440AM075NF08

FLASH Control Register 1 (FLASH_CR1) Address offset value: 0x00 Reset value: 0x00 Position 7:4 Reserved bit, must remain 0 Bit 3 HALT: Power down in Halt mode This bit can be set or cleared by so...[Details]

Hardware environment: stm32f103vet6, JLink_v8 Software environment: Keil_MDK Debugging process: First, you need to connect the lines. Using JLink_v8 requires connecting 5 lines, namely VCC, nJTRS...[Details]

#include linux/miscdevice.h #include linux/kernel.h #include linux/module.h #include linux/init.h #include linux/fs.h #include linux/types.h #include linux/errno.h #include linux/ioctl.h #inc...[Details]

I use stm8af62a6, stm8s and stm8af are mostly interoperable, only one library function is used 62a6 can only use uart3! The 485 interface is hardware, no need to worry about it, any hardware wiring...[Details]

      YB1600 series digital signal generator. YB1600 series function signal generator is a new type of high-precision signal source. The instrument has beautiful and novel appearance, intuitive and c...[Details]

　　Pressure detector is a measuring instrument, which has certain applications in many industries. There are three pressure measurement methods for pressure detectors: liquid column pressure measuremen...[Details]

China Great Wall Technology Group Co., Ltd. (hereinafter referred to as "China Great Wall") stated on the investor interaction platform that the news that the company has successfully developed the c...[Details]

The S3C2440 has eight channels of 10-bit ADC with a maximum conversion rate of 500KSPS at a 2.5MHz A/D converter clock. The A/D converter supports on-chip sample-and-hold functions and power-down mod...[Details]

Waabi, an autonomous truck technology startup, has launched a key component of its technology expansion strategy: a high-fidelity closed-loop simulator, Waabi World, which can not only virtually test...[Details]

1. Turn on the LCD backlight Set the GPIO corresponding to the LCD backlight to disable pull-up (write 1 to the corresponding bit of GPxUP), select the output type (write 01 to the corresponding bit ...[Details]

　The digital multimeter calibrator is used to calibrate multimeters and various meter heads below level 1. If used improperly, the meter being tested and the internal circuit of the instrument will b...[Details]

Until now, the brake lights, turn signals, reverse lights and rear fog lights of cars have used 21W to 27W tungsten bulbs with a brightness of 280 to 570 lumens as light sources. Tail lights, parking...[Details]

This article introduces several simple methods to correctly identify the positive and negative electrodes of old batteries, so that everyone can make quick judgments when charging or testing by thems...[Details]

Texas Instruments has integrated DAC and 4-20mA output drivers, as well as ultra-low power microcontrollers MSP430 . These chips allow you to design sensor solutions at a lower cost and lower p...[Details]

Recently, Tang Chuanle, deputy director of Shandong Nuclear Power Equipment Manufacturing Co., Ltd. (hereinafter referred to as: Shandong Nuclear Power Equipment), led a team to visit the Liquid Fl...[Details]