDM, a standard HBM (resistance = 1500
Ω,
capacitance = 100 pF) is
widely used and therefore can be used for comparison purposes. The HBM ESD threshold presented here was
obtained using these circuit parameters.
Quality Parameters
Part Marking Guide
Line 1: Model Number
Line 2: Frequency
Line 3: Date Code
Line 4: Pin 1 Indicator / MtronPTI
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
TI Award Live: Current and Voltage Measurement Solutions in Servo Drives are now open for registration~Click here to registerLive broadcast time
August 27, 10:00-11:30amLive Topic
Solutions for curren...
The system clock is the heart and power source of the chip, so we start with the clock. The subsequent ADC and TIM are all based on the clock.
In STM32F746, there are 5 most important clock sources: H...
The design of analog circuits is the most troublesome but also the most fatal design part for engineers! We have summarized the issues that should be paid attention to in analog circuit design and sha...
Electronic circuit and EMI/EMC design analysis[ Print ][ Return ]For a good electronic product, in addition to the functions of the product itself, the technical level of circuit design and electromag...
1 System Overview
As shown in the figure, this is the principle block diagram of the entire video acquisition system. At the beginning of power-on, the FPGA needs to initialize the register configurat...
First of all, I would like to thank Digi-KeyEEWORLD for providing the opportunity.
I placed an order with Digi-Key on the evening of June 15th, and received a notification from SF-Express on the 27th ...
On March 18, the high-end car brand Lynk & Co held an online global "Lingxiang Conference", live-streaming the "crazy design, no cost" to create a number of black technologies for the 05 model, showi...[Details]
1. Say it in advance 1. Today I borrowed a 51 microcontroller basic tutorial from the library, from which I learned some basic knowledge about microcontrollers. 1-1: A single-chip microcomputer is a ...[Details]
With the advent of the new energy era, many high-quality and low-priced models are also arriving one after another. However, in terms of the current domestic situation, due to the imperfect infrastru...[Details]
The latest report from display supply chain consulting firm DSCC shows that Apple is expected to launch a 27-inch iMac Pro in the spring of 2022, equipped with a Mini-LED display and ProMotion adapti...[Details]
When LEDs were first used in the 1960s, they were only used as display lights and signal lights because of their low power consumption, so the problem of package heat dissipation did not arise. How...[Details]
Intelligent monitoring system for low voltage AC distribution cabinet based on MODBUS communication protocol
This paper introduces a low-voltage switch cabinet intelligent monit...[Details]
MWC2012 has not officially started yet, but many chip manufacturers have already announced their own quad-core flagship products, including Nvidia Tegra3, Qualcomm Snapdragon S4, Samsung Exynos, Hu...[Details]
The 1.6 billion acquisition of Jiangfeng Electronics, a target material leader that has attracted much attention in the A-share market, was rejected by the Merger and Acquisition Committee of the Chi...[Details]
According to statistics from the Shaanxi Semiconductor Industry Association, the sales of the semiconductor industry in Shaanxi Province in 2020 was 123.62 billion yuan, a year-on-year increase of 29...[Details]
Compared with traditional light sources, light-emitting diodes (LEDs) have many advantages, such as low operating voltage, high energy efficiency, small size and directional light. They can provide...[Details]
According to the photoelectric effect, the PN junction can change its resistivity under the stimulation of light, and LED is also a PN junction, so can the PN junction characteristics of LED be used ...[Details]
In the HUB-RPA project, the F340 GPIO output is only 3.3V. Using it to control the on and off of USB 5V with only one PMOS has problems. After the circuit is modified as follows, the on and off of ...[Details]
On January 15, 2010, the National Key Laboratory of Solar Photovoltaic Power Generation Technology was established at Yingli Group in Baoding, Hebei. Relevant leaders and personnel from the Basic Rese...[Details]
Over the past few years, several major international standards organizations, including the U.S. Environmental Protection Agency (EPA) Energy Star program, the European Commission's Code of Conduct (...[Details]
Generally speaking, customers are concerned about the following issues: quality, performance, price, and delivery time.
Quality. It is impossible for a manufacturer to have no quality problems...[Details]