This material offers UL94 V-0 flame retardancy* and a high impact strength. This material has a melt point of 290-340°C and is suitable for use in
the majority of automatic soldering processes.
*Material test thickness 1.6mm
LEDs
LED Polarity
Anode identification is shown in the dimensional diagram. The long lead of a non-cropped unit can also be used to help identify the anode. For
the 2 pin Bi-colour units the standard colour configuration is red anode to the ‘+’ sign.
Reverse Polarity
This is offered on all PCB units, with the exception of the 125 series, if requested to help overcome the problem of systems with reverse polarity
reverse colour configuration.
Bi-colour
2 Pin Operation
connections. Multiple units can also be supplied in reverse polarity but not with mixed polarities. The 2 pin and 3 pin Bi-colours can be supplied in
T
o acheive the second colour for a 2 pin Bi-colour unit the supply must be reversed, standard colour configuration for these units is red anode to
the ‘+’ sign.
Electro-static Discharge (ESD)
Build up of electrostatic discharge occurs in many situations involving people moving and handling products. The range of possible situations is
very diverse but voltage levels as high as several thousand volts can and do arise in many individual situations. When an operator charged up to
these levels handles a ‘static sensitive device’, there is a very probable likelihood that the device will be irreversibly damaged. It is essential that
precautions are taken at all stages during manufacture and assembly of these products. Although LEDs were never considered to be static
sensitive devices, changes in manufacturing technology and materials used to produce higher intensityproducts over a large range of the
and despatch. We recommend all users of LED based products follow the guidelines of BS 100015.
Note:
All luminous intensity figures refer to the unmodified discrete LED.
wavelength spectrum have changed this. Marl has an approved system of ESD control from goods in, through production and into final packing
The Radio and Television Administration plans to increase the number of 700MHz 5G base stations to 280,000 this year.
At the opening ceremony of the 2022 World Telecommunication and Information Societ...
1. Introduction
In preparation for the subsequent demo, we transplanted RTThread. Why not transplant FreeRTOS? Because domestic chips should use domestic systems! So let's get started!
2. Transplantat...
Company: A joint venture between a listed company and a company to be listed, with more than 20 years of technological accumulation, more than 100 Tier 1 and car manufacturer customers as its backing,...
[i=s]This post was last edited by jinglixixi on 2021-11-12 10:22[/i]The initial development board supports AT command testing, which can be done with the help of serial port debugging tools.1) AT comm...
This experiment uses TIM1 to generate a three-phase BLDC motor control waveform, which is the so-called six-step commutation control waveform.
The relationship between the output signals and images of...
RF/Wirelessly
京公网安备 11010802033920号
EEWORLD
