The location of the current sense resistor, along with the switching regulator architecture, determines the current to be sensed. The sensed currents include the peak inductor current, the valley indu...
[i=s] This post was last edited by Yunhu Congbai on 2022-1-28 17:44 [/i] ## Preface I was so happy for a while, but after checking the datasheet in detail, I found that it does not support SLCD. I was...
Date and Location:November 3, 2020ShenzhenNovember 5, 2020ShanghaiLecturer: Several senior application engineers from TI2020 TI Embedded Product Offline Workshop - MSP430 Entry-level Training is here!...
Connect the wires as above. Then, connect the jumper cap and set the serial port parameters.The baud rate is 57600. Thank you Qin Heng and eeworld.This content is originally created by EEWORLD forum u...
[i=s]This post was last edited by dj狂人 on 2021-8-24 10:30[/i]Hey guys, I have a question. As shown in the figure below, the program storage space of this single chip is in OTP format. I have never und...